Patent application number | Description | Published |
20080198902 | HOPPING STRUCTURE FOR CONTROL CHANNELS - Systems and methodologies are described that facilitate transmitting and receiving control data according to hopping patterns where the hopping patterns are defined based in part on bandwidth capabilities of a device transmitting the control data and bandwidth of the network on which the data is being transmitted. In this regard, devices having lower bandwidth capabilities than the network can hop within given frequency blocks reserved for control data assuming the blocks are no greater than the bandwidth of the device. Devices having greater or substantially equal bandwidth capabilities as the network can hop across disparate frequency blocks of the network reserved for control data as the device can handle substantially any hop in frequency. This preserves frequency diversity for control channels in multiple device types regardless of device bandwidth capabilities. | 08-21-2008 |
20080200203 | APPARATUS AND METHOD FOR UPLINK POWER CONTROL OF WIRELESS COMMUNICATIONS - Systems and methodologies are described that facilitate employing periodic closed loop power control corrections in a wireless communication environment. A periodic power control command can be sent over a downlink to control and/or correct an uplink power level employed by an access terminal. Each periodic power control command can be generated based upon an uplink periodic transmission sent from the access terminal. The periodic power control commands can be communicated via a Physical Downlink Control Channel (PDCCH) or in-band signaling. Moreover, access terminals can be grouped to enhance efficiency of downlink transfer of the periodic power control commands. The periodic power control commands can be halted upon access terminal uplink resources being deallocated. For instance, these resources can be deallocated after an inactivity period of the access terminal. Thereafter, the access terminal can initiate random access (e.g., leveraging open loop mechanisms) to resume periodic power control command transmission. | 08-21-2008 |
20080205348 | MAPPING UPLINK ACKNOWLEDGEMENT TRANSMISSION BASED ON DOWNLINK VIRTUAL RESOURCE BLOCKS - An acknowledgment (ACK) mapping automation that reduces overhead for a wireless communication systems such as UTRAN-LTE, Global System for Mobile communications (GSM: originally from Groupe Spécial Mobile), High-Speed Downlink Packet Access (HSDPA), or any packet-switched system, by providing a mapping of uplink (UL) location (i.e., modulation location in time, frequency and code) based upon a downlink (DL) allocations. Aspects address dynamic and persistent scheduling of user equipment (EU) with a selected combination of implicit and explicit mapping. | 08-28-2008 |
20080207150 | PREAMBLE BASED UPLINK POWER CONTROL FOR LTE - Systems and methodologies are described that facilitate utilizing power control preambles with closed loop power control techniques in a wireless communication environment. An uplink grant can be transferred over a downlink (e.g., a first uplink grant after uplink inactivity), and a power control preamble can be sent over an uplink in response to the uplink grant. According to an example, transmission of the power control preamble can be explicitly scheduled and/or implicitly scheduled. The power control preamble can be transmitted at a power level determined by an access terminal utilizing an open loop power control mechanism. A base station can analyze the power control preamble and generate a power control command based thereupon to correct the power level employed by the access terminal. The access terminal can thereafter utilize the power control command to adjust the power level for uplink data transmission. | 08-28-2008 |
20080212520 | METHOD AND APPARATUS FOR FREQUENCY HOPPING WITH FREQUENCY FRACTION REUSE - A method and apparatus for a wireless communication system, for frequency hopping using frequency fraction reuse scheme. The frequency hopping pattern is generated by dividing a portion of frequency into plurality of sub-bands, dividing a portion of time into plurality of sectors, each sector comprising the divided sub-bands, designating one of the divided sub-band within one of the sectors as the restricted sub-band, and allocating a location the designated sub-band as a restricted sub-band. | 09-04-2008 |
20080214198 | FLEXIBLE CHANNEL QUALITY INDICATOR REPORTING - System(s) and method(s) are provided that facilitate a flexible channel quality indicator (CQI) reporting directives or policies. A CQI reporting directive delivers an improved tradeoff between reporting accuracy and overhead by establishing subband-specific reporting periods, reporting repetitions, or power requirements. The CQI reporting directive is based at least in part on channel conditions, traffic requirements, and scheduling techniques. Automated optimization and negotiation of a CQI reporting directive based on communication performance is also incorporated. | 09-04-2008 |
20080225796 | HANDOVER IN WIRELESS COMMUNICATIONS - Systems and methodologies are described that facilitate handing over mobile device communications in a wireless network from a source base station to a target base station without using a random access channel (RACH). In this regard, the mobile device can monitor multiple base stations determining timing information related thereto and access scheduling request channels for the base stations. When ready for handover, the mobile device can request data resources over the scheduling request channel using the appropriate timing information. | 09-18-2008 |
20080225993 | HYBRID PILOT CONFIGURATION - Systems and methodologies are described that facilitate employing a hybrid pilot configuration in a wireless communications network. A hybrid pilot configuration includes common pilot symbols and dedicated pilots multiplexed together within a time transmission interval. The multiplexed pilot symbols can be received and utilized to demodulate channels. Common pilot symbols can be employed to demodulate control channels and dedicated pilot symbols can be utilized to demodulate data channels. Moreover, the dedicated pilot symbols can be employed to generate a channel estimate. The common pilot channels can be utilized in combination with the dedicated pilot symbols to augment the channel estimate. | 09-18-2008 |
20080233967 | BACKHAUL COMMUNICATION FOR INTERFERENCE MANAGEMENT - System(s) and method(s) are provided for inter-cell interference management in a wireless communication system. A base station perform interference management by conveying and receiving load indicator messages over a backhaul communication link to disparate neighboring base stations that serve interfering mobile stations. Reporting of load indicators takes place according to a reporting policy that is event-based, and accounts for variations of interference metrics over available time-frequency resources. Communication with neighboring base stations is limited to a monitoring interference set, which can be determined statically, according to deployment characteristics of a wireless network, or the set can be adjusted dynamically according to a set of received UL signals or a set of DL CQI measurement reports. Reporting policy and interference set can be autonomously adapted to optimize backhaul traffic as well as interference control. | 09-25-2008 |
20080247358 | METHOD AND APPARATUS FOR CHANNEL SENSITIVE SCHEDULING IN A COMMUNICATION SYSTEM - Method and apparatus for a channel sensitive scheduler for scheduling transmissions in a communication system. The scheduler is defined by a priority function of the channel condition as determined by amount of transmission power needed by a mobile station. In one embodiment the channel condition is determined based on the transmission pilot power of each mobile station and is used to calculate a priority value for each mobile station. The mobile stations are then scheduled to transmit based on the priority value. | 10-09-2008 |
20080247364 | CYCLIC DELAY DIVERSITY AND PRECODING FOR WIRELESS COMMUNICATION - Techniques for sending a MIMO transmission using a combination of cyclic delay diversity and precoding are described. A set of delays (e.g., zero delay, small delay, and large delay) for cyclic delay diversity and a set of precoding matrices may be supported. In one design, a Node B may select a delay specifically for a UE or for a set of UEs served by the Node B. In another design, a UE may evaluate different combinations of precoding matrix and delay, determine the combination with the best performance, and send this combination of precoding matrix and delay to the Node B. The Node B may perform precoding with the precoding matrix and then processing for cyclic delay diversity based on the selected delay. Alternatively, the Node B may perform processing for cyclic delay diversity based on the selected delay and then precoding with the precoding matrix. | 10-09-2008 |
20080253318 | Configurable Acknowledgement Processing in a Wireless Communication System - Techniques for sending and receiving acknowledgement (ACK) information in a wireless communication system are described. A base station sends control information and data to a user equipment (UE) and receives ACK information from the UE. The base station performs detection for the ACK information based on (i) a first hypothesis for the control information being missed by the UE and (ii) a second hypothesis for the control information being received correctly by the UE. In one design, the ACK information may have a variable size, and the base station may perform detection for the ACK information based on different block codes for the first and second hypotheses. In another design, the ACK information may have a fixed size, and the base station may perform detection for the ACK information based on a single block code and obtain a fixed number of bits for the ACK information for both hypotheses. | 10-16-2008 |
20080261645 | INTERFERENCE AND POWER CONTROL FOR WIRELESS COMMUNICATION - Techniques for performing interference and power control in a wireless communication system are described. An asymmetric power control scheme adjusts the transmit power of a user equipment (UE) in an asymmetric manner, e.g., with different up and down step sizes. In one design, a parameter value may be determined based on received SINR of at least one Node B. Up and down steps may be determined based on the parameter value and may have different sizes. At least one overloading indicator from at least one neighbor Node B may be obtained. The transmit power of the UE may be adjusted based on the up and down steps and the at least one overloading indicator. For example, the transmit power may be increased by the up step if an overloading indicator from the strongest neighbor Node B is not received and may be decreased by the down step otherwise. | 10-23-2008 |
20080267317 | PILOT STRUCTURE WITH MULTIPLEXED UNICAST AND SFN TRANSMISSIONS - Systems and methodologies are described that facilitate multiplexing unicast reference symbols and multicast transmissions in the same transmission time interval. In particular, mechanisms are provided that enable multiplexing unicast reference symbols to single frequency network transmissions that utilize a longer cyclic prefix duration. Unicast reference symbols are sent in a first symbol of a slot containing both unicast and single frequency network transmissions. The frequency utilized for the unicast reference symbols is staggered between the first symbol and a subsequent symbol in a sub-frame. | 10-30-2008 |
20080273513 | METHOD AND APPARATUS FOR UL ACK ALLOCATION - Systems and methodologies are described that facilitate allocation of uplink acknowledgement (ACK) resources for a wireless communication system. Various aspects described herein facilitate explicit creation and transmission of a bundled assignment of downlink communication resources and uplink resources for ACK transmission, thereby facilitating overhead-efficient ACK allocation for users that can communicate pursuant to a persistent resource assignment without requiring scheduling information from an associated control channel. Additionally, indexing schemes for uplink ACK resources are provided herein to facilitate ACK allocation for systems in which both scheduled and persistent users can communicate at a common transmission time interval (TTI). | 11-06-2008 |
20080273610 | METHOD AND APPARATUS FOR RANDOM ACCESS IN AN ORTHOGONAL MULTIPLE-ACCESS COMMUNICATION SYSTEM - Techniques for accessing a wireless communication system are described. A user equipment (UE) sends a random access preamble for system access. The random access preamble may include a random identifier (ID), a channel quality indicator (CQI), etc. The UE may randomly select the random ID or may be assigned this random ID. The UE receives a random access response from a base station. The random access response may include control channel resources (e.g., CQI and PC resources), uplink resources, and/or control information (e.g., timing advance and PC correction) for the UE. The random access response may be sent in two parts using two messages. A first message may be sent on a control channel and may include identification information and possibly other information. A second message may be sent on a shared data channel and may include remaining information for the random access response. | 11-06-2008 |
20080274753 | POSITION LOCATION FOR WIRELESS COMMUNICATION SYSTEMS - The subject matter disclosed herein relates to position location in a wireless communication system, and may more particularly relate to position location for a mobile station. | 11-06-2008 |
20080279131 | UPLINK TIMING CONTROL - Systems and methodologies are described that facilitate evaluating and utilizing timing updates in a wireless communications network. A base station can transmit timing adjustment commands to mobile devices as needed as opposed to a periodic timing update where timing adjustment commands are always sent within a certain period. However, the mobile devices need to stay awake to monitor the timing adjustment message resulting in high power consumption. On the other hand with periodic update, the mobile devices can wake up to check whether there is a timing adjustment for itself and, if not, return to a sleep mode. With the proposed method, a mobile device can sleep for a period of time to check for timing adjustment commands upon waking. Thus, both the mobile power consumption and downlink signaling overhead are reduced. | 11-13-2008 |
20080279170 | METHOD AND APPARATUS FOR MULTIPLEXING CDM PILOT AND FDM DATA - Techniques for sending control information in a wireless communication system are described. In an aspect, a user equipment (UE) may send data for control information in a resource block with frequency division multiplexing (FDM) and may send pilot in the resource block with frequency-domain code division multiplexing (CDM). The UE may determine multiple groups of subcarriers to use to send data in multiple symbol periods of the resource block based on a predetermined pattern or a pseudo-random hopping pattern. Each group may include consecutive subcarriers to support localized FDM. The multiple groups may include different subcarriers to provide frequency diversity and possibly interference averaging. The UE may send modulation symbols for data (e.g., in the time domain) on the multiple groups of subcarriers in the multiple symbol periods. The UE may send a reference signal sequence for pilot on multiple subcarriers in each symbol period for pilot. | 11-13-2008 |
20080280638 | UPLINK POWER CONTROL FOR LTE - Systems and methodologies are described that facilitate employing aperiodic closed loop power control corrections in a Long Term Evolution (LTE) based wireless communication environment. An aperiodic power control command can be sent over a downlink to control and/or correct an uplink power level employed by an access terminal. Transmission of the aperiodic power control can be triggered by a measurement (e.g., received power being outside a set margin, . . . ). The aperiodic power control command can include a single-bit and/or a multi-bit correction. Further, the access terminal can alter the uplink power level employed for subsequent uplink transmissions based upon the aperiodic power control command when received. Additionally, regardless whether the aperiodic power control command is received at a given time over the downlink, the access terminal can employ periodic power control commands and an open loop power control mechanism to adjust the uplink power level. | 11-13-2008 |
20080287155 | MULTIPLEXING AND POWER CONTROL OF UPLINK CONTROL CHANNELS IN A WIRELESS COMMUNICATION SYSTEM - Techniques for transmitting control information in a wireless communication system are described. The system may support acknowledgement (ACK) channels and channel quality indicator (CQI) channels, which may have different target signal-to-noise ratios (SNRs). The ACK and CQI channels from different user equipments (UEs) may be multiplexed on the same resource block. In one design, the transmit power of a CQI channel may be set to achieve a nominal target SNR for CQI when not multiplexed with the ACK channels and may be reduced to achieve a lower target SNR when multiplexed with the ACK channels. In another design, the transmit power of an ACK channel may be set to achieve a nominal target SNR for ACK when not multiplexed with the CQI channels and may be boosted to achieve a higher target SNR when multiplexed with the CQI channels. The CQI channel may randomly hop to mitigate performance degradation. | 11-20-2008 |
20080298502 | PILOT STRUCTURES FOR ACK AND CQI IN A WIRELESS COMMUNICATION SYSTEM - Techniques for transmitting data and pilot for control information are described. In one aspect, a user equipment (UE) may spread a reference signal sequence with a first orthogonal sequence to obtain multiple pilot sequences. The UE may then send the multiple pilot sequences on multiple subcarriers in multiple symbol periods, one pilot sequence in each symbol period. The UE may modulate the reference signal sequence with control information (e.g., ACK information) to obtain a modulated sequence. The UE may spread the modulated sequence with a second orthogonal sequence to obtain multiple data sequences. The UE may then send the multiple data sequences on the multiple subcarrier in multiple symbol periods for data. In another aspect, the UE may send multiple pilot sequences on multiple subcarriers in multiple symbol periods separated by at least one symbol period, one pilot sequence in each symbol period. | 12-04-2008 |
20080305788 | PSEUDO-RANDOM SEQUENCE MAPPING IN WIRELESS COMMUNICATIONS - Systems and methodologies are described that facilitate scrambling of downlink reference signals utilizing a pseudo-random sequence (PRS) corresponding to a primary synchronization code (PSC) and secondary synchronization code (SSC) combination. Utilization of the combination allows for orthogonal sequencing to be removed from the scrambling. This can be beneficial, for example, where resources required for orthogonalizing the reference signal outweigh the benefit of utilizing the orthogonal sequences. In such scenarios, selective scrambling can be utilized such that the orthogonal sequence or instead the PSC/SSC combination can be provided to leverage advantages of both mechanisms in the given scenarios. | 12-11-2008 |
20080316977 | CHANNEL INTERLEAVING STRUCTURE FOR A WIRELESS COMMUNICATION SYSTEM - Systems and methodologies are described that facilitate employing a hybrid transmission structure in a wireless communication environment. Each transport block (e.g., MAC PDU) can be split into multiple code blocks. Moreover, each of the code blocks can be further divided into two or more code block segments. Further, code block segments from a given code block can be transmitted over a channel during disparate time slots of a subframe. Also, within a given subframe, code block segments corresponding to differing code blocks can be transmitted sequentially in time. Utilization of the foregoing can enable employment of a pipelined decoder structure at a receiver while allowing for optimization of time/frequency diversity. | 12-25-2008 |
20090010224 | CHANNEL DEPENDENT CREDIT ACCUMULATION FOR MOBILE HANDOVER - Channel dependent credit accumulation for determining a mobile handover is provided herein. In some aspects, a characteristic(s) of a source channel(s) serving a mobile device and of one or more target channels can be evaluated. Magnitudes of the evaluated characteristics can be utilized to generate handover credits associated with the target channel(s) (e.g., based on some function of a difference in the magnitudes). If a concurrent number of credits associated with a target channel equals or rises above one or more threshold levels, a mobile device can initiate a handover. As described, disparity in source and target channel quality, signal strength, etc., can be determined to increase probability of a handover based on channel degradation over one or more time intervals. | 01-08-2009 |
20090011767 | CONSTRAINED HOPPING OF DL REFERENCE SIGNALS - Systems and methodologies are described that facilitate employing constrained frequency hopping of downlink reference signals. Constrained frequency hopping of reference signals provides a sufficiently large set of frequency hopping patterns while enhancing channel estimation. Respective subsets of resource elements can be selected to carry reference signals from a plurality of antennas for a first subframe of a sequence. Further, respective subsets of resource elements used to carry reference signals from the plurality of antennas for a second subframe can be constrained based upon the respective subsets for the first subframe. Moreover, the first subframe frame and the second subframe (and similarly any additional subframes in the sequence) can be transmitted. An access terminal receiving the sequence of subframes can combine reference signals sent from common antennas at common frequency locations in the plurality of subframes and perform channel estimation as a function of the combined reference signals. | 01-08-2009 |
20090016459 | USING CODEWORDS IN A WIRELESS COMMUNICATION SYSTEM - Systems, methodologies, and devices are described that can facilitate bandwidth efficient non-coherent signaling for uplink control channel transmissions. A communication device (e.g., a mobile device, base station) can be configured to utilize or generate a set of complex orthogonal codewords to facilitate transmission of control channel information using non-coherent signaling in a bandwidth efficient manner. A complex orthogonal codeword set can comprise a first subset of codewords where such codewords have a desirable cross-correlation property and another subset(s) of codewords that can include expurgated codewords, where the expurgated codewords can include discarded codewords and/or codeword pairs that produce a worst-case cross-correlation property. The codeword set and subsets are determined based at least in part on a predefined codeword criterion. A portion of the discarded codewords can be used for other purposes, such as erasure decoding, interference-level estimation, and/or multi-mode control channel operation. | 01-15-2009 |
20090022235 | CONTROL CHANNEL FORMAT INDICATOR FREQUENCY MAPPING - Systems and methodologies are described that facilitate selecting frequency for transmitting control channel format indicator (CCFI) data such to identify a related cell. In one example, the CCFI data can be transmitted in an initial portion of frequency (such as an orthogonal frequency division multiplexing (OFDM) symbol) in a time transmit interval (TTI). The CCFI data can be spread across the initial portion of frequency and be shifted to identify the transmitting cell. Additionally, the CCFI data can be scrambled to further identify the cell. The CCFI data can also be utilized to determine structure of subsequent control and/or data channels. | 01-22-2009 |
20090023448 | METHOD AND APPARATUS FOR INTER-SYSTEM HANDOVER - An inter-system handover system for a wireless communication system supports hand-down and hand-up of user equipment (UE) to different radio access technologies, including synchronous and asynchronous systems. Latency and handover connection failures are reduced by an access node (nodeB) broadcasting information about neighboring systems (targets) when the UE reception (RX) capability is both inside or outside the reception range of the target. A single RX chain is sufficient, although transitioning between a wireless wide area network (WWAN) to a wireless local area network may (WLAN) may advantageously benefit from simultaneous operation on two Rx chains. Optimized list of neighboring RAT systems (targets) are broadcast from the network, including measurement parameters and reporting instructions. Thereby, UE-driven reporting minimizes latencies. UE reports other-system searches to network only if needed for a handover. In addition, handover requests can be bundled with other-system measurement information, if necessary, for additional efficiencies. | 01-22-2009 |
20090028112 | HANDOVER MECHANISM THAT EXPLOITS UPLINK CHANNEL QUALITY OF A TARGET CELL - System(s) and method(s) are provided for handover of a mobile terminal in a wireless communication system. Handoff resolution relies on both a downlink channel quality indication between a serving base station and the mobile terminal,, and uplink channel quality indications amongst the terminal and a measurement set of target base stations. To generate UL channel quality indicators, the mobile station conveys a narrowband or broadband, sounding reference signal, and serving and target base stations measure UL and DL performance metrics (e.g., RSRP, RSSI, or RSOT). In backward handover, UL channel state information from target cells is received at the serving base station through backhaul communication, and handoff is resolved based on both UL and DL quality reports. In forward handover, the set of UL quality reports are conveyed to the mobile station to determine a target cell for handoff. | 01-29-2009 |
20090041110 | RATE MATCHING WITH MULTIPLE CODE BLOCK SIZES - Bits included in each code block of a transport block can be stored to an associated circular buffer and transmitted over a channel. Each circular buffer can vary in size in proportion to a size of the associated code block. Therefore, since in certain operating environments code blocks for a transport block can vary in size, circular buffers can vary in size as well. Accordingly, when not all data from a transport block and/or an array of circular buffers can be transmitted over the channel, each circular buffer from the array can transmit a portion of bits that is proportional to a size of the respective circular buffer (or the associated code block or encoded code block). Furthermore, the number of bits transmitted from each circular buffer can be constrained by an aggregate budget for all circular buffers and can be further constrained to be an integer multiple of a modulation order for the transport block. | 02-12-2009 |
20090042511 | HIERARCHICAL MODULATION FOR COMMUNICATION CHANNELS IN SINGLE-CARRIER FREQUENCY DIVISION MULTIPLE ACCESS - System(s) and method(s) are provided to transmit simultaneously a first and a second communication channel in a single-carrier waveform format with disparate error rate requirements. First channel and second channel are coded individually to form an alphabet for a first and second constellation. Prior to transmission, bits of information of the first and second channels are modulated with a hierarchical modulation constellation is generated through a combination of a first a second constellation; each constellation is assigned a configurable weight (e.g., a “hierarchic weight”) that is expressed in terms of a configurable energy ratio. The energy ratio determines the resilience of bits associated with the first and second channel. Bit mapping within the first and second constellation provides redundancy to mitigate error rate within each quadrant of the hierarchical constellation. Hierarchical modulation of more than two channel can be accomplished through the same principal of individual coding and constellation composition. | 02-12-2009 |
20090046570 | EIGEN-BEAMFORMING FOR WIRELESS COMMUNICATION SYSTEMS - Techniques for sending multiple-input multiple-output (MIMO) transmissions in wireless communication systems are described. In one design, a transmitter sends a first reference signal via a first link, e.g., a cell-specific reference signal via the downlink. The transmitter receives channel quality indicator (CQI) information determined by a receiver based on the first reference signal. The transmitter also receives a second reference signal from the receiver via a second link, e.g., a sounding reference signal via the uplink. The transmitter obtains at least one MIMO channel matrix for the first link based on the second reference signal. The transmitter determines at least one precoding matrix based on the at least one MIMO channel matrix, e.g., in accordance with ideal eigen-beamforming or pseudo eigen-beamforming. The transmitter then sends a data transmission to the receiver based on the at least one precoding matrix and the CQI information. | 02-19-2009 |
20090046582 | BEAMFORMING OF CONTROL INFORMATION IN A WIRELESS COMMUNICATION SYSTEM - Techniques for sending traffic data and control information in a wireless communication system are described. In one design, a transmitter (e.g., a Node B or a UE) may perform beamforming to send traffic data on M layers based on a precoding matrix, where M may be one or greater. The transmitter may also perform beamforming to send control information on up to M layers based on the same precoding matrix used for the traffic data. The transmitter may send the beamformed traffic data on a first physical channel and may send the beamformed control information on a second physical channel. The transmitter may multiplex the beamformed traffic data and the beamformed control information using time division multiplexing (TDM) or frequency division multiplexing (FDM). | 02-19-2009 |
20090046617 | METHOD AND APPARATUS FOR SENDING SCHEDULING INFORMATION FOR BROADCAST AND MULTICAST SERVICES IN A CELLULAR COMMUNICATION SYSTEM - Techniques for supporting broadcast, multicast, and unicast services in a cellular system are described. A Node B may multiplex data for broadcast and multicast services and data for unicast services on radio resources available for transmission. The Node B may periodically send scheduling information used to determine the radio resources carrying the broadcast and multicast services. In one design, the Node B may time division multiplex the data for the broadcast and multicast services and the data for the unicast services. The scheduling information may convey time unit(s) used for each broadcast or multicast service. In another design, the Node B may map the data for the broadcast and multicast services to time frequency blocks. The scheduling information may (i) convey the time frequency block(s) used for each broadcast or multicast service or (ii) point to control information conveying the time frequency block(s) used for each service. | 02-19-2009 |
20090046800 | FEEDBACK AND RATE ADAPTATION FOR MIMO TRANSMISSION IN A TIME DIVISION DUPLEXED (TDD) COMMUNICATION SYSTEM - Techniques for sending a MIMO transmission in a wireless communication system are described. In one design, a transmitter sends a first reference signal to a receiver. The receiver selects a precoding matrix based on the first reference signal and in accordance with a selection criterion. The receiver estimates noise and interference at the receiver and determines channel quality indicator (CQI) or modulation and coding scheme (MCS) information based on the precoding matrix and the estimated noise and interference. The receiver sends the CQI or MCS information and a second reference signal to the transmitter. The transmitter selects the precoding matrix based on the second reference signal and in accordance with the same selection criterion used by the receiver. The transmitter then sends a MIMO transmission to the receiver based on the CQI or MCS information obtained from the receiver and the precoding matrix selected by the transmitter. | 02-19-2009 |
20090046805 | UPLINK CONTROL CHANNEL FORMAT - Systems and methodologies are described that facilitate encoding feedback or control information into a compact payload. In particular, a rank indicator, a precoding matrix indicator and channel quality indicators are packaged into a control channel payload that fits into a single sub-frame. The payload format is determined based at least in part on an antenna configuration or channel quality indicator granularity. In addition, hybrid automatic repeat requests can be included in the payload. | 02-19-2009 |
20090049359 | CIRCULAR BUFFER BASED RATE MATCHING - Systems and methodologies are described that facilitate employing circular buffer based rate matching. Encoded block(s) that include systematic, parity 1, and parity 2 bits can be generated using turbo code. Bit type can be identified to separate bits into distinct groups. Systematic bits can be interleaved together to generate a randomized sequence of systematic bits, parity 1 bits can be interleaved together to yield a randomized sequence of parity 1 bits, and parity 2 bits can be interleaved together to output a randomized sequence of parity 2 bits. The randomized sequences of parity 1 bits and parity 2 bits can be interlaced together in an alternating manner. The randomized sequence of systematic bits can be inserted into a circular buffer, and upon inserting the entire sequence, the interlaced parity bits can be inserted into the circular buffer (e.g., until reaching capacity). Bits inserted into the circular buffer are transmitted. | 02-19-2009 |
20090054093 | ANTENNA SWITCHING AND UPLINK SOUNDING CHANNEL MEASUREMENT - Systems and methodologies are described that facilitate employing downlink precoding based on uplink sounding channel measurement and channel reciprocity in time division duplex or time division multiplex systems. In particular, mechanism are provided that enable downlink precoding in situations where user equipment antenna configuration includes an unequal number of transmit chains and receive chains. A mobile device transmits modulated sounding reference signals on each antenna during a calibration stage. The mobile device then transmits non-modulated sounding reference signals during a normal mode. A base station utilizes the modulated and non-modulated sounding reference signals to restore a downlink channel estimate employed in downlink precoding. | 02-26-2009 |
20090073922 | MULTIPLEXING AND TRANSMISSION OF TRAFFIC DATA AND CONTROL INFORMATION IN A WIRELESS COMMUNICATION SYSTEM - Techniques for transmitting traffic data and control information in a wireless communication system are described. In an aspect, traffic data and control information may be multiplexed at a coded data level. A user equipment (UE) may encode traffic data to obtain coded traffic data, encode control information to obtain coded control data, multiplex the coded traffic data and the coded control data, modulate the multiplexed data, and generate SC-FDMA symbols. In another aspect, traffic data and control information may be multiplexed at a modulation symbol level. The UE may encode and modulate traffic data to obtain data modulation symbols, encode and modulate control information to obtain control modulation symbols, multiplex the data and control modulation symbols, and generate SC-FDMA symbols. The UE may perform rate matching for traffic data to account for control information. The UE may also perform multiplexing and puncturing for different types of control information. | 03-19-2009 |
20090073929 | FREQUENCY DIVERSE TRANSMISSIONS IN A WIRELESS COMMUNICATION SYSTEM - Techniques for dynamically mapping assigned resources to physical resources are described herein. In one design, a resource assigned for communication may be mapped to a first physical resource based on a first mapping function and to a second physical resource based on a second mapping function. The assigned resource may be configurable for hopping or no hopping. The first mapping function may be a transparent function or may map consecutive input indices to non-consecutive output indices. The second mapping function may be equal to an output of the first mapping function plus an offset defined by a step size and a hop value. The hop value may be configurable for the assigned resource and may be conveyed in a resource assignment. The hop value may be set to a first value to indicate no hopping or to a second value to indicate hopping by the step size. | 03-19-2009 |
20090073955 | MULTIPLEXING OF SOUNDING SIGNALS IN ACK AND CQI CHANNELS - A resource block can include all symbols in a slot for each, generally a multiple of 12, sub-carrier in the resource block. A slot is typically | 03-19-2009 |
20090086700 | SYSTEMS AND METHODS FOR COMMUNICATING CONTROL DATA USING MULTIPLE SLOT FORMATS - Systems and methods for communicating control information in slots that use at least two different slot formats. In one embodiment, a method implemented in a wireless communication system includes providing at least two different slot formats, formatting control data in the slots of a control frame according to the at least two different slot formats, transmitting the control frame from a mobile station to a base station via a control channel, receiving the control frame, extracting data rate information from the control frame according to the at least two different slot formats, decoding the extracted control data, parsing the extracted data into separate data rate information and decoding data received via one or more data channels using the decoded control data. In one embodiment, the method is used to enable additional TFCI data corresponding to two different data channels to be transmitted on a single control channel. | 04-02-2009 |
20090110038 | ARRANGEMENT AND METHOD FOR TRANSMITTING CONTROL INFORMATION IN WIRELESS COMMUNICATION SYSTEMS - Systems and methodologies are described that facilitate arrangement and transmission of control information in a wireless communication system. As described herein, a scheduled transmission of acknowledgement (ACK) signaling and channel quality information (CQI) signaling in a common subframe can be adapted for network implementations with limited link budget wherein ACK signaling is configured for repetition over multiple subframes to ensure a desired error rate level for the ACK signaling. To these ends, various aspects described herein facilitate modification of a coding rate applied to ACK signaling to be transmitted with data based on a repetition factor of the ACK signaling. Additionally and/or alternatively, various aspects described herein facilitate dropping of CQI signaling and transmission of only ACK signaling on subframes where CQI and ACK signaling are to be transmitted substantially simultaneously and ACK transmission is configured for repetition over multiple subframes. | 04-30-2009 |
20090116573 | FREQUENCY DIVERSE CONTROL MAPPING OF CHANNEL ELEMENTS TO RESOURCE ELEMENTS - Aspects relate to a flexible interleaving scheme that provides frequency diversity to randomizes interference Frequency diversity groups can be utilized, wherein control channel elements (CCEs) gain greater frequency diversity for a given number of mini-CCEs (e.g., subset of CCEs). A frequency diversity group index is permuted according to a bit reversed scheme to facilitate control channel elements with a small number of mini-CCEs to also gain sufficient frequency diversity. | 05-07-2009 |
20090129259 | CODING AND MULTIPLEXING OF CONTROL INFORMATION IN A WIRELESS COMMUNICATION SYSTEM - Techniques for sending control information in a wireless communication system are described. In an aspect, a UE spreads control information across frequency with a DFT and across time with an orthogonal sequence to obtain output data for the control information. In one design, the UE receives codewords for N HARQ processes in N downlink subframes, determines an ACK value for each HARQ process, codes N ACK values for the N HARQ processes to obtain ACK information, generates output data for the ACK information, and sends the output data in one of M uplink subframes. In another aspect, first control information is processed based on a first coding and multiplexing scheme utilizing code division multiplexing in time and frequency domains. Second control information is processed based on a second coding and multiplexing scheme utilizing code division multiplexing in time domain and spreading in frequency domain. | 05-21-2009 |
20090129298 | EFFICIENT SYSTEM IDENTIFICATION SCHEMES FOR COMMUNICATION SYSTEMS - Systems and methodologies are described that facilitate efficiently indicating parameter(s) associated with a base station utilizing synchronization signals in a wireless communication environment. For instance, relative locations of a PSC and a SSC in a radio frame can be a function of a parameter. Further, a PSC sequence utilized to generate PSCs can be selected based upon a parameter. Moreover, inclusion or exclusion of PSCs from a radio frame can be a function of a parameter. Additionally or alternatively, pseudo random sequence mappings (e.g., to cell IDs, tone locations) can be a function of a parameter. Example parameters can be whether the base station is part of a TDD or a FDD system, whether the radio frame employs FS | 05-21-2009 |
20090131037 | FAST CELL SEARCH - Systems and methodologies are described that facilitate searches for a cell in a wireless communication environment. A mobile device can employ a searcher that can detect timing information respectively associated with PSCs and cells to determine the cell with the highest correlation. The searcher can detect SSCs, which can include detecting associated phase information, to determine the SSC with the highest correlation, CP length, and/or other information to facilitate identifying a desired cell having the strongest signal to establish communication between the mobile device and the desired cell. PSCs respectively associated with cells can have different positions in the symbol sequences, and SSCs can respectively be phase shifted at different angles to facilitate detection and identification of a cell(s), where a PSC can be utilized as a phase reference by the associated SSC. | 05-21-2009 |
20090143072 | CONTROL ARRANGEMENT AND METHOD FOR COMMUNICATING PAGING MESSAGES IN A WIRELESS COMMUNICATION SYSTEM - Systems and methods for utilizing paging group IDs and paging indicators are disclosed for PDCCH and PDSCH transmissions to mobile terminals in a mobile communication system. By use of the paging group IDs and paging indicators, various groups of mobile terminals, including subsets of those groups can be paged with reduced decoding requirements. Nesting of the grouping is exploited and packing of the PDCCH frame to accomplish efficient use is described. | 06-04-2009 |
20090168922 | METHODS AND SYSTEMS FOR PDCCH BLIND DECODING IN MOBILE COMMUNICATIONS - Various methods and systems for efficiently performing the blind decoding of downlink signals is described. Several forms of arranging possible CCE combinations are examined and investigated. Based on PDCCH size estimation/information, CCE concatenations that are most likely (of limited sets) can be arrived at. Tree-based concatenations are also devised using largest CCE ordering to align smaller CCE sizes to similar boundaries. By such ordering, the search space for all possible CCE ordering and sizes can be reduced to an efficient tree. Set mapping between possible lnposelstartCCElnposelend/REs are also described using a first set to secondary and tertiary sets. Various other ordering and sorting schemes are also detailed that enable a blind decode of a PDCCH channel to be efficiently performed. | 07-02-2009 |
20090175236 | METHOD AND APPARATUS FOR FAST LINK SETUP IN A WIRELESS COMMUNICATION SYSTEM - A method and apparatus for a communication system provide for fast link setup for a mobile station by transmitting a request message, transmitting an assignment message from the base station to the mobile station, and transmitting a notification message from the base station to a base station controller. The mobile station transmits an indication message to the base station controller indicating a successful completion of acquiring the data packet channel. The base station controller processes the indication message for message integrity and security feature. A portion of the available communication resources at the base station is allocated for an immediate response to the request message for acquiring a data packet channel. | 07-09-2009 |
20090181692 | RESOURCE ALLOCATION RANDOMIZATION - Different sequence resources can be allocated to a mobile device where the mobile device can exclusively uses the sequence resource with regard to a base station during a communication session. However, if another mobile device using another base station is assigned a matching sequence resource, then there can be interference if the mobile devices are relatively close enough together. Therefore, randomization of the sequence resources can take place—moreover, a cyclic shift result can be employed in sequence resource allocation to attempt to minimize interference. | 07-16-2009 |
20090197546 | MIMO TRANSMISSION WITH EXPLICIT AND IMPLICIT CYCLIC DELAYS - Techniques for transmitting data using a combination of explicit cyclic delay and implicit cyclic delay are described. A transmitter may perform first processing for cyclic delay diversity (or explicit cyclic delay processing) based on a first set of cyclic delay values known to a receiver. The transmitter may perform precoding based on a precoding matrix either before or after the explicit cyclic delay processing. The transmitter may perform second processing for cyclic delay diversity (or implicit cyclic delay processing) based on a second set of cyclic delay values unknown to the receiver. The transmitter may perform both explicit and implicit cyclic delay processing for data and may perform only implicit cyclic delay processing for pilot. One entity may select the first set of cyclic delay values and inform the other entity. The transmitter may autonomously select the second set of cyclic delay values without informing the receiver. | 08-06-2009 |
20090201869 | ENHANCED MULTIPLEXING SYSTEM AND TECHNIQUE FOR UPLINK CONTROL CHANNELS - A communication system incorporates a multiplexing scheme so that a base node that schedules user equipment (UE) can determine whether an ACK/NACK and/or a service request (SR) has been received when both uplink (UL) transmissions are simultaneously scheduled. Significant complexity reduction, better link efficiency, and higher multiplexing capability since the base node can interpret selective use by the UE of either the ACK/NACK or SR UL channel. Such interpretation can be extended to when multiple downlink (DL) transmission modes can be used, specifically DL single input multiple output (SIMO), DL multiple input multiple output (MIMO) with rank | 08-13-2009 |
20090221289 | DISCONTINUOUS TRANSMISSION SIGNALING OVER AN UPLINK CONTROL CHANNEL - Systems and methodologies are described that facilitate signaling and detecting discontinuous transmission (DTX) in a wireless communication environment. A DTX indicator and Channel Quality Indicator (CQI) feedback can be multiplexed within a common uplink control channel subframe and transmitted to a base station when the access terminal is operating in DTX mode for an Acknowledgement Channel. Further, when operating in non-DTX mode, the access terminal can multiplex an ACK indicator or a NAK indicator with the CQI feedback within a common uplink control channel subframe, which can thereafter be transferred to the base station. Accordingly, the base station can detect DTX operation or non-DTX operation of the access terminal. For example, reference signal symbols can carry one of the DTX indicator, the ACK indicator, or the NAK indicator. Pursuant to another example, the CQI feedback and the DTX indicator can be combined and carried jointly by non-reference signal symbols. | 09-03-2009 |
20090239562 | Method and Apparatus for Fast Link Setup in a Wireless Communication System - A method and apparatus for a communication system provide for fast link setup for a mobile station by transmitting a request message, transmitting an assignment message from the base station to the mobile station, and transmitting a notification message from the base station to a base station controller. The mobile station transmits an indication message to the base station controller indicating a successful completion of acquiring the data packet channel. The base station controller processes the indication message for message integrity and security feature. A portion of the available communication resources at the base station is allocated for an immediate response to the request message for acquiring a data packet channel. | 09-24-2009 |
20090239564 | Method and Appartus for Fast Link Setup in a Wireless Communication System - A method and apparatus for a communication system provide for fast link setup for a mobile station by transmitting a request message, transmitting an assignment message from the base station to the mobile station, and transmitting a notification message from the base station to a base station controller. The mobile station transmits an indication message to the base station controller indicating a successful completion of acquiring the data packet channel. The base station controller processes the indication message for message integrity and security feature. A portion of the available communication resources at the base station is allocated for an immediate response to the request message for acquiring a data packet channel. | 09-24-2009 |
20090274100 | UPLINK RESOURCE MANAGEMENT IN A WIRELESS COMMUNICATION SYSTEM - Management of uplink resources in a wireless communication is presented. In one embodiment, management of uplink resources comprises receiving a multi-bit acknowledge (multi-bit A/N) that is available for uplink transmission and receiving other information that is available for uplink transmission along with the multi-bit A/N. Next, it is determined whether a condition has been met. If the condition has been met, an uplink message is created comprising the multi-bit A/N but dropping the other information. If the condition has not been met, an uplink message is created which jointly codes the multi-bit A/N and the other information. The uplink message is then transmitted to a receiver. | 11-05-2009 |
20090296850 | ENCODED CONTROL CHANNEL INFORMATION INTERLEAVING - Systems and methodologies are described that facilitate interleaving encoded control channel information for transmission over an uplink channel. The encoded control channel information, for example, can include encoded Channel Quality Indicator (CQI) information, encoded Precoding Matrix Indicator (PMI) information, and/or Rank Indicator (RI) information. CQI information, PMI information, and/or RI information can be encoded at an access terminal, for instance, by applying a punctured Reed Muller block code to generate a sequence of encoded bits. The encoded bits can be interleaved to reorder the sequence utilizing one or more interleaving approaches. Examples of interleaving approaches that can be leveraged include prime number based interleaving, generalized bit reversal interleaving, column-row interleaving with column bit reversal, and/or M-sequence based interleaving. Further, the reordered sequence of encoded bits can be transmitted to a base station over an uplink channel. | 12-03-2009 |
20090304120 | WIRELESS COMMUNICATION SYSTEM WITH IMPROVED BROADCAST COVERAGE - Techniques to transmit data with cyclic delay diversity and pilot staggering are described. For cyclic delay diversity, OFDM symbols having different cyclic delay durations are generated. The cyclic delay durations for the OFDM symbols may be selected to be time varying with respect to the cyclic delay durations for OFDM symbols transmitted by a neighboring base station. An FDM pilot is generated and multiplexed on multiple sets of subbands in different symbol periods. Waveforms for a second radio technology (e.g., W-CDMA) may be generated for data to be transmitted with this radio technology. The OFDM symbols are multiplexed onto time slots used for OFDM, and the waveforms for the second radio technology are multiplexed onto time slots used for this radio technology. One or multiple modulated signals may be generated based on the multiplexed OFDM symbols and waveforms. Each modulated signal is transmitted from a respective antenna. | 12-10-2009 |
20090316675 | UPLINK PILOT MULTIPLEXING IN SINGLE USER MIMO AND SDMA FOR SINGLE CARRIER FREQUENCY DIVISION MULTIPLE ACCESS SYSTEMS - Systems and methodologies are described that facilitate adaptive uplink pilot multiplexing schemes. In various embodiments, frequency position and pilot channel bandwidth can be adaptively varied in a block over time based on the uplink channel data, such as the number of streams to be multiplexed. Thus, the provided adaptive uplink pilot multiplexing schemes provide flexible uplink pilot allocation schemes while maintaining single carrier waveform for improved transmit power efficiency and orthogonality of pilots within blocks for improve channel estimation and suppression of interference. | 12-24-2009 |
20090323666 | METHOD AND APPARATUS FOR DATA AND PILOT STRUCTURES SUPPORTING EQUALIZATION - Techniques for transmitting data in a manner to facilitate equalization at a receiver are described. Guard intervals are appended to data blocks such that each data block has a guard interval at the beginning of the data block and a guard interval at the end of the data block. Each guard interval may be discontinuous transmission (DTX), a polyphase sequence, or some other known sequence. Pilot is appended to each set of at least one data block. The data blocks, pilot, and guard intervals may be sent using various slot structures and are processed for transmission. The processing may include mapping the data blocks to at least one physical channel, channelizing the data blocks for each physical channel with a channelization code, combining all physical channels, and scrambling the combined data, pilot, and guard intervals with a scrambling code. | 12-31-2009 |
20090325585 | FLEXIBLE SIGNALING OF RESOURCES ON A CONTROL CHANNEL - Systems and methodologies are described that facilitate employing flexible signaling of resource block assignments on a control channel. Resource blocks associated with an uplink or downlink channel can be split into a plurality of groups, and group-specific signaling constraints can be utilized with each of these groups. For example, the group-specific signaling constraints can relate to minimum resource block allocation units, signaling structures (e.g., bitmap structure, contiguous allocation structure, tree-based structure, . . . ), and the like utilized for sending assignment indications that allocate resource blocks within the respective groups. Further, an access terminal can have a common understanding of the group-specific signaling constraints; thus, a received assignment indication can be deciphered by the access terminal by utilizing the group-specific signaling constraints. | 12-31-2009 |
20100027450 | Multiplexing of control and data with varying power offsets in a SC-FDMA system - Systems and methodologies are described that facilitate multiplexing of control information and data for common transmission in a localized FDM wireless communication system. Localized FDM transmission of control and data channels can be achieved by, for example, multiplexing control information with data and transmitting the control information and data using resources and transmission schemes specified for transmission of the data. To ensure the reliability of control information multiplexed with data, a power offset can be applied to the control information to provide varying protection levels for the control information based on properties of the data resources into which it is embedded in order to maintain a predetermined signal quality for the control information independent of the data resources. | 02-04-2010 |
20100027502 | Sub-band dependent resource management - A system and method for facilitating resource management in OFDM systems is provided. The system permits different and flexible resource cell metric operations levels (e.g. uplink load management, admission control, congestion control, signal handoff control) for different sub-bands. For the uplink load management, there are multiple distinct load operation points (e.g. IoT, RoT) per sub-band group instead of the same operation level across the entire available band. The sub-band groups encompass the entire band. The facilitation system also comprises a variety of transmitting protocols, command increment variable stepsize methods and robust command response methods. The system thus provides more flexible reverse link resource management and more efficient utilization of the bandwidth. | 02-04-2010 |
20100027697 | MIMO TRANSMISSION WITH LAYER PERMUTATION IN A WIRELESS COMMUNICATION SYSTEM - Techniques for supporting MIMO transmission with layer permutation are described. In one aspect, multiple codewords may be generated for transmission from multiple antennas (e.g., virtual antennas), with the number of codewords being less than the number of antennas. Each codeword may be mapped across the multiple antennas. Two codewords may be generated. For rank 3, the first codeword may be mapped to one layer (or one antenna on each subcarrier), and the second codeword may be mapped to two layers (or two antennas on each subcarrier). For rank 4, each codeword may be mapped to two layers. In another aspect, a base CQI indicative of an average signal quality may be determined. A delta CQI indicative of improvement over the average signal quality may also be determined. In yet another aspect, selection may be performed with different penalty factors for different ranks or number of codewords. | 02-04-2010 |
20100029212 | Inter-cell power control for interference management - A system and method for inter-cell power control for interference management in an OFDM system is provided. The system provides for a combination use of open loop and closed loop PSD control algorithms. The open loop control is a function of path loss from the serving cell as well as the neighboring cells. The closed loop control updates the end node transmit PSD by listening to the load indicators from the serving cell and at least one other neighboring non-serving cell which generates the highest level of interference. The system thus provides a fast and tight control with multi-cell information that allows improved inter-cell interference control. | 02-04-2010 |
20100029320 | Methods and apparatus for power allocation and/or rate selection for UL MIMO/SIMO operations with PAR considerations - A method for a wireless communication includes receiving or storing a peak to average (PAR) back off value; and applying the PAR back off value to determine the transmission power and rate for SIMO and MIMO transmissions. In one aspect, the PAR back off value is at least partially based on modulation type. In another aspect, the PAR back off value is more for higher order QAM than for QPSK. The power allocation algorithm for different UL MIMO schemes is described as follows. For MIMO without antenna permutation (e.g. per antenna rate control), different PAR back off values are considered for different data streams. For MIMO with antenna permutation or other unitary transformation such as virtual antenna mapping or precoding, the PAR back off are determined based on combined channel. The transmission data rate depends on power and also the receiver algorithms such as a MMSE receiver or MMSE-SIC receiver. | 02-04-2010 |
20100034146 | METHOD AND APPARATUS FOR SUPPORTING MULTI-USER AND SINGLE-USER MIMO IN A WIRELESS COMMUNICATION SYSTEM - Techniques for supporting distributed multiple-input multiple-output (MIMO) transmissions are described. In one design, a user equipment (UE) determines channel estimates for multiple cells and reports the channel estimates. The UE thereafter receives a data transmission sent by the multiple cells to the UE based on the channel estimates. The data transmission may include at least one data stream, and each data stream may be sent by one cell or the multiple cells to the UE. In another design, a UE determines first and second channel estimates for first and second cells, respectively, and reports the channel estimates. The UE then receives a first data transmission sent by the first cell to the UE based on the first channel estimate. The UE also receives a second data transmission sent by the second cell to another UE and steered away from the UE based on the second channel estimate. | 02-11-2010 |
20100034156 | Method and apparatus for reducing overhead based on the ACK channel - A method and apparatus for a wireless communication system, initially increases resources allocated to an ACKCH as resources allocated to a shared data channel (SDCH), such as a physical downlink shared channel (PDSCH) or a physical uplink shared channel (PUSCH), increases. The resources allocated to ACK are subsequently limited to a predetermined amount. | 02-11-2010 |
20100035600 | COORDINATED TRANSMISSIONS BETWEEN CELLS OF A BASE STATION IN A WIRELESS COMMUNICATIONS SYSTEM - Systems and methods for providing coverage to a first cell through a first antenna system and coverage to a second cell through a second antenna system. Data is also processed for transmission to a mobile device in the first cell using the first and second antenna systems. | 02-11-2010 |
20100035611 | REFERENCE SIGNAL DESIGN FOR CELL SEARCH IN AN ORTHOGONAL WIRELESS COMMUNICATION SYSTEM - Systems and methodologies are described that facilitate efficient cell acquisition in a wireless communication system. In one aspect, a reference signal for use in cell acquisition can be constructed in a bandwidth-agnostic manner such that it contains a common central portion in a predetermined frequency band that is independent of a bandwidth utilized by an associated wireless communication system. The central portion can be constructed as a two-dimensional block in time and frequency that spans a default cell search bandwidth, a predetermined bandwidth specified by synchronization codes or other signals, or another suitable bandwidth. A reference signal can then be constructed form the central portion by tiling or expanding the central portion such that it spans the entire system bandwidth. | 02-11-2010 |
20100056153 | CONTROL OF ACCESS TERMINAL OPERATION BASED ON INTERFERENCE INFORMATION - Systems and methodologies are described that facilitate distributing and utilizing interference information in a wireless communication environment. Interference information can be generated by a base station by evaluating uplink conditions, and disparate interference information can be collected from neighbor base station(s). Interference information associated with the base station and the neighbor base station(s) can be transmitted by the base station to access terminal(s). An access terminal that receives that interference information associated with the base station and the neighbor base station(s) can control an operation based at least in part upon the interference information. For example, the access terminal can adjust a transmit power, select a target serving base station for handover, and/or choose a random access channel (RACH) resource to use for random access as a function of the interference information associated with the base station and the neighbor base station(s). | 03-04-2010 |
20100074350 | CODEWORD LEVEL SCRAMBLING FOR MIMO TRANSMISSION - Techniques for performing codeword level scrambling for a MIMO transmission are described. A transmitter station may perform channel encoding for multiple data streams being sent simultaneously for a MIMO transmission. The channel encoding may include forward error correction (FEC) encoding and/or rate matching. The transmitter station may perform scrambling for the multiple data streams with different scrambling codes after the channel encoding. The transmitter station may also perform channel interleaving, symbol mapping, and spatial processing for the multiple data streams after the channel encoding. A receiver station may receive the MIMO transmission, perform descrambling for the multiple data streams with the different scrambling codes, and then perform channel decoding for the multiple data streams. The scrambling may allow the receiver station to isolate each data stream by performing the complementary descrambling and to obtain randomized interference from the remaining data stream(s), which may improve performance. | 03-25-2010 |
20100077265 | Turbo interleaver for high data rates - Techniques for supporting high decoding throughput are described. A transmitter may encode a code block of data bits with a Turbo encoder. A receiver may perform decoding for the code block with a Turbo decoder having multiple soft-input soft-output (SISO) decoders. A contention-free Turbo interleaver may be used if the code block size is larger than a threshold size. A regular Turbo interleaver may be used if the code block size is equal to or smaller than the threshold size. The contention-free Turbo interleaver reorders the data bits in the code block such that information from the multiple SISO decoders, after interleaving or deinterleaving, can be written in parallel to multiple storage units in each write cycle without encountering memory access contention. The regular Turbo interleaver can reorder the data bits in the code block in any manner without regard to contention-free memory access. | 03-25-2010 |
20100091702 | Cell search based on beacon in a wireless communication system - Techniques for transmitting beacon signals to assist user equipments (UEs) perform cell search and techniques for detecting for beacon signals are described. In an aspect, cells may be assigned beacon patterns defined based on orthogonal grouping of subcarriers. U subcarriers usable for beacon may be arranged into G orthogonal groups, with each group including S subcarriers. different beacon patterns may be defined based on the G groups of S subcarriers. In another aspect, the cells may transmit their beacon signals at configurable transmit power levels, which may be determined based on target beacon detection performance. In yet another aspect, a UE may perform overlapping DFTs in order to capture more received power when symbol timing at the UE is not aligned with symbol timing of cells being detected. In yet another aspect, the UE may perform beacon detection with maximal likelihood decoding. | 04-15-2010 |
20100091919 | Joint use of multi-carrier and single-carrier multiplexing schemes for wireless communication - A communication system that facilitates transmissions in accordance with a single-carrier (SC) multiplexing scheme, a multi carrier (MC) multiplexing scheme or a combination thereof is disclosed. Based on various factors such as attributes associated with a UE (user equipment) or availability of resources, a base station can signal to the UE an appropriate multiplexing scheme to be adopted for particular transmissions. The UE can be scheduled for transmission in a semi-static mode wherein the UE employs the transmission scheme for a particular time interval or it may change the mode dynamically for different transmissions. For transmissions from the UE comprising a plurality of data streams with dissimilar attributes, the base station implements a MIMO (multiple input multiple output) system for the UE. This facilitates a UE to dynamically switch between or simultaneously adopt the various multiplexing schemes for communications and thereby fully utilize advantages associated with the different schemes. | 04-15-2010 |
20100093363 | SUB-BAND DEPENDENT UPLINK LOAD MANAGEMENT - A system and method for inter-cell interference mitigation in FDM systems is provided. The system provides for increased efficiency with load metric data generated per subband for both serving and neighboring non-serving cells. The system robustly provides for sharing load metric date per subband through a backhaul channel as well as directly from cell to adjacent cell. Furthermore, a UE based communication system allows UE reduction of assigned load controls based on directly reading a neighboring cells' load metrics. The system thus robustly handles various cell types (e.g. synchronous or asynchronous) and a variety of UE capabilities while providing increased efficiency in managing inter-cell interference. | 04-15-2010 |
20100093386 | Random access for wireless communication - Techniques for sending messages for system access are described. In one aspect, a user equipment (UE) sends a first message with power headroom and/or buffer size information for system access. A Node B determines at least one parameter (e.g., a resource grant, power control information, etc.) based on the power headroom and/or buffer size information. The Node B sends a second message with the parameter(s). The UE sends a third message based on the parameter(s), e.g., with uplink resources indicated by the resource grant, with transmit power determined based on the power control information, etc. In another aspect, the UE sends a radio environment report in the third message. The report may be used to select a cell and/or a frequency for the UE. In yet another aspect, the second message includes power control information, and the UE sends the third message based on the power control information. | 04-15-2010 |
20100103906 | METHOD AND APPARATUS FOR CELL SEARCH IN AN ORTHOGONAL WIRELESS COMMUNICATION SYSTEM - Systems and methodologies are described that provide techniques for efficient cell search in a wireless communication system. In one aspect, a frequency reuse pattern can be generated by applying frequency shifts to reference signals transmitted from cells that provide coverage for a NodeB based on cell IDs or cell group IDs for the cells. The frequency shifts applied to reference signals can then be utilized as a basis for multiplexing reference signals from different cells using frequency division multiplexing (FDM) or a combination of FDM and other multiplexing techniques. Other adjustments to reference signals transmitted from respective cells, such as transmit power adjustments, can further be made to improve detection performance. | 04-29-2010 |
20100105406 | Inter-cell power control in the presence of fractional frequency reuse - System(s) and method(s) are provided for inter-cell power control in the presence of fractional frequency reuse in a wireless communication system. Transmission power control of a terminal ( | 04-29-2010 |
20100118839 | CONVEYING INFORMATION THROUGH PHASE OFFSET ON PSS RELATIVE TO DL-RS - Systems and methodologies are described that facilitate conveying information utilizing a constant phase offset on Primary Synchronization Signal (PSS). In general, the subject innovation can employ a fixed set of beams and phases in which a PSS and a Secondary Synchronization Signal (SSS) can be transmitted with the fixed set of beams and phases. Furthermore, the phase offset for PSS and SSS can be the same such that legacy user equipment is unaffected or aware of such transmissions. | 05-13-2010 |
20100118855 | METHOD AND APPARATUS FOR HYBRID FDM-CDM STRUCTURE FOR SINGLE CARRIER BASED CONTROL CHANNELS - A system and method for hybrid FDM (frequency division multiplexing)-CDM (code division multiplexing) structure for single carrier control channels is provided. The hybrid FDM-CDM structure maximizes frequency diversity over the entire available bandwidth such that orthogonality between signals from users in a given cell is maintained. Thus, users in the given cell can transmit over a non-contiguous set of tones. Furthermore, the hybrid FDM-CDM structure maintains orthogonality of a pilot of users in different cells based on a despreading operation in the time domain. | 05-13-2010 |
20100157791 | Multi-Carrier Incremental Redundancy For Packet Based Wireless Communications - Methods and apparatus are disclosed herein for providing incremental redundancy in a wireless communication system to aid in error recovery. One or more redundancy versions are sent on different carriers than the primary version of information to be transmitted. At the receiver end the redundancy versions may be combined using hard or soft combining techniques, including selection combining, selective soft combining or soft combining. | 06-24-2010 |
20100158176 | CHANNEL ESTIMATION FOR WIRELESS COMMUNICATION - Techniques for deriving channel estimates with different channel estimation filters are described. In one scheme, a filter selection metric is determined for a signal to be recovered, a channel estimation filter is selected based on the filter selection metric, and a channel estimate is derived with the selected channel estimation filter. In another scheme, a first channel estimate is derived with a first channel estimation filter having a first filter response, a first signal is recovered with the first channel estimate, and interference due to the first signal is estimated and removed. A second channel estimate is derived with a second channel estimation filter having a second filter response that is different from the first filter response. | 06-24-2010 |
20100178952 | METHOD AND APPARATUS FOR UPLINK RATE SELECTION IN THE PRESENCE OF MULTIPLE TRANSPORT CHANNELS IN A WIRELESS COMMUNICATION SYSTEM - Systems and methods for selecting data rates at which to transmit data over a primary uplink in the presence of one or more secondary uplink channels. One embodiment comprises a method including determining probabilities associated with numbers of attempted transmissions of data, determining the number of times pending data transmissions have been attempted, determining probabilities associated with the data transmissions, and allocating power for transmission of the data in a succeeding frame based upon the associated probabilities. In one embodiment, a highest supportable data rate for a primary uplink is initially selected. Then, power is allocated for a minimum set of channels on the primary uplink. Then, power is allocated for pending data transmissions on the secondary uplink. A maximum power level for the transceiver is then adjusted to account for the allocated power, and the highest supportable data rate for the primary uplink is recomputed. | 07-15-2010 |
20100182975 | UPLINK ACK TRANSMISSION FOR SDMA IN A WIRELESS COMMUNICATION SYSTEM - Techniques for transmitting acknowledgement (ACK) information in a wireless communication system are described. The system supports data transmission to multiple user equipments (UEs) on the same downlink resources with spatial division multiple access (SDMA). A base station sends a data transmission with multiple (M) layers to M UEs. The downlink resources used for the data transmission are associated with ACK resources used to send ACK information for the data transmission. The ACK resources may be partitioned into M portions, e.g., based on frequency division multiplexing (FDM). Each of the M layers is associated with a respective portion of the ACK resources. A recipient UE for each layer sends ACK for that layer on the associated portion of the ACK resources. For each ACK resource portion, one or more pilot symbols may be sent on one or more resource elements, and ACK symbols may be sent on remaining resource elements. | 07-22-2010 |
20100182979 | METHOD AND APPARATUS FOR PROCESSING PRIMARY AND SECONDARY SYNCHRONIZATION SIGNALS FOR WIRELESS COMMUNICATION - Techniques for facilitating cell search by user equipments (UEs) in a wireless communication system are described. In an aspect, a primary synchronization code (PSC) sequence may be generated based on a Frank sequence and a constant amplitude sequence that is repeated multiple times. In another aspect, a set of PSC sequences may be generated based on complementary sequences having good aperiodic correlation properties and efficient implementations. In one design, PSC sequences A+B and B+A may be formed based on Golay complementary sequences A and B, there “+” denotes concatenation. In yet another aspect, a set of secondary synchronization code (SSC) sequences may be generated based on a set of base sequences and different modulation symbols of a modulation scheme. Each base sequence may be modulated by each of M possible modulation symbols for the modulation scheme to obtain M different SSC sequences. | 07-22-2010 |
20100202414 | HSDPA SYSTEM WITH REDUCED INTER-USER INTERFERENCE - In a wireless network ( | 08-12-2010 |
20100222061 | METHOD AND APPARATUS FOR MITIGATING INTERFERENCE IN A WIRELESS COMMUNICATION SYSTEM - Techniques to mitigate inter-cell interference using joint time and frequency division are described. A frequency band is divided into multiple non-overlapping frequency subbands. The transmission timeline is divided into T | 09-02-2010 |
20100296591 | UNIFIED DESIGN AND CENTRALIZED SCHEDULING FOR DYNAMIC SIMO, SU-MIMO AND MU-MIMO OPERATION FOR RL TRANSMISSIONS - Systems and methods facilitate pilot signal design, power control, data rate determination, and channel assignment in the reverse link of a wireless communication system for dynamic scheduling and joint operation in SIMO, SU-MIMO, and MU-MIMO. Pilot signal is based on periodic transmissions of multiple sounding reference sequences for channel estimation. Power control is based on a reference signal at a predetermined power spectral density (PSD) level, and on an offset PSD determined and QC signaled based on an antenna that transmits the reference signal, other cell interference, and power amplifier headroom. PSD levels for SIMO/MIMO data transmissions are determined based on channel estimates and the predetermined PSD and offset PSD. Such data PSD levels are employed to generate data rates, and to dynamically schedule data streams for communication. Communication resources are conveyed through a channel assignment with an overhead that depends on the maximum multiplexing order of the estimated channel. | 11-25-2010 |
20100309877 | RANDOM ACCESS SIGNALING TRANSMISSION FOR SYSTEM ACCESS IN WIRELESS COMMUNICATION - Techniques for transmitting random access signaling for system access are described. In an aspect, random access signaling may be sent based on at least one transmission parameter having different values for different user equipment (UE) classes. At least one parameter value may be determined based on a particular UE class, and the random access signaling may be sent based on the determined parameter value(s). The random access signaling may be a random access preamble, and the at least one transmission parameter may include a target SNR, a backoff time, and/or a power ramp. The random access preamble may then be sent based on a target SNR value, a power ramp value, and/or a backoff time value for the particular UE class. In another aspect, a message for system access may be sent based on a power control correction received in a random access response for the random access preamble. | 12-09-2010 |
20100310027 | METHOD AND SYSTEM FOR CHANNEL EQUALIZATION - One embodiment includes a method of receiving a transmitted signal. The method comprises receiving a signal transmitted over a channel. The signal comprises a known signal and an information signal. The method further includes determining at least one indicator of channel characteristics based at least in part on the portion of the known signal. The method further includes generating a first value indicative of the information signal based at least in part on the at least one indicator of the channel characteristics. The first value comprises an error signal. The method further comprises removing the error signal from the first estimate of the signal based at least in part on the portion of the known signal. Other embodiments include systems for performing the method and methods of making such systems. | 12-09-2010 |
20100316040 | SPECTRAL SHAPING TO REDUCE PEAK-TO-AVERAGE RATIO IN WIRELESS COMMUNICATION - Techniques for performing spectral shaping to achieve a desired peak-to-average ratio (PAR) are described. Spectral shaping may be selectively performed for a single-carrier frequency division multiplexing (SC-FDM) signal based on one or more criteria, e.g., in transmit power limited conditions and/or if a modulation scheme with lower PAR is unavailable. At least one parameter of a window function or spectral shaping filter may also be adjusted based on at least one characteristic of the SC-FDM signal. For example, the roll-off of the spectral shaping filter may be adjusted based on the modulation scheme and/or the number of subcarriers used for the SC-FDM signal. A transmitter may perform spectral shaping on modulation symbols, if enabled, to obtain spectrally shaped symbols. Spectral shaping may be performed in the frequency domain either within an allocated bandwidth or with bandwidth expansion. The SC-FDM signal may be generated based on the spectrally shaped symbols. | 12-16-2010 |
20100322177 | WIRELESS COMMUNICATION HAVING REDUCED FEEDBACK DELAY - Providing for improved error control signaling in wireless communications is disclosed herein. By way of example, multiple transmissions can be conducted for a HARQ process prior to a scheduled feedback signal on the HARQ process, causing a receiving device to combine the multiple transmissions, rather than treat them as separate transmissions. In this manner, multiple transmissions can be employed to increase overall receive energy, without violating maximum transmit power constraints in a wireless communication. Further, these multiple transmissions can be configured based on prevailing signal strength at the receiving device, or based on processing capabilities of the receiving device, providing flexible protocols that can accommodate advanced as well as legacy UEs in wide range of wireless conditions. | 12-23-2010 |
20100322350 | TRANSMIT SPATIAL DIVERSITY FOR CELLULAR SINGLE FREQUENCY NETWORKS - Multiple-In Multiple-Out (MIMO) techniques are used to increase spectral efficiency of a cellular single frequency network. In some embodiments with single transmit antenna per cell, multiple data streams are transmitted from multiple cells, one data stream per set of transmit antennae. The mapping of streams to antenna sets is permuted in time. In this way, user equipment devices (UEs) at cell edges benefit from MIMO, and UEs near cell centers benefit from high carrier-to-interference (C/I) ratio of the signal. In some embodiments, each stream is concurrently transmitted on base layer of a hierarchically modulated signal from one set, and on enhancement layer of a hierarchically modulated signal from another set. The mapping of sets to streams is permuted in time. The UEs at cell edges benefit from MIMO, and the UEs near cell centers benefit from the high C/I to decode both streams from the base and enhancement layers. | 12-23-2010 |
20110002430 | SYNCHRONIZATION TRANSMISSIONS IN A WIRELESS COMMUNICATION SYSTEM - To support cell search, multiple (e.g., two) synchronization transmissions are sent in a frame with non-uniform spacing. Information is conveyed via the non-equal distances between consecutive synchronization transmissions. Multiple levels of non-uniform spacing may be used to convey different types of information. In one design, the multiple synchronization transmissions are sent in different subframes of a frame, and each synchronization transmission is sent in one of multiple symbol periods in a respective subframe. The synchronization transmissions may be sent in non-evenly spaced subframes to convey frame boundary. One synchronization transmission may be sent in one of multiple possible symbol periods depending on the information, e.g., a particular group of cell IDs, being conveyed. The distances between synchronization transmissions may also be used to convey cyclic prefix length. A secondary synchronization transmission carrying a cell ID may be sent at a predetermined offset from one of the multiple synchronization transmissions. | 01-06-2011 |
20110007653 | APPARATUS AND METHOD FOR RECEIVING PACKET DATA ON A SUBSET OF CARRIER FREQUENCIES IN A WIRELESS COMMUNICATION SYSTEM - A remote station for a wireless communication system including a base station is disclosed. The remote station includes a front end structure configured to receive packet data in parallel on a subset of carrier frequencies. Each packet data is preceded by a header field for identifying the remote station as the recipient of the packet data and the subset of carrier frequencies is based on a set of a corresponding number of multiple carrier frequencies. | 01-13-2011 |
20110013560 | BROADCAST SIGNALING L1 OVERLOAD INDICATION - Devices and methods are provided for implementing an over-the-air (OTA) broadcast of an overload indication to reduce interference levels at neighboring node(s). In one embodiment, the method involves receiving the OTA broadcast of the overload indication from a neighboring node. The method further involves performing transmit power control based upon the received overload indication to reduce Interference over Thermal (IoT) noise at the neighboring node (e.g., by adjusting the transmit power spectral density). Such a method may be performed, for example, by an access terminal or a small base node. | 01-20-2011 |
20110013686 | SYSTEMS AND METHODS FOR IMPROVING CHANNEL ESTIMATION - A method for improving channel estimation in a wireless communication system is disclosed. A wireless signal that includes a plurality of multipath components is received. N channel estimates are then obtained, where N is any positive integer greater than one. Each channel estimate of the N channel estimates corresponds to a different multipath component of the plurality of multipath components. The effects of interference between the plurality of multipath components on the N channel estimates is then reduced. | 01-20-2011 |
20110014940 | USER EQUIPMENT AND BASE STATION BEHAVIOR IN RESPONSE TO AN OVERLOAD INDICATOR - Systems and methodologies are described that facilitate responding to overload indicators in a wireless communication environment. A non-serving base station can send an over-the-air (OTA) overload indicator (OI) and a backhaul OI. A UE can receive the OTA OI from the non-serving base station, generate a report based upon the OTA OI, and send the report to a serving base station. The serving base station can receive the report from the UE, and generate a power control command for the UE based at least in part upon the report. Moreover, the serving base station can generate the power control command for the UE further based upon the backhaul OI received from the non-serving base station. For example, the UE can be configured to ignore the OTA OI. By way of another example, the serving base station can cause the non-serving base station to inhibit sending the backhaul OI. | 01-20-2011 |
20110026421 | ADAPTIVE TRANSMISSIONS IN COORDINATED MULTIPLE POINT COMMUNICATIONS - Systems and methodologies are described that facilitate adaptively communicating data to wireless devices. An access point can precode a dedicated reference signal (DRS) for transmitting to a wireless device, and the wireless device can receive the precoded DRS. The wireless device can determine the precoder by estimating a channel of the DRS and can provide channel condition feedback to the access point. The access point can create data signals including a single or a burst of data transmissions according to the feedback and can precode the data signals using the same precoder. The wireless device can additionally decode the data signals using the precoder. Moreover, the access point can cycle through precoders according to a patterned, random, pseudo-random, and/or similar sequence. | 02-03-2011 |
20110026462 | Method and Apparatus For Packer Communications in Wireless Systems - Techniques for transmitting and receiving data in an efficient manner to potentially improve capacity for a wireless network and achieve power savings for a wireless device are described. The techniques utilize a Continuous Packet Connectivity (CPC) mode comprised of multiple (e.g., two) discontinuous transmission (DTX) modes and at least one (e.g., one) discontinuous reception (DRX) mode. Each DTX mode is associated with different enabled uplink subframes usable for transmission from the wireless device to the network. Each DRX mode is associated with different enabled downlink subframes usable by the network for transmission to the wireless device. The wireless device may send signaling and/or data on the enabled uplink subframes and may receive signaling and/or data on the enabled downlink subframes. The wireless device may power down during non-enabled subframes to conserve battery power. Mechanisms to quickly transition between the DTX and DRX modes are described. | 02-03-2011 |
20110026473 | DETERMINING CONTROL REGION PARAMETERS FOR MULTIPLE TRANSMISSION POINTS - Systems and methodologies are described that facilitate determining control region parameters related to a plurality of carriers and/or coordinated multiple point (CoMP) access points. Wireless devices can receive control region parameters related to the carriers or CoMP access points from a serving access point over control channel resources. Additionally or alternatively, wireless devices can assume all carriers or CoMP access points have substantially the same control region as indicated in a control format indicator channel from the serving access point or based on a configured value. | 02-03-2011 |
20110026653 | CHANNEL ESTIMATION FOR WIRELESS COMMUNICATION - Techniques for deriving channel estimates with different channel estimation filters are described. In one scheme, a filter selection metric is determined for a signal to be recovered, a channel estimation filter is selected based on the filter selection metric, and a channel estimate is derived with the selected channel estimation filter. In another scheme, a first channel estimate is derived with a first channel estimation filter having a first filter response, a first signal is recovered with the first channel estimate, and interference due to the first signal is estimated and removed. A second channel estimate is derived with a second channel estimation filter having a second filter response that is different from the first filter response. | 02-03-2011 |
20110032838 | MITIGATION OF CRS MISALIGNMENT IN COORDINATED MULTIPOINT COMMUNICATIONS - Certain aspects of the present disclosure relate to a method for coordinated multipoint wireless communications. A technique for joint processing of misaligned reference signals in coordinated multipoint communications is provided. In one aspect, a cell may transmit an offsetting reference signal which, when processed by a receiving user equipment, at least partially cancels a first reference signal transmitted by the cell. | 02-10-2011 |
20110038329 | EFFICIENT CONTROL CHANNEL DECODING IN CoMP COMMUNICATIONS - Certain embodiments of the present disclosure propose two efficient designs for a control channel in a Coordinated Multi-Point (CoMP) system. The proposed designs enable a user equipment (UE) to transmit acknowledgement (ACK) and negative acknowledgement (NACK) signals to one or more access points (APs) upon receiving transmissions from them. | 02-17-2011 |
20110038330 | ROBUST DECODING OF CoMP TRANSMISSIONS - Techniques for transmitting data and resource signals (RS) are provided. According to certain aspects, an access point may determine RS resource locations related to one or more access points in a CoMP set transmitting a common reference signal (CRS), map data transmissions initially over resources other than those related to the RS resource locations, and map remaining data transmissions over resources related to the RS resource locations. According to certain aspects, a wireless device may receive a signal from access points in a coordinated multiple point (CoMP) communication set comprising a common reference signal (CRS) superimposed over data, determine CRS locations in the signal that correspond to the CRS, and decode data from the signal based at least in part on the determined CRS locations. | 02-17-2011 |
20110039595 | SYSTEM AND METHOD FOR OVERLOAD INDICATION - Devices and methods are provided for transmit power control in a wireless communication environment. In one embodiment, the method may involve measuring an interference amount over at least one of a sub-band and a full bandwidth. The method may involve assigning a level to the measured interference amount, the level comprising one of an overloaded level and an underloaded level. The method may involve encoding the level as an overload indicator, the overload indicator being conditioned on the sub-band such that the overload indicator includes enhanced layer symbols regarding the level of the measured interference amount. The method may involve conveying the overload indicator to at least one mobile device. | 02-17-2011 |
20110044247 | MAXIMUM POWER SPECTRAL DENSITY REPORTING IN RESPONSE TO OVERLOAD INDICATIONS - Certain aspects of the present disclosure propose methods for reporting information such as a maximum power spectral density to a serving access point after receiving overload indicators from one or more neighboring access points. The reported information may be multiplexed with other information (e.g., Channel Quality Indicator (CQI), Precoding Matrix Index (PMI), rank indication (RI) or acknowledgement (ACK)/negative acknowledgment (NACK) message for downlink data channel) before transmission to the serving access point. In addition, the information may be transmitted in a medium access control (MAC) packet data unit (PDU). | 02-24-2011 |
20110053603 | SYSTEMS, APPARATUS AND METHODS FOR COMMUNICATING DOWNLINK INFORMATION - Systems and methods facilitating communication of downlink information are provided. In one embodiment, a method can include receiving a signal indicative of a base station enabling or disabling a function, wherein the function is configured to transmit information carried in control channels using selected downlink information; receiving the selected downlink information at one or more locations; and determining a resource allocation of at least one of paging information or system information or unicast data information based, at least, on the selected downlink information. The determining can be performed without decoding control channels corresponding to the selected downlink information in response to receiving a signal indicative of the function being enabled. | 03-03-2011 |
20110064037 | CROSS-SUBFRAME CONTROL CHANNEL DESIGN - Certain aspects of the disclosure relate to performing cross-subframe control channel signaling for wireless communications. A method may be provided for signaling downlink control channel resource allocations and/or physical control format indications in a subframe different from the subframe in which a downlink data transmission may be performed. In one aspect, the method may include transmitting PDCCH and/or PCFICH during a first subframe to allocate resources for a PDSCH during a second subframe and transmitting the PDSCH during the second subframe. | 03-17-2011 |
20110085502 | BLIND DECODING OF UPLINK CONTROL CHANNELS - In 3GPP LTE, the uplink ACK and CQI bits are jointly coded prior to transmission to maintain a low peak to average ratio (PAR) waveform. Further, when data needs to be transmitted, the uplink control channels are multiplexed with data prior to transmission. However, due to errors on downlink (DL) and uplink (UL) assignments, an evolved Base Node (eNB) receiver needs to employ a set of rules to decode the control channels, to minimize the number of blind decoding hypotheses. This innovation describes the rules employed by a receiver to reduce complexity and computational overhead in part by assuming that the UE is responding to grant on the download while providing for combinations in which one or more types of grants are not received. Energy detection in accordance with metrics and normalizing for differing power controls enables selecting the correct combination for decoding. | 04-14-2011 |
20110103498 | METHOD AND APPARATUS FOR CONTROL AND DATA MULTIPLEXING IN A MIMO COMMUNICATION SYSTEM - Systems and methodologies are described herein that facilitate control and data multiplexing for uplink (UL) multiple-input-multiple-output (MIMO) communication within a wireless communication system. As described herein, a device conducting uplink MIMO communication in a wireless communication system can multiplex control signaling and data across one or more of a plurality of layers (e.g., corresponding to spatial layers, codewords, etc.) associated with an uplink transmission. Techniques are described herein for selecting layers of a transmission on which to schedule control signaling and selecting offsets to apply to the control signaling scheduled on selected layers. Further, techniques are described herein for leveraging a multi-layer transmission to increase the efficiency of acknowledgement communication. In addition, techniques are described for selecting a modulation and coding scheme (MCS) to apply to control signaling that is combined with data in an uplink multi-layer transmission. | 05-05-2011 |
20110110296 | DATA AND CONTROL MULTIPLEXING IN WIRELESS COMMUNICATIONS - Systems and methodologies are described that facilitate defining a new control region over resources allocated for communicating general non-control data in a legacy network specification. The new control region can comprise multiple control channels, which can be multiplexed together and/or with general data channels. Devices can receive control data over the new control region as well as information regarding the region, such as location of the region, location of specific resources, multiplexing schemes, frequency hopping patterns, and/or the like to appropriately decode relevant control data. This allows for expanded control resources to support multicarrier assignments, large numbers of devices being addressed, special operation modes, new downlink control information (DCI) formats, and/or the like. | 05-12-2011 |
20110141901 | ROBUST UE RECEIVER - Methods, systems, apparatus and computer program products are provided to improve the reliability of data reception. In one provided embodiment, a communication signal is parsed by a communication device to identify repeat request identifiers. The device determines an inter-arrival time of two instances of the same identifier and processes the communication signal based on a comparison between the inter-arrival time and a predetermined time. This Abstract is provided for the sole purpose of complying with the Abstract requirement rules that allow a reader to quickly ascertain the disclosed subject matter. Therefore, it is to be understood that it should not be used to interpret or limit the scope or the meaning of the claims. | 06-16-2011 |
20110141971 | MECHANISMS FOR INFORMATION EXCHANGE ACROSS CELLS TO FACILITATE RECEPTION IN A HETEROGENEOUS NETWORK - A method, an apparatus, and a computer program product for wireless communication are provided in which a signal including a signal from a UE is received. System information of a neighboring eNodeB is obtained. The received signal is processed based on the system information in order to enhance the received signal with respect to the signal from the UE. | 06-16-2011 |
20110143762 | SYSTEMS, APPARATUS AND METHODS FOR PHYSICAL RANDOM ACCESS CHANNEL PROCESSING - Systems and methods for processing a physical random access channel are provided. In some embodiments, a method can include: receiving a signal indicative of a strong user and a desired user on a physical random access channel; performing at least one of a single segment frequency domain detection or a multi-segment frequency domain detection on the signal indicative of a strong user and a desired user; generating a residual signal by cancelling out the signal indicative of a strong user; and obtaining a message transmitted by a user equipment by performing at least one of the single segment frequency domain detection or multi-segment frequency domain detection on the residual signal. | 06-16-2011 |
20110158293 | NOISE AND CHANNEL ESTIMATION USING LOW SPREADING FACTORS - Noise measurements are made within a fraction of a single symbol period of a longest orthogonal code symbol. A control processor identifies an unoccupied code having a spreading factor that is less than a longest spreading factor for the system. A despreader measures symbol energy based on the unoccupied code and a noise estimator generates noise estimations based on the measured symbol energies. The subscriber station uses similar techniques in order to perform channel estimations within a period that is a fraction of a symbol period of a longest-spreading-factor code | 06-30-2011 |
20110170504 | CONTINUOUS CDM/FDM STRUCTURE FOR LTE UPLINK DATA - A method, an apparatus, and a computer program product for wireless communication are provided in which information regarding use of a CDM and FDM structure for multiplexing data on a data channel for uplink for at least one subframe is determined. In addition, the data is multiplexed using the CDM/FDM structure for the at least one subframe based on the determined information. | 07-14-2011 |
20110176498 | UPLINK CONTROL AND DATA TRANSMISSION IN A MIXED SINGLE AND MULTIPLE CARRIER NETWORK - Providing for mixed single carrier and multi-carrier uplink transmission in a wireless communication environment is described herein. By way of example, a network is provided that can identify uplink capabilities or restrictions of respective devices of a mixed population of mobile devices, and schedule single carrier or multi-carrier transmissions accordingly. In some aspects, different subsets of multi-carrier transmission can be given priority over other subsets. Based on the priority, the network can schedule/modify relative transmit powers for respective subsets, accommodate power constraints of higher level networking protocols, and optionally give priority to one or more of the distinct transmissions. In addition, priority can be given to respective subsets of the multi-carrier transmission, to ensure high quality or reliability for important transmissions. Thus, provided is an integrated network that accommodates a powerful mix of single carrier and multi-carrier services for a mixed population of mobile devices. | 07-21-2011 |
20110188460 | SYSTEMS AND METHODS FOR SENDING POWER CONTROL INFORMATION - Systems and methodologies are described that facilitate sending a power control command in a wireless communication environment. A base station can send a power control command to a UE through resource elements reserved for at least one Physical Downlink Control Channel (PDCCH). Thus, the power control command can be punctured into a control channel element (CCE) reserved for the at least one PDCCH. Further, the base station can convey an indicator that specifies the resource elements reserved for the at least one PDCCH used for sending the power control command to the UE. Moreover, the base station can use a structure similar to a conventional (e.g., Release 8, . . . ) PHICH structure for sending the power control command using the resource elements reserved for the at least one PDCCH. For example, the power control command can be spread using one or more Walsh codes assigned to the UE. | 08-04-2011 |
20110195684 | METHODS AND APPARATUS FOR INTERFERENCE DECREASE/CANCELLATION ON DOWNLINK ACQUISITION SIGNALS - A method, an apparatus, and a computer program product for receiving a signal including components from a plurality of cells, estimating a channel from the received signal using one or more channel estimation schemes, removing a component signal using the estimated channel from the received signal to generate a processed signal and detecting a residual signal in the processed signal. | 08-11-2011 |
20110200020 | CONTINUOUS MODE OPERATION FOR WIRELESS COMMUNICATIONS SYSTEMS - Certain aspects of the present disclosure propose techniques for a continuous communications mode in a wireless communications system. The technique may involve processing bundles of transmission time interval (TTI) transmissions having transmission times that are mapped to voice-over-internet-protocol (VOIP) arrival times, wherein the bundled TTI transmissions are processed without acknowledgements to indicate the bundled TTI transmissions have been successfully received. | 08-18-2011 |
20110201361 | METHOD AND APPARATUS FOR ENHANCED PAGING - Techniques for paging user equipments (UEs) in a wireless communication system are described. In one aspect, a cell sends a paging indicator to a UE, monitors for an acknowledgement from the UE, and sends a page message to the UE if an acknowledgement is received from the UE. The cell may receive channel quality information from the UE and may send the page message with link adaptation and/or HARQ to improve performance. In another aspect, a cell sends a paging indicator on a shared control channel to a UE and sends a page message on a shared data channel to the UE. The paging indicator and page message may be sent from multiple cells to the UE. Alternatively, the paging indicator may be sent from multiple cells to the UE, and the page message may be sent from a single cell to the UE. | 08-18-2011 |
20110206009 | METHOD AND APPARATUS FOR INTER-SYSTEM HANDOVER - An inter-system handover system for a wireless communication system supports hand-down and hand-up of user equipment (UE) to different radio access technologies, including synchronous and asynchronous systems. Latency and handover connection failures are reduced by an access node (nodeB) broadcasting information about neighboring systems (targets) when the UE reception (RX) capability is both inside or outside the reception range of the target. A single RX chain is sufficient, although transitioning between a wireless wide area network (WWAN) to a wireless local area network may (WLAN) may advantageously benefit from simultaneous operation on two Rx chains. Optimized list of neighboring RAT systems (targets) are broadcast from the network, including measurement parameters and reporting instructions. Thereby, UE-driven reporting minimizes latencies. UE reports other-system searches to network only if needed for a handover. In addition, handover requests can be bundled with other-system measurement information, if necessary, for additional efficiencies. | 08-25-2011 |
20110211533 | METHOD AND APPARATUS FOR MANAGEMENT OF MULTI-CARRIER COMMUNICATIONS IN A WIRELESS COMMUNICATION SYSTEM - A method and apparatus manages resources in a wireless communication system by transmitting a multi-carrier switch command message to an access terminal instructing the access terminal to switch between a diversity mode where each antenna module of a plurality antenna modules receives a single carrier signal transmitted at a single carrier frequency and a multi-carrier mode where a first antenna module of the plurality antenna modules receives a first multi-carrier signal transmitted at a first carrier frequency and a second antenna module receives a second multi-carrier signals transmitted at a second carrier frequency. | 09-01-2011 |
20110235555 | EFFICIENT RESOURCE UTILIZATION IN TDD - In a wireless communication system unused resource elements are utilized to transmit additional pilot and control signals. The additional pilot and control signals may mitigate the impact of interference. The unused resource elements may be in a downlink pilot timeslot (DwPTS) in a time division duplex system. | 09-29-2011 |
20110235601 | PHYSICAL DOWNLINK SHARED CHANNEL (PDSCH) PROTECTION - According to certain aspects, resource blocks used for physical downlink shared channel (PDSCH) transmissions may be allocated in a manner to manage interference in neighboring cells. According to certain aspects, one or more guard RBs may be utilized when transmitting PDSCH in a first cell an effort to reduce interference by transmissions in a second cell. | 09-29-2011 |
20110235602 | SUBFRAME DEPENDENT PHYSICAL UPLINK CONTROL CHANNEL (PUCCH) REGION DESIGN - According to certain aspects, resources allocated to a user equipment (UE) for physical uplink control channel (PUCCH) transmissions may be determined in a subframe-type dependent manner. As a result, PUCCH regions for different subframes may vary based on the subframe types. | 09-29-2011 |
20110243075 | METHOD AND APPARATUS FOR ACCESS PROCEDURE IN A WIRELESS COMMUNICATION SYSTEM - An enhanced random access procedure for current and future versions of user equipment communicating with base stations. A random access preamble is transmitted, wherein the random access preamble comprises release version information of a user equipment. A payload portion of a random access response is derived, and a contention resolution message is received. | 10-06-2011 |
20110249548 | EFFICIENT ZADOFF-CHU SEQUENCE GENERATION - Efficient apparatus and method for Zadoff-Chu (“Chu”) sequence generation avoids additional processing and hardware complexity of conventional quadratic generating formula followed by Discrete Fourier Transform (DFT) with a reference signal generator that produces both a Zadoff-Chu sequence and its DFT. In the wireless communication system (e.g., Long Term Evolution (LTE) system), Chu sequences are extensively used, especially in the uplink (UL). Because of the single carrier operating mode, transmitting a Chu sequence in principle involves a succession of generating that sequence, performing a DFT operation and then an IFFT operation. Assuming that the sequence length is N, the initial sequence generation requires 2N multiplications and the DFT requires more than N log 2(N) multiplications. Given the frequent processing of Chu sequences, this would represent a complexity burden. The invention makes it possible to perform the sequence generation and DFT steps without any multiplication operation, except for possibly calculating certain initial parameters. | 10-13-2011 |
20110249643 | CHANNEL STATE INFORMATION REPORTING IN A WIRELESS COMMUNICATION NETWORK - According to certain aspects, techniques for periodically reporting channel state information (CSI) on protected and unprotected resources are provided. The protected resources may include resources in which transmissions in a first cell are protected by restricting transmissions in a second cell. | 10-13-2011 |
20110250892 | METHODS AND APPARATUS FOR FACILITATING ROBUST FORWARD HANDOVER IN LONG TERM EVOLUTION (LTE) COMMUNICATION SYSTEMS - Method and apparatus for facilitating inter-cell connections, such as during a forward handover or radio link failure (RLF), are disclosed. A user terminal such as a UE may store identity information associated with a source cell, and use this information in accessing target or other cells subsequent to radio link failure so as to facilitate access to context information of the user terminal. A base station may be configured to improve handover performance by associating context information with a newly assigned terminal identity. Handover performance may be enhanced by facilitating connection processing in the event of inability to retrieve user terminal context from a source cell. | 10-13-2011 |
20110250911 | NOISE PADDING TECHNIQUES IN HETEROGENEOUS NETWORKS - A method of wireless communication includes detecting uplink interference in a received uplink transmission of a user equipment. The received uplink transmission is padded with noise based on the detected interference and also based on a frequency domain partition, whether a subframe is protected, and/or a user equipment type. | 10-13-2011 |
20110250913 | RANDOM ACCESS PROCEDURE ENHANCEMENTS FOR HETEROGENEOUS NETWORKS - Certain aspects of the present disclosure provide various mechanisms that allow a user equipment to convey information regarding one or more attributes to a base station during a random access (RA) procedure. The attributes may include, for example a capability of the UE (e.g., to support a particular feature or version of a standard) or a condition of the UE (e.g., if it is currently experiencing an interference condition). | 10-13-2011 |
20110255431 | COORDINATED SILENT PERIOD WITH SOUNDING REFERENCE SIGNAL (SRS) CONFIGURATION - A method of wireless communication includes configuring a virtual SRS (sounding reference signal) transmission to prompt a user equipment (UE) to use a shortened uplink transmission format to create a silent period at an end of a subframe. Reports are received from the UE indicating interference observed during the silent period. | 10-20-2011 |
20110268101 | TRANSMISSION AND RECEPTION OF PROXIMITY DETECTION SIGNAL FOR PEER DISCOVERY - Techniques for performing peer discovery to enable peer-to-peer (P2P) communication are disclosed. In an aspect, a proximity detection signal used for peer discovery may be generated based on one or more physical channels and/or signals used in a wireless network. In one design, a user equipment (UE) may generate a proximity detection signal occupying at least one resource block based on a SC-FDMA modulation technique. In another design, the UE may generate a proximity detection signal occupying at least one resource block based on an OFDMA modulation technique. The UE may generate SC-FDMA symbols or OFDMA symbols in different manners for different physical channels. In yet another design, the UE may generate a proximity detection signal including a primary synchronization signal and a secondary synchronization signal. For all designs, the UE may transmit the proximity detection signal to indicate its presence and to enable other UEs to detect the UE. | 11-03-2011 |
20110274060 | SUBFRAME-SPECIFIC SEARCH SPACE DESIGN FOR CROSS-SUBFRAME ASSIGNMENTS - In release 8 of the LTE standard (“Rel-8”), a control channel and its associated data channel for downlink may be found in the same subframe. However, decoding of the control channel may be difficult if there is strong interference from different cells (e.g., due to interference from strong/dominant interfering cells). Communication in a dominant interference scenario may be supported by performing inter-cell interference coordination (ICIC). For example, cells may partition subframes to avoid interference. For some embodiments, allocating resources for a downlink data channel on one subframe may come from a PDCCH on a different subframe, which can be referred to as a cross-subframe assignment. Certain aspects of the present disclosure provide subframe-specific search spaces that may be used when there is at least one cross-subframe assignment in a subframe. | 11-10-2011 |
20110280333 | DEDICATED REFERENCE SIGNAL - Systems and methodologies are described that facilitate utilizing dedicated reference signal in connection with downlink transmissions. A dedicated reference signal can comprise a set of dedicated reference symbols, which are inserted into a resource block in accordance with a specification provided by a dedicated reference signal structure. The dedicated reference signal structure can vary according to a rank utilized in the downlink transmission. | 11-17-2011 |
20110294530 | PREAMBLE BASED UPLINK POWER CONTROL FOR LTE - Systems and methodologies are described that facilitate utilizing power control preambles with closed loop power control techniques in a wireless communication environment. An uplink grant can be transferred over a downlink (e.g., a first uplink grant after uplink inactivity), and a power control preamble can be sent over an uplink in response to the uplink grant. According to an example, transmission of the power control preamble can be explicitly scheduled and/or implicitly scheduled. The power control preamble can be transmitted at a power level determined by an access terminal utilizing an open loop power control mechanism. A base station can analyze the power control preamble and generate a power control command based thereupon to correct the power level employed by the access terminal. The access terminal can thereafter utilize the power control command to adjust the power level for uplink data transmission. | 12-01-2011 |
20110299626 | FEEDBACK OF CHANNEL STATE INFORMATION FOR MIMO AND SUBBAND SCHEDULING IN A WIRELESS COMMUNICATION SYSTEM - Techniques for efficiently sending channel state information using differential encoding are described. Differential encoding may be performed across space, across frequency, across space and frequency, across space, frequency and time, or across some other combination of dimensions. In one design, spatial state information may be determined for multiple spatial channels on multiple subbands. The spatial channels may correspond to different antennas, different precoding vectors, etc. Channel quality indicator (CQI) values may be obtained for the multiple spatial channels on the multiple subbands. The CQI values may be differentially encoded across the multiple spatial channels and the multiple subbands to obtain differential CQI information. In another design, CQI values may be obtained for multiple spatial channels on the multiple subbands in multiple time intervals and may be differentially encoded across space, frequency and time. The differential CQI information and the spatial state information may be sent as feedback. | 12-08-2011 |
20110310952 | METHOD AND APPARATUS FOR BLOCK-WISE DECISION-FEEDBACK EQUALIZATION FOR WIRELESS COMMUNICATION - Techniques for performing decision feedback equalization are described. A feed-forward filter response and a feedback filter response are derived based on a channel estimate and a reliability parameter and further without constraint on the feedback filter response or with a constraint of no feedback for an on-time sample. The reliability parameter is indicative of the reliability of the feedback used for equalization and may be frequency dependent or frequency invariant. Different feed-forward and feedback filter responses may be derived with different constraints on the feedback filter and different assumptions for the reliability parameter. Equalization is performed with the feed-forward and feedback filter responses. If equalization is performed for multiple iterations then, for each iteration, the reliability parameter may be updated, the feed-forward and feedback filter responses may be derived based on the updated reliability parameter, and equalization may be performed with the filter responses for the iteration. | 12-22-2011 |
20110317586 | EVENT-TRIGGERED PEER DISCOVERY - Techniques for supporting peer-to-peer (P2P) communication are disclosed. In an aspect, a device performs peer discovery based on trigger events. In one design, the device detects an event triggering peer discovery, which may be an application becoming active on the device, a change in the position of the device, the device being turned on, etc. The device performs peer discovery based on detection of the event triggering peer discovery. In one design, the device starts peer discovery in response to detecting the trigger event. In another design, the device changes at least one characteristic (e.g., the periodicity) of peer discovery in response to detecting the trigger event. In another design, a device determines an application becoming active on the device. The device transmits a query (e.g., in a proximity detection signal) to request for a service from a peer device to support the application. | 12-29-2011 |
20120011247 | HYBRID MODES FOR PEER DISCOVERY - Techniques for performing peer discovery in a wireless network are described. A device may perform peer discovery to detect and identify other devices of interest. In an aspect, the device may perform peer discovery based on a hybrid mode that includes autonomous peer discovery and network-assisted peer discovery. In another aspect, the device may perform peer discovery based on a push mode and a pull mode. For the push mode, the device may occasionally transmit and/or receive a peer detection signal. For the pull mode, the device may transmit and/or receive a peer discovery request when triggered. In yet another aspect, the device may perform event-triggered peer discovery (e.g., for the pull mode). In yet another aspect, the device may perform peer discovery using both a downlink spectrum and an uplink spectrum. In yet another aspect, the device may transmit a peer detection signal in a manner to improve detection and/or increase payload. | 01-12-2012 |
20120020309 | BUNDLED FREQUENCY DIVISION MULTIPLEXING STRUCTURE IN WIRELESS COMMUNICATIONS - Methods and apparatuses are provided that facilitate allocating a portion of a resource block to a power-limited device for communicating therewith. The power-limited device may not be capable of transmitting over an entire resource block due to power limitations; thus, a portion of the resource block can be assigned thereto, allowing for allocating at least a different portion of the resource block to at least one different device to optimize communications over the resource block. In addition, the portion of the resource block can be allocated across one or more bundled time transmit intervals (TTI) to allow for effective communication of time-sensitive data, such as voice over internet protocol (VoIP). | 01-26-2012 |
20120020426 | TRANSMIT FORMAT SELECTION WITH CONSIDERATION FOR RESOURCE REUSE - Techniques for selecting transmit formats in a manner to account for the degrees of resource reuse for multiple data streams sent simultaneously from multiple antennas are described. The degree of resource reuse for each data stream indicates the amount of reuse of resources (e.g., orthogonal codes or subcarriers) observed by that stream. Interference estimates for the multiple data streams are derived based on an initial resource assignment. The degrees of resource reuse are determined based on the interference estimates and are used to derive at least one correction factor. At least one transmit format is then selected for the data streams using the at least one correction factor. Each data stream is associated with a transmit format that indicates the amount of resources to use for the data stream and other parameters. Resources are assigned to each data stream in accordance with its transmit format. | 01-26-2012 |
20120021753 | METHODS AND APPARATUS FOR FACILITATING INTER-CELL INTERFERENCE COORDINATION VIA OVER THE AIR LOAD INDICATOR AND RELATIVE NARROWBAND TRANSMIT POWER - Systems and methods for facilitating inter-cell interference coordination using resource partitioning are described. A UE may receive or determine information related to received interference and/or future scheduling. The information may be communicated to a serving base station, which may use the information to allocate uplink or downlink resources between cells. The uplink and/or downlink resource may be partitioned in subbands to mitigate interference from adjacent network nodes. The eNBs may communicate, such as directly, via a backhaul connection, and/or between UEs to configure interference coordination and signaling. | 01-26-2012 |
20120039183 | METHOD AND APPARATUS FOR FACILITATING SENSING IN COGNITIVE RADIO COMMUNICATIONS - Techniques are provided for the suppression of reference signal transmissions to enable sensing in cognitive radio communications. In one example, there is provided a method, operable by a network entity (e.g., evolved Node B), that may involve communicating with another network entity to determine parameters of a quiet period, the parameters comprising at least one of when the quiet period occurs and duration of the quiet period. The method may involve transmitting a reference signal in a first channel exclusively during a first plurality of subframes of a first frame period, wherein the first frame period further includes a quiet period during which no signals are transmitted, and performing during the quiet period a sensing operation with respect to the first channel. | 02-16-2012 |
20120039284 | METHOD AND APPARATUS FOR USE OF LICENSED SPECTRUM FOR CONTROL CHANNELS IN COGNITIVE RADIO COMMUNICATIONS - Techniques are provided for control signaling and channel selection in cognitive Long Term Evolution (LTE). In one example, there is provided a method, operable by a mobile entity, that involves receiving, on a licensed channel, broadcasted channel usage information regarding at least one unlicensed channel used by one or more network nodes. The method further involves: performing a cell search procedure based at least in part on the channel usage information to select a given network node among the one or more network nodes; determining at least one random access parameter to be used in establishing wireless communication with the given network node, the at least one random access parameter being associated with a characteristic of the user device and determining a preferred downlink channel. | 02-16-2012 |
20120044928 | DETERMINATION OF NETWORK SYNCHRONIZATION - User equipment (UE) associated with synchronous networks operate in a synchronous mode while UEs associated with asynchronous networks operate in an asynchronous mode. When operating in a synchronous mode, a UE can significantly improve performance of synchronization signal detection, data decoding, and tracking loop management by using the interference cancellation (IC) techniques that are not available in an asynchronous mode of operation. Obtaining synchronization indicators and determining the synchronization status of the current network by UE is disclosed. The determination may be based on the synchronization indicator, whether detected through signal detection, signal measurements, signal analysis, or the like. | 02-23-2012 |
20120069796 | MULTI-CARRIER INCREMENTAL REDUNDANCY FOR PACKET-BASED WIRELESS COMMUNICATIONS - In a particular embodiment, a method of providing redundancy for error recovery in multi-carrier wireless communications includes transmitting a primary version of information via a first carrier, transmitting a first portion of a redundancy version of the information via a second carrier, and transmitting a second portion of the redundancy version of the information via a third carrier. The primary version is encoded using a first encoding scheme and the redundancy version is encoded using a second encoding scheme. The primary version, the first portion, and the second portion are transmitted substantially simultaneously. | 03-22-2012 |
20120077539 | METHOD AND APPARATUS FOR UPLINK RATE SELECTION IN THE PRESENCE OF MULTIPLE TRANSPORT CHANNELS IN A WIRELESS COMMUNICATION SYSTEM - Systems and methods for selecting data rates at which to transmit data over a primary uplink in the presence of one or more secondary uplink channels. One embodiment comprises a method including determining probabilities associated with numbers of attempted transmissions of data, determining the number of times pending data transmissions have been attempted, determining probabilities associated with the data transmissions, and allocating power for transmission of the data in a succeeding frame based upon the associated probabilities. In one embodiment, a highest supportable data rate for a primary uplink is initially selected. Then, power is allocated for a minimum set of channels on the primary uplink. Then, power is allocated for pending data transmissions on the secondary uplink. A maximum power level for the transceiver is then adjusted to account for the allocated power, and the highest supportable data rate for the primary uplink is recomputed. | 03-29-2012 |
20120088516 | HETEROGENEOUS NETWORK (HETNET) USER EQUIPMENT (UE) RADIO RESOURCE MANAGEMENT (RRM) MEASUREMENTS - Methods and apparatus for performing radio resource management (RRM) measurements in a heterogeneous network (HetNet) are provided in an effort to prevent failure of RRM measurement procedures in a dominant interference scenario. Several alternatives are provided for determining particular resources (e.g., subframes) to use for performing the RRM measurements, wherein the particular resources are based on cooperative resource partitioning between cells of the HetNet, wherein the cells may be of different types (e.g., macro, pico, or femto cells). These alternatives include, for example: (1) intra-frequency or intra-RAT (radio access technology) alternatives, which may involve transmitting resource partitioning information (RPI) in or deriving non-serving cell RPI based on the serving cell's RPI, as well as (2) inter-frequency or inter-RAT alternatives, where the RRM measurements may be performed during a measurement gap. | 04-12-2012 |
20120093058 | MEHTOD AND APPARATUS FOR COMMUNICATION IN A SYSTEM EMPLOYING DIFFERING TRANSMISSION PROTOCOLS - A method and apparatus for communication in a system employing differing transmission protocols. It is determined whether a first time slot of one transmission protocol is adjacent to a second time slot of another transmission protocol, and if a first symbol within the first time slot is adjacent to a second symbol of the second time slot. A pilot power and/or a number of pilot sub-carriers or tones of the first symbol is increased and channel estimation is performed on the first symbol. | 04-19-2012 |
20120093095 | METHOD AND APPARATUS FOR SUPPORTING COMMUNICATIONS IN A HETEROGENEOUS NETWORK - A method, an apparatus, and a computer program product for wireless communication are provided in which an apparatus may determine broadcast channel scheduling information for one or more broadcasts of a payload by a broadcast channel associated with a first base station based on one or more broadcast channel interference coordination schemes, wherein reception of the broadcast channel associated with the first base station is interfered at least in part based on one or more transmissions from a second base station, and receive the payload based on the determined broadcast channel scheduling information. | 04-19-2012 |
20120120885 | METHOD AND APPARATUS TO FACILIATE USE OF LTE CHANNELIZATION STRUCTURES AND WAVEFORMS FOR PEER-TO-PEER COMMUNICATIONS - A method, an apparatus, and a computer program product for wireless communication are provided in which a UE is equipped to receive first peer-to-peer communications using a first network communication channelization and a waveform, and transmit second peer-to-peer communications using a second network communication channelization and the waveform. Further, the UE may be equipped to map one or more channels in the second peer-to-peer communications to one or more uplink channels and/or downlink channels in the second network communication channelization. The second network communication channelization may include an LTE uplink/downlink channelization. The waveform may include OFDM or SC-FDM. | 05-17-2012 |
20120122446 | FAST CELL SEARCH - Systems and methodologies are described that facilitate searches for a cell in a wireless communication environment. A mobile device can employ a searcher that can detect timing information respectively associated with PSCs and cells to determine the cell with the highest correlation. The searcher can detect SSCs, which can include detecting associated phase information, to determine the SSC with the highest correlation, CP length, and/or other information to facilitate identifying a desired cell having the strongest signal to establish communication between the mobile device and the desired cell. PSCs respectively associated with cells can have different positions in the symbol sequences, and SSCs can respectively be phase shifted at different angles to facilitate detection and identification of a cell(s), where a PSC can be utilized as a phase reference by the associated SSC. | 05-17-2012 |
20120184314 | DETERMINING AN UPLINK CONTROL PATH WITH BLIND DECODING - In an aspect, a method assists with blind decoding of uplink control signals on a Physical Uplink Shared Channel (PUSCH) and Physical Uplink Control Channel (PUCCH). The method assists in determining the uplink control path in the event a user equipment (UE) misses an uplink grant and blind decoding occurs. It is determined whether an uplink acknowledgement, rank indicator, and/or channel quality indicator are found on a PUSCH. If not, it is determined whether a scheduling request is expected and whether special handling for the scheduling request is indicated. Depending on those determinations, and whether any decoding attempts for uplink signals are successful, either the PUSCH or PUCCH is selected as the uplink control path. | 07-19-2012 |
20120201217 | MAPPING UPLINK ACKNOWLEDGEMENT RESOURCE BASED ON DOWNLINK CONTROL CHANNEL - Techniques for determining an uplink (UL) acknowledgment (ACK) resource based on a physical downlink control channel (PDCCH) carrying a resource allocation for a user equipment (UE) are disclosed. The mapping between the UL ACK resource and the PDCCH may be implicit, which may reduce overhead. The UL ACK resource may be associated with a time-varying cyclic shift of a base sequence used by the UE to send ACK information. The UE may send the ACK information based on the time-varying cyclic shift of the base sequence, which may randomize interference. | 08-09-2012 |
20120207067 | BACKWARD COMPATIBLE LTE SYSTEM DESIGN FOR ASYMMETRIC UPLINK/DOWNLINK SPECTRUM - A method of frequency division duplex (FDD) wireless communications asymmetrically maps between downlink and uplink spectrum blocks. Multiple downlink spectrum blocks may be mapped to an uplink spectrum block. | 08-16-2012 |
20120213130 | CARRIER AGGREGATION FOR EVOLVED MULTIMEDIA BROADCAST MULTICAST SERVICE ENHANCEMENT - Carrier aggregation to enhance Evolved Multimedia Broadcast Multicast Service (eMBMS) includes transmitting unicast signaling for a unicast service on an anchor carrier to mobile entities, transmitting eMBMS signaling on a second carrier different from the anchor carrier to the mobile entities for use with the unicast signaling, and various techniques for practical application of carrier aggregation for eMBMS enhancement. In addition, allocating subframes used for MBMS on a Single Frequency Network (MBSFN) includes allocating at least a portion of one or more subframes otherwise reserved for unicast subframes on a mixed carrier to provide an increased allocation of subframes carrying MBSFN information, transmitting MBSFN signals on the increased allocation of subframes, and more detailed aspects. | 08-23-2012 |
20120213143 | SYSTEM AND METHOD FOR SINGLE CARRIER OPTIMIZATION FOR EVOLVED MULTIMEDIA BROADCAST MULTICAST SERVICE - Techniques are provided for single carrier optimization. For example, there is provided a method that involves, in a subframe of a radio spectrum, allocating a first set of resource elements (REs) for multimedia broadcast over a single frequency network (MBSFN) transmissions, each symbol corresponding to each RE of the first set having a first cyclic prefix (CP) type. The method may involve allocating a second set of REs for unicast transmissions, each symbol corresponding to each RE of second set having a second CP type. The method may involve determining whether the first CP type and the second CP type are the same. The method may involve, in response to the first CP type and the second CP type being the same, combining the MBSFN transmissions and the unicast transmissions in the subframe according to the allocated first and second sets of REs. | 08-23-2012 |
20120213144 | SPATIAL TECHNIQUES FOR EVOLVED MULTIMEDIA BROADCAST MULTICAST SERVICE ENHANCEMENT - Transmission of eMBMS signals by at least one network entity of a wireless communications system may include coordinating transmission of eMBMS signaling with a remote access point of a wireless communications system to broadcast the eMBMS signaling from a multiple antenna matrix comprising at least one antenna of the network entity and at least one antenna of the access node. The network entity may be an access point. The access point may vary a precoding matrix applied to the eMBMS signaling to transmit from the network entity, or use alternative techniques for providing transmit diversity. Accordingly, the access point may provide transmit diversity for the eMBMS signaling transmitted from the multiple antenna matrix implemented between different cells on the wireless communication network. The access point may vary the precoding matrix to cause cyclical rotation of beam direction for the eMBMS transmissions from different cells of the network. | 08-23-2012 |
20120213173 | SYSTEM AND METHOD FOR THIRD-PARTY ASSISTED PEER-TO-PEER COMMUNICATION - Techniques are provided for third-party assisted peer-to-peer (P2P) communication. For example, there is provided a method, operable by a network entity, that may involve receiving first information from a first mobile entity, the first information comprising a first message for a second mobile entity. The method may involve receiving second information from the second mobile entity, the second information comprising a second message for the first mobile entity. The method may further involve coding third information based at least in part on the first information and the second information, and sending the third information to the first and second mobile entities. The method may also involve transmitting a control signal that includes processing information for decoding the coded third information to extract the first message or the second message. | 08-23-2012 |
20120263134 | METHODS AND SYSTEMS FOR PDCCH BLIND DECODING IN MOBILE COMMUNICATIONS - Various methods and systems for efficiently performing the blind decoding of downlink signals is described. Several forms of arranging possible CCE combinations are examined and investigated. Based on PDCCH size estimation/information, CCE concatenations that are most likely (of limited sets) can be arrived at. Tree-based concatenations are also devised using largest CCE ordering to align smaller CCE sizes to similar boundaries. By such ordering, the search space for all possible CCE ordering and sizes can be reduced to an efficient tree. Set mapping between possible lnposelstartCCElnposelend/REs are also described using a first set to secondary and tertiary sets. Various other ordering and sorting schemes are also detailed that enable a blind decode of a PDCCH channel to be efficiently performed. | 10-18-2012 |
20120263138 | METHOD AND APPARATUS FOR CONSTRAINED HOPPING OF DOWNLINK REFERENCE SIGNALS - Methods and apparatuses are provided that facilitate employing constrained frequency hopping of downlink reference signals. In an aspect, a method that facilitates evaluating reference signals received via a downlink in a wireless communication environment is disclosed which includes receiving a sequence of subframes transmitted by a base station, each of the subframes having resource elements used to carry reference signals according to a constrained cell-specific hopping pattern. The method also includes combining reference signals sent from common antennas at common frequency locations in the subframes and estimating a channel based upon an evaluation of the combined reference signals. | 10-18-2012 |
20120307787 | ARRANGEMENT AND METHOD FOR TRANSMITTING CONTROL INFORMATION IN WIRELESS COMMUNICATION SYSTEMS - Systems and methodologies are described that facilitate arrangement and transmission of control information in a wireless communication system. As described herein, a scheduled transmission of acknowledgement (ACK) signaling and channel quality information (CQI) signaling in a common subframe can be adapted for network implementations with limited link budget wherein ACK signaling is configured for repetition over multiple subframes to ensure a desired error rate level for the ACK signaling. To these ends, various aspects described herein facilitate modification of a coding rate applied to ACK signaling to be transmitted with data based on a repetition factor of the ACK signaling. Additionally and/or alternatively, various aspects described herein facilitate dropping of CQI signaling and transmission of only ACK signaling on subframes where CQI and ACK signaling are to be transmitted substantially simultaneously and ACK transmission is configured for repetition over multiple subframes. | 12-06-2012 |
20120327908 | METHODS AND APPARATUS FOR FACILITATING ROBUST FORWARD HANDOVER IN LONG TERM EVOLUTION (LTE) COMMUNICATION SYSTEMS - Method and apparatus for facilitating inter-cell connections, such as during a forward handover or radio link failure (RLF), are disclosed. A user terminal such as a UE may store identity information associated with a source cell, and use this information in accessing target or other cells subsequent to radio link failure so as to facilitate access to context information of the user terminal. A base station may be configured to improve handover performance by associating context information with a newly assigned terminal identity. Handover performance may be enhanced by facilitating connection processing in the event of inability to retrieve user terminal context from a source cell. | 12-27-2012 |
20130016630 | BEACONS FOR USER EQUIPMENT RELAYS - Certain aspects of the present disclosure provide methods and apparatus for detecting user equipment (UE) relays using beacons (whether in-band or out-of-band) or other mechanisms. One method generally includes determining an identifier indicative of a UE functioning as a relay and transmitting a broadcast signal including the identifier. Another method generally includes receiving, at a UE functioning as a relay, first broadcast signals at a first interval from an apparatus serving the UE; and transmitting second broadcast signals at a second interval, wherein the second broadcast signals are the same type as the first broadcast signals and wherein the second interval is greater than the first interval. | 01-17-2013 |
20130016649 | SYSTEM DESIGN FOR USER EQUIPMENT RELAYS - Certain aspects of the present disclosure provide methods and apparatus related to various considerations for using systems comprising user equipment (UE) relays. One method generally includes receiving, at a UE functioning as a relay, data from a first apparatus; and relaying the received data to a second apparatus, wherein the relaying does not involve interpreting or altering security features of the received data. | 01-17-2013 |
20130016701 | METHOD AND APPARATUS FOR RANDOM ACCESS IN AN ORTHOGONAL MULTIPLE-ACCESS COMMUNICATION SYSTEM - Techniques for accessing a wireless communication system are described. A user equipment (UE) sends a random access preamble for system access. The random access preamble may include a random identifier (ID), a channel quality indicator (CQI), etc. The UE may randomly select the random ID or may be assigned this random ID. The UE receives a random access response from a base station. The random access response may include control channel resources (e.g., CQI and PC resources), uplink resources, and/or control information (e.g., timing advance and PC correction) for the UE. The random access response may be sent in two parts using two messages. A first message may be sent on a control channel and may include identification information and possibly other information. A second message may be sent on a shared data channel and may include remaining information for the random access response. | 01-17-2013 |
20130021932 | SLEEP MODE FOR USER EQUIPMENT RELAYS - Certain aspects of the present disclosure provide methods and apparatus for subframe muting and/or discontinuous reception (DRX) mode related to sleep mode for user equipment (UE) relays. One method generally includes measuring, at a UE functioning as a relay (i.e., a UE relay), signals of one or more other UEs functioning as relays during one or more particular subframes and reporting the measurements of the signals to an apparatus. Another method generally includes determining, at a first UE functioning as a relay, that no UEs are being served by the first UE; based on the determination, increasing an interval between broadcast signals; and transmitting the broadcast signals according to the increased interval. | 01-24-2013 |
20130039236 | HIERARCHICAL MODULATION FOR COMMUNICATION CHANNELS IN SINGLE-CARRIER FREQUENCY DIVISION MULTIPLE ACCESS - System(s) and method(s) are provided to transmit simultaneously a first and a second communication channel in a single-carrier waveform format with disparate error rate requirements. First channel and second channel are coded individually to form an alphabet for a first and second constellation. Prior to transmission, bits of information of the first and second channels are modulated with a hierarchical modulation constellation is generated through a combination of a first a second constellation; each constellation is assigned a configurable weight (e.g., a “hierarchic weight”) that is expressed in terms of a configurable energy ratio. The energy ratio determines the resilience of bits associated with the first and second channel. Bit mapping within the first and second constellation provides redundancy to mitigate error rate within each quadrant of the hierarchical constellation. Hierarchical modulation of more than two channels can be accomplished through the same principal of individual coding and constellation composition. | 02-14-2013 |
20130039296 | METHOD AND APPARATUS FOR SUPPORTING OPERATION ON DEPENDENT CARRIERS - Techniques for supporting communication on multiple carriers are disclosed. In one design, a user equipment (UE) is configured with a base carrier and a dependent carrier linked to the base carrier. Data transmission on the dependent carrier is scheduled via a scheduling carrier, which is different from the dependent carrier. The UE receives a scheduling grant on the scheduling carrier and determines whether the scheduling grant is for the base carrier and/or the dependent carrier. The UE communicates (e.g., sends or receives data) on the base carrier and/or the dependent carrier based on the scheduling grant. The scheduling grant may be (i) a separate grant carrying scheduling information for only one carrier, (ii) a common grant carrying scheduling information for both carriers, (iii) a joint grant carrying separate scheduling information for each carrier, or (iv) a composite grant that may be a separate grant, a common grant, or a joint grant. | 02-14-2013 |
20130065610 | Position Location for Wireless Communication Systems - The subject matter disclosed herein relates to position location in a wireless communication system, and may more particularly relate to position location for a mobile station. | 03-14-2013 |
20130070724 | FREQUENCY SELECTIVE AND FREQUENCY DIVERSITY TRANSMISSIONS IN A WIRELESS COMMUNICATION SYSTEM - Techniques for efficiently supporting frequency selective scheduling (FSS) and frequency diversity scheduling (FDS) are described. In one design, a first transmission for an FSS user may be mapped to a subband selected for this user from among at least one subband in a first frequency region of the system bandwidth. The first transmission may be mapped to a fixed portion or different portions of the selected subband in different time intervals. A second transmission for an FDS user may be mapped across multiple subbands in a second frequency region of the system bandwidth. The second transmission may be mapped to different subbands or different resource blocks in the second frequency region in different time intervals. Each time interval may correspond to a symbol period, a slot, a subframe, etc. The frequency hopping may be performed based on a fixed hopping pattern or a pseudo-random hopping pattern. | 03-21-2013 |
20130072214 | SYSTEM, METHOD AND APPARATUS FOR ALLOCATING WIRELESS CHANNELS IN A MULTI-CHANNEL ACCESS POINT - Methods and apparatus provide for channel selection within a wireless network. A multi-channel wireless access point may select a channel for a wireless device requesting data or voice service based on the transmit times of each channel supported by the multi-channel wireless access point. The transmit times may be based on the physical rates of the devices assigned to each channel. The channel may also be selected based on the quality of service requested by the wireless device, the medium occupancy of each channel, or the number of wireless devices assigned to each channel. Alternatively the wireless device may select the channel for assignment based on channel statistics information provided by the multi-channel wireless access point. This information may be provided through one or more beacon signals, or supplied in response to a request for the information from a wireless device. | 03-21-2013 |
20130089048 | EXTENSION CARRIER AS A BANDWIDTH EXTENSION - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus receives extended bandwidth information indicating availability of an extended bandwidth. The extended bandwidth includes a base carrier and an extension carrier within a legacy guard band of the base carrier. The apparatus receives data on a downlink in the extension carrier based on the extended bandwidth information. | 04-11-2013 |
20130107805 | Reducing Complexity for Implementing Interference Cancellation Applied to Physical Channels of a Wireless Network | 05-02-2013 |
20130114437 | METHOD AND APPARATUS FOR INTERFERENCE CANCELLATION BY A USER EQUIPMENT USING BLIND DETECTION - In order to cancel any interference due to the second cell signal (e.g., from a non-serving cell) from a signal received at a UE, without receiving additional control information, the UE blindly estimates parameters associated with decoding the second cell signal. This may include determining a metric based on sets of symbols associated with the cell signals in order to determine parameters for the second cell signal, e.g., the transmission mode, modulation format, and/or spatial scheme of the second cell signal. The parameters for the signal may be determined based on a comparison of the metric with a threshold. When a spatial scheme and a modulation format is unknown, the blind estimation may include determining a plurality of constellations of possible transmitted modulated symbols associated with a potential spatial scheme and modulation format combination. Interference cancellation can be performed using the constellations and a corresponding probability weight. | 05-09-2013 |
20130114449 | HANDLING MISMATCH OF CONTROL SPANS BETWEEN SERVING CELL AND INTERFERING CELLS FOR CONTROL AND DATA CHANNEL INTERFERENCE CANCELLATION - The following is directed to control and data channel interference cancellation between a serving cell and interfering cell. A first symbol of a subframe is processed to determine a control span of a serving cell and a control span of an interfering cell. The interference is then cancelled based on the determined control spans. | 05-09-2013 |
20130121168 | Blindly Decoding Interfering Cell PDCCH to Acquire Interfering Cell PDSCH Transmission Information - Certain aspects of the present disclosure relate to a technique for blindly decoding interfering cell Physical Downlink Control Channel (PDCCH) to acquire interfering cell Physical Downlink Shared Channel (PDSCH) transmission information. A UE may determine, for one or more aggregation levels, sets of CCEs that potentially include the PDCCH, based on available CCEs for each aggregation level and identify a set of decoding candidates based on the determination. Once the decoding candidates are decoded, the UE may perform an error correcting procedure on decoded candidates and prune out unlikely candidates. Likely decoded candidates may be further pruned based on comparison of CRC calculated using information bits only and possible Radio Network Temporary Identifiers (RNTIs). The UE may then interpret content of the PDCCH of the interfering cell based on surviving candidates. The UE may then use the interpreted PDCCH information to determine PDSCH information. | 05-16-2013 |
20130136112 | METHOD AND APPARATUS FOR DATA AND CONTROL MULTIPLEXING - System(s) and method(s) are provided for transmitting data code symbols and control code symbols spanning disparate transmission time intervals in the uplink. Data and control symbols that overlap in time-domain within a transmission time interval are multiplexed and transmitted employing resources scheduled for data transmission, whereas data and control code symbols that are not multiplexed are transmitted in respective allocated resources. Multiplexing in conjunction with localized and distributed resource scheduling preserves the single-carrier characteristics of a single-carrier frequency division multiple access system. | 05-30-2013 |
20130142149 | METHOD AND APPARATUS FOR SENDING DATA AND CONTROL INFORMATION IN A WIRELESS COMMUNICATION SYSTEM - Techniques for sending control information in a communication system are described. In an aspect, control information may be sent in a first frequency location (e.g., a first set of subcarriers) if data is not being sent and in a second frequency location (e.g., a second set of subcarriers) if data is being sent. In another aspect, control information may be processed in accordance with a first processing scheme if data is not being sent and with a second processing scheme if data is being sent. In one design of the first scheme, a CAZAC sequence may be modulated with each modulation symbol for control information to obtain a corresponding modulated CAZAC sequence, which may be sent on the first set of subcarriers. In one design of the second scheme, modulation symbols for control information may be combined with modulation symbols for data, transformed to frequency domain, and mapped to the second set of subcarriers. | 06-06-2013 |
20130148558 | LOW POWER NODE DORMANT STATE - The state of an access link and backhaul link of a low power node may be determined and controlled after a low power node is initialized. The overhead signaling on the access link of a relay is controlled based on detecting a user equipment (UE). The connection on the backhaul link of the relay is managed in response to the overhead signaling on the access link. | 06-13-2013 |
20130176934 | LONG TERM EVOLUTON (LTE) USER EQUIPMENT RELAYS HAVING A LICENSED WIRELESS OR WIRED BACKHAUL LINK AND AN UNLICENSED ACCESS LINK - Certain aspects of the present disclosure provide methods and apparatus for employing relaying devices, such as Long Term Evolution (LTE) user equipment (UE) relays, having a licensed wireless or wired backhaul link and an unlicensed access link. One method generally includes receiving, at a first device, data from a first apparatus via a first carrier frequency in a licensed spectrum, wherein the first device comprises a relaying device, and relaying the data to a second apparatus via a second carrier frequency in an unlicensed spectrum. In this manner, wireless communication systems with relaying devices may achieve better spectral efficiency in unlicensed access links. | 07-11-2013 |
20130194948 | METHODS FOR INDICATING BACKHAUL RELAY GEOMETRY - A backhaul quality is measured. One or more subsets of cell identifiers having a mapped backhaul quality that maps to the measured backhaul quality are identified. The one or more subsets have a set of cell identifiers associated therewith. A network is queried to indicate one or more cell identifiers in the identified subset of cell identifiers available for a user equipment (UE) relay. One of the one or more indicated cell identifiers is selected. If more than one subset of cell identifiers has a mapped backhaul quality that maps to the measured backhaul quality, first and second subsets having respective first and second mapped backhaul qualities are selected and the backhaul qualities are compared relative to a backhaul quality threshold. The mapped backhaul quality that most satisfies the backhaul quality threshold is identified for the network query. | 08-01-2013 |
20130201917 | DYNAMIC INDICATION OF TRAFFIC TO PILOT (T/P) RATIOS - An method of wireless communication dynamically indicates traffic to pilot ratio (T/P) values in heterogeneous networks. Subframes are categorized into groups that do not overlap. A traffic to pilot ratio (T/P) indicator is received and the a T/P value for a group of subframes is determined based at least in part on the received T/P indicator. | 08-08-2013 |
20130223373 | METHODS AND APPARATUS FOR FACILITATING INTER-CELL INTERFERENCE COORDINATION VIA OVER THE AIR LOAD INDICATOR AND RELATIVE NARROWBAND TRANSMIT POWER - Systems and methods for facilitating inter-cell interference coordination using resource partitioning are described. A UE may receive or determine information related to received interference and/or future scheduling. The information may be communicated to a serving base station, which may use the information to allocate uplink or downlink resources between cells. The uplink and/or downlink resource may be partitioned in subbands to mitigate interference from adjacent network nodes. The eNBs may communicate, such as directly, via a backhaul connection, and/or between UEs to configure interference coordination and signaling. | 08-29-2013 |
20130229933 | HETEROGENEOUS NETWORK (HETNET) USER EQUIPMENT (UE) RADIO RESOURCE MANAGEMENT (RRM) MEASUREMENTS - Methods and apparatus for performing radio resource management (RRM) measurements in a heterogeneous network (HetNet) are provided in an effort to prevent failure of RRM measurement procedures in a dominant interference scenario. Several alternatives are provided for determining particular resources (e.g., subframes) to use for performing the RRM measurements, wherein the particular resources are based on cooperative resource partitioning between cells of the HetNet, wherein the cells may be of different types (e.g., macro, pico, or femto cells). These alternatives include, for example: (1) intra-frequency or intra-RAT (radio access technology) alternatives, which may involve transmitting resource partitioning information (RPI) in or deriving non-serving cell RPI based on the serving cell's RPI, as well as (2) inter-frequency or inter-RAT alternatives, where the RRM measurements may be performed during a measurement gap. | 09-05-2013 |
20130244678 | METHODS AND APPARATUS FOR FACILITATING INTER-CELL INTERFERENCE COORDINATION VIA OVER THE AIR LOAD INDICATOR AND RELATIVE NARROWBAND TRANSMIT POWER - Systems and methods for facilitating inter-cell interference coordination using resource partitioning are described. A UE may receive or determine information related to received interference and/or future scheduling. The information may be communicated to a serving base station, which may use the information to allocate uplink or downlink resources between cells. The uplink and/or downlink resource may be partitioned in subbands to mitigate interference from adjacent network nodes. The eNBs may communicate, such as directly, via a backhaul connection, and/or between UEs to configure interference coordination and signaling. | 09-19-2013 |
20130250895 | MULTIPLEXING AND TRANSMISSION OF TRAFFIC DATA AND CONTROL INFORMATION IN A WIRELESS COMMUNICATION SYSTEM - Techniques for transmitting traffic data and control information in a wireless communication system are described. In an aspect, traffic data and control information may be multiplexed at a coded data level. A user equipment (UE) may encode traffic data to obtain coded traffic data, encode control information to obtain coded control data, multiplex the coded traffic data and the coded control data, modulate the multiplexed data, and generate SC-FDMA symbols. In another aspect, traffic data and control information may be multiplexed at a modulation symbol level. The UE may encode and modulate traffic data to obtain data modulation symbols, encode and modulate control information to obtain control modulation symbols, multiplex the data and control modulation symbols, and generate SC-FDMA symbols. The UE may perform rate matching for traffic data to account for control information. The UE may also perform multiplexing and puncturing for different types of control information. | 09-26-2013 |
20130258935 | EXTENDING CYCLIC PREFIX LENGTH IN WIRELESS COMMUNICATION NETWORK HAVING MIXED CARRIER - A method, an apparatus, and a computer program product are provided for receiving unicast and multicast-broadcast single frequency network (MBSFN) signals from an eNB in a subframe. The apparatus receives at least one transmission in the subframe, the subframe divided into six partitions and for receiving at least one unicast symbol and a plurality of multicast-broadcast single frequency network (MBSFN) symbols, each of the at least one unicast symbol and the plurality of MBSFN symbols having an associated cyclic prefix (CP). The apparatus further receives at least one unicast signal including the at least one unicast symbol at a first partition of the subframe, and receives at least one MBSFN signal including the plurality of MBSFN symbols respectively at a second partition through sixth partition of the subframe, each MBSFN symbol having the associated CP with a length of at least 33.33 μs. | 10-03-2013 |
20130259013 | METHOD AND APPARATUS FOR PROCESSING PRIMARY AND SECONDARY SYNCHRONIZATION SIGNALS FOR WIRELESS COMMUNICATION - Techniques for facilitating cell search by user equipments (UEs) in a wireless communication system are described. In an aspect, a primary synchronization code (PSC) sequence may be generated based on a Frank sequence and a constant amplitude sequence that is repeated multiple times. In another aspect, a set of PSC sequences may be generated based on complementary sequences having good aperiodic correlation properties and efficient implementations. In one design, PSC sequences A+B and B+A may be formed based on Golay complementary sequences A and B, there “+” denotes concatenation. In yet another aspect, a set of secondary synchronization code (SSC) sequences may be generated based on a set of base sequences and different modulation symbols of a modulation scheme. Each base sequence may be modulated by each of M possible modulation symbols for the modulation scheme to obtain M different SSC sequences. | 10-03-2013 |
20130260763 | WIRELESS COMMUNICATION IN VIEW OF TIME VARYING INTERFERENCE - In wireless communication systems, a determination may be made whether to hand off a user equipment (UE) based on whether the UE encounters time varying interference, such as UE to UE interference. The time varying interference may be present only in a specific set of time/frequency resources or subframes. Measurement reporting may be restricted to time/frequency resources which do not experience the time varying interference. | 10-03-2013 |
20130272187 | COMMUNICATION IN A HETEROGENEOUS NETWORK WITH CARRIER AGGREGATION - A communication environment with carrier aggregation (CA) is disclosed in which a UE is configured for communication at a first time with a first network node via a primary component carrier (PCC) and a second network node via a secondary CC (SCC). At a second time, the UE is configured for communication with a third network node via the SCC at a second time. The UE maintains communication with the first network node via the PCC without triggering handover at the UE during the establishing communication with the third network node. | 10-17-2013 |
20130279430 | SMALL CELL ACTIVATION PROCEDURE - A method of wireless communication includes receiving activation parameters at a low power node and detecting a proximity of an active user equipment (UE) based at least in part on the activation parameters. The activation parameters are triggered from a node different from the low power node, such as an eNodeB. The low power node initiates an activation sequence after detecting the active UE. | 10-24-2013 |
20130279448 | Synchronization Transmissions in a Wireless Communication System - To support cell search, multiple (e.g., two) synchronization transmissions are sent in a frame with non-uniform spacing. Information is conveyed via the non-equal distances between consecutive synchronization transmissions. Multiple levels of non-uniform spacing may be used to convey different types of information. In one design, the multiple synchronization transmissions are sent in different subframes of a frame, and each synchronization transmission is sent in one of multiple symbol periods in a respective subframe. The synchronization transmissions may be sent in non-evenly spaced subframes to convey frame boundary. One synchronization transmission may be sent in one of multiple possible symbol periods depending on the information, e.g., a particular group of cell IDs, being conveyed. The distances between synchronization transmissions may also be used to convey cyclic prefix length. A secondary synchronization transmission carrying a cell ID may be sent at a predetermined offset from one of the multiple synchronization transmissions. | 10-24-2013 |
20130279617 | UNIFIED DESIGN AND CENTRALIZED SCHEDULING FOR DYNAMIC SIMO, SU-MIMO AND MU-MIMO OPERATION FOR RL TRANSMISSIONS - Systems and methods facilitate pilot signal design, power control, data rate determination, and channel assignment in the reverse link of a wireless communication system for dynamic scheduling and joint operation in SIMO, SU-MIMO, and MU-MIMO. Pilot signal is based on periodic transmissions of multiple sounding reference sequences for channel estimation. Power control is based on a reference signal at a predetermined power spectral density (PSD) level, and on an offset PSD determined and signaled based on an antenna that transmits the reference signal, other cell interference, and power amplifier headroom. PSD levels for SIMO/MIMO data transmissions are determined based on channel estimates and the predetermined PSD and offset PSD. Such data PSD levels are employed to generate data rates, and to dynamically schedule data streams for communication. Communication resources are conveyed through a channel assignment with an overhead that depends on the maximum multiplexing order of the estimated channel. | 10-24-2013 |
20130281076 | SMALL CELL ACTIVATION PROCEDURE - A method of wireless communication includes configuring a small cell with activation parameters. The activation parameters include a new carrier type having a reduced periodicity. The method also includes configuring a UE with time restricted measurements. The time restricted measurements correspond to the new carrier type and the reduced periodicity. The method further includes receiving small cell signal measurements from the UE and initiating an activation sequence in response to the small cell signal measurements. | 10-24-2013 |
20130286848 | METHOD AND APPARATUS FOR SIGNALING IN DENSE NETWORK OPERATIONS - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus transitions to a dormant state and transmits a very low duty cycle signal (LDCS) while in the dormant state. The apparatus may transmit an LDCS configuration to a second entity, the second entity being one of an LPN that is not in a dormant state and a macro cell. The apparatus may further monitor for a RACH messages at a predetermined RACH delay after transmitting the LDCS. The apparatus may transition to a DRX/DTX mode. The DRX/DTX mode may be matched to at least one connected UE. | 10-31-2013 |
20130286912 | METHOD AND APPARATUS FOR SIGNALING IN DENSE NETWORK OPERATIONS - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus identifies a UE relay and transmits a very low duty cycle signal (LDCS) configuration of the UE relay. The apparatus may comprise, e.g., an LPN that is not in a dormant state or a macrocell. The apparatus may receive LDCS information for the UE relay. The apparatus may determine the LDCS configuration and transmit the LDCS configuration to the UE relay. | 10-31-2013 |
20130286928 | METHOD AND APPARATUS FOR SIGNALING IN DENSE NETWORK OPERATIONS - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus receives an LDCS configuration for a UE relay from a second entity and monitors for an LDCS from the UE relay based on the received LDCS configuration. The second entity may comprise one of an LPN that is not in a dormant state and a Macro cell. The apparatus may receive LDCS configurations for a plurality of LPNs and monitor for a plurality of LPNs based on the received LDCS configurations. When the apparatus determines a need to connect to a LPN, the apparatus may select an LPN among the plurality of LPNs. | 10-31-2013 |
20130286965 | SIGNAL DESIGNS FOR DENSELY DEPLOYED NETWORK - Aspects of the present disclosure relate to techniques that may be utilized in networks with relatively dense deployments of nodes, such as remote radio heads (RRHs) and UE relays. | 10-31-2013 |
20130294317 | APPARATUS AND METHODS OF MBMS SUPPORT IN NEW CARRIER TYPE IN LTE - Methods and apparatus of supporting multi-media broadcast services in a wireless communication system include generating a carrier capable of carrying data traffic including broadcast data and unicast data, wherein the carrier comprises a carrier type that is non-backward compatible with existing carriers. Aspects of the methods and apparatus include transmitting broadcast data in at least one subframe of a plurality of subframes. Aspects also include providing control information at least for unicast data associated with the at least one subframe and transmitting the carrier. | 11-07-2013 |
20130301566 | COEXISTENCE BETWEEN LEGACY CARRIER TYPES AND NEW CARRIER TYPES - A method of wireless communication occurs in a frequency band having a first set of resources associated with a first carrier type and a second set of resources associated with a second carrier type. In one configuration, the first carrier type is a new carrier type and the second carrier type is a legacy carrier type. Legacy UEs may only receive signals from the second carrier type. However, new UEs may receive signals from both the first carrier type and the second carrier type. Therefore, to provide backward compatibility while supporting new UEs, an eNodeB may signal support of the first carrier type to a new UE while maintaining signaling with legacy UEs. Additionally, the eNodeB may restrict operations of a UE to the first set of resources or second set of resources. | 11-14-2013 |
20130301587 | BLINDLY DECODING INTERFERING CELL PDCCH TO ACQUIRE INTERFERING CELL PDSCH TRANSMISSION INFORMATION - Certain aspects of the present disclosure relate to a technique for decoding a control channel in an interfering cell. Information obtained from the decoded channel may be used to perform interference cancellation, perform noise estimation, obtain information about operation of one or more base stations, and/or to decode transmissions in a different interfering cell. | 11-14-2013 |
20130308520 | BATTERY POWER REPORTING FOR UE RELAYS - A method of wireless communication manages the reporting of battery power for UE relays. A UE capable of serving as a UE relay receives a battery status report configuration. The battery status may be based on rate of power consumption, percentage of total battery power remaining, characteristics of particular battery type, and/or allocation of battery usage. The UE may transmit a battery status report to a base station. | 11-21-2013 |
20130310037 | CARRIER AGGREGATION CAPABLE MOBILE OPERATION OVER SINGLE FREQUENCY - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus communicates with a primary serving cell via a first radio, detects a presence of a target cell, sends a first message to the primary serving cell indicating the detected presence of the target cell, receives a command from the primary serving cell to add the target cell as a secondary serving cell, and communicates with at least one of the primary serving cell or the target cell via a second radio to facilitate a handover to the target cell. The first radio and the second radio operate on a same frequency. A downlink control channel of the primary serving cell is not used to schedule a target cell downlink transmission. An uplink control channel to the primary serving cell is not used to provide an acknowledgment of the target cell downlink transmission. The uplink control channel to the primary serving cell is not used to provide channel side information for the target cell downlink transmission. | 11-21-2013 |
20130315051 | CODING AND MULTIPLEXING OF CONTROL INFORMATION IN A WIRELESS COMMUNICATION SYSTEM - Techniques for sending control information in a wireless communication system are described. In an aspect, a UE spreads control information across frequency with a DFT and across time with an orthogonal sequence to obtain output data for the control information. In one design, the UE receives codewords for N HARQ processes in N downlink subframes, determines an ACK value for each HARQ process, codes N ACK values for the N HARQ processes to obtain ACK information, generates output data for the ACK information, and sends the output data in one of M uplink subframes. In another aspect, first control information is processed based on a first coding and multiplexing scheme utilizing code division multiplexing in time and frequency domains. Second control information is processed based on a second coding and multiplexing scheme utilizing code division multiplexing in time domain and spreading in frequency domain. | 11-28-2013 |
20130322371 | AUTHORIZED SHARED ACCESS CARRIER AGGREGATION WITH SENSING - A method for managing spectrum resources by a network node in a wireless communication system may include determining an availability of a first channel of a spectrum, and assigning a second channel to a secondary carrier in response to determining that the first channel is available. In the alternative, or in addition, the method may include unassigning the second channel to the secondary carrier in response to determining that the first channel is unavailable. The spectrum may be, or include, Authorized Shared Access (ASA) spectrum. The method may be performed by one or more nodes of a network that is a secondary user of the spectrum. The channel may be deemed unavailable when in use by a primary user of the ASA spectrum. A wireless communication apparatus include a processor coupled to a memory holding instructions for execution by the processor to cause the apparatus to perform operations as described above. | 12-05-2013 |
20130336193 | NETWORK INFORMATION FOR ASSISTING USER EQUIPMENT - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus may be a UE that acquires information regarding an interfering non-serving cell and uses the information to improve decoding of serving cell signals. The method includes receiving, from a serving evolved Node B (eNB), information that includes one or more transmission characteristics of at least one non-serving cell and performing at least one of interference cancellation, demodulation, or provides an improved channel quality indicator (CQI) based on the received information. | 12-19-2013 |
20130336249 | APPARATUS AND METHODS FOR RESOURCE ELEMENT GROUP BASED TRAFFIC TO PILOT RATIO AIDED SIGNAL PROCESSING - A method, a computer program product, and an apparatus are provided. The methods and apparatus for wireless communication include receiving a transmission, the transmission including a plurality of resource element groups (REGs). Aspects of the methods and apparatus include selecting a set of REGs from the plurality of REGs, the set of REGs including at least one REG and determining a traffic to pilot ratio (TPR) for the set of REGs based on the transmission and reference signals in the transmission. Aspects of the methods and apparatus include determining whether the set of REGs includes at least one of control information or data based on the TPR and canceling at least one of control information or data from the set of REGs based on the TPR. | 12-19-2013 |
20140010131 | APPARATUS AND METHODS OF ENERGY EFFICIENT COMMUNICATION - A method of energy efficient wireless communication, including obtaining a signal pattern defining resources for use in transmitting or receiving signals with variable signal density over time, the signals including a plurality of signals defining a signal burst, configuring the resources based on the signal pattern, including aligning a discontinuous reception (DRX) period with the signal burst, and transmitting or receiving the signals, including the signal burst aligned with the DRX period, according to the signal pattern to achieve variable density signal transmission or reception over time. Additionally, a method may include obtaining a signal pattern that defines a first set of signals with a first density and a first periodicity and a second set of signals with a second density different than the first density and a second periodicity different than the first periodicity, and communicating reference signals among the plurality of communications devices based on the signal pattern. | 01-09-2014 |
20140016582 | SUBFRAME CONFIGURATION MANAGEMENT IN LTE HETNETS WITH TIME DOMAIN EICIC AND VOIP - A method, an apparatus, and a computer program product for wireless communication where a macro eNB or similar device may be configured to adjust an ABS configuration that is used for designating ABS subframes are provided to provide a VoLTE service to a UE. The ABS configuration may be adjusted by imposing one or more restrictions, such as alignment of the DRX OnDuration of a UE with some offset to the serving cell non-ABS subframes, and imposing restrictions on the ABS subframe settings at the macro eNB. The method or apparatus may initiate or terminate a wireless communication feature for a UE, and may adjust an ABS configuration based on the wireless communication feature, such that a maximum limit is set on a number of ABS subframes or a minimum limit is set on a number of non-ABS subframes based on the wireless communication feature. | 01-16-2014 |
20140036801 | INTER-UE INTERFERENCE CANCELLATION - Interference cancellation occurs for devices, where the source of the interference is another UE. The victim UE receiver identifies subframes vulnerable to potential interference from other UEs. Candidate resource blocks in the identified vulnerable subframes are listed. Interference is cancelled for edge resource blocks and valid contiguous resource blocks. | 02-06-2014 |
20140036812 | COMMUNICATING WITH AN ENHANCED NEW CARRIER TYPE - A method of wireless communication is presented for an enhanced new carrier type cell. The method includes transmitting downlink common signals and channels at a low duty cycle while in a dormant state. The method also includes transmitting downlink common signals and channels at a high duty cycle while in an active state. | 02-06-2014 |
20140038660 | PREAMBLE BASED UPLINK POWER CONTROL FOR LTE - Systems and methodologies are described that facilitate utilizing power control preambles with closed loop power control techniques in a wireless communication environment. An uplink grant can be transferred over a downlink (e.g., a first uplink grant after uplink inactivity), and a power control preamble can be sent over an uplink in response to the uplink grant. According to an example, transmission of the power control preamble can be explicitly scheduled and/or implicitly scheduled. The power control preamble can be transmitted at a power level determined by an access terminal utilizing an open loop power control mechanism. A base station can analyze the power control preamble and generate a power control command based thereupon to correct the power level employed by the access terminal. The access terminal can thereafter utilize the power control command to adjust the power level for uplink data transmission. | 02-06-2014 |
20140044093 | METHOD AND APPARATUS FOR SENDING SCHEDULING INFORMATION FOR BROADCAST AND MULTICAST SERVICES IN A CELLULAR COMMUNICATION SYSTEM - Techniques for supporting broadcast, multicast, and unicast services in a cellular system are described. A Node B may multiplex data for broadcast and multicast services and data for unicast services on radio resources available for transmission. The Node B may periodically send scheduling information used to determine the radio resources carrying the broadcast and multicast services. In one design, the Node B may time division multiplex the data for the broadcast and multicast services and the data for the unicast services. The scheduling information may convey time unit(s) used for each broadcast or multicast service. In another design, the Node B may map the data for the broadcast and multicast services to time frequency blocks. The scheduling information may (i) convey the time frequency block(s) used for each broadcast or multicast service or (ii) point to control information conveying the time frequency block(s) used for each service. | 02-13-2014 |
20140064068 | INTERACTIONS BETWEEN RAN-BASED AND LEGACY WLAN MOBILITY - Interactions between radio access network (RAN)-based and legacy wireless local area network (WLAN) mobility is described in which a multi-mode mobile device receives a management indication from a wide area wireless network (WWAN) to manage connectivity with the WLAN, such as in discovery, association, or specific traffic offload for the WLAN. The mobile device obtains a status of its internal WLAN radio and determines whether to process the management indication based on the status. Data offloading is also described in which the mobile device receives an indication from the WWAN to offload data to the WLAN associated with the mobile device. In response, the mobile device suspends application of a current offload policy, which had been received from the core network, based on the indication and transmits its data according to the indication. | 03-06-2014 |
20140071957 | COVERAGE ENHANCEMENT TECHNIQUES FOR MACHINE TYPE COMMUNICATION DEVICES IN A WIRELESS NETWORK - Certain aspects provide a method for wireless communications by a first access point, comprising determining a first schedule of intervals for the first access point to communicate with a first group of one or more wireless devices, wherein intervals of the first schedule are synchronized with wake up or transmission cycles of the first group of one or more wireless devices and communicating with the first group of one or more wireless devices according to the first schedule. | 03-13-2014 |
20140079036 | CONTROL ARRANGEMENT AND METHOD FOR COMMUNICATING PAGING MESSAGES IN A WIRELESS COMMUNICATION SYSTEM - Systems and methods for utilizing paging group IDs and paging indicators are disclosed for PDCCH and PDSCH transmissions to mobile terminals in a mobile communication system. By use of the paging group IDs and paging indicators, various groups of mobile terminals, including subsets of those groups can be paged with reduced decoding requirements. Nesting of the grouping is exploited and packing of the PDCCH frame to accomplish efficient use is described. | 03-20-2014 |
20140086078 | METHOD AND APPARATUS FOR SUPPORTING HYBRID CARRIER AGGREGATION - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus, e.g., base station, determines a plurality of component carriers configured for a user equipment (UE) served by the apparatus. The plurality of component carriers includes a primary component carrier and a secondary component carrier. The primary component carrier may be a time division duplex (TDD) carrier having a same uplink:downlink configuration as a first cell at a neighboring base station, and the secondary component carrier may be a TDD carrier having a different uplink:downlink configuration as a second cell at the neighboring base station. The apparatus exchanges data with the UE according to an effective uplink-downlink subframe partition of the configured component carriers. The effective uplink-downlink subframe partition may be time varying and the apparatus may operate to limit interference due to the different TDD configurations at the serving and neighbor cells. | 03-27-2014 |
20140098773 | METHOD AND APPARATUS FOR INTERFERENCE CANCELLATION BY A USER EQUIPMENT USING BLIND DETECTION - In order to cancel any interference due to the second signal (e.g., from a non-serving cell) from a signal received at a UE, without receiving additional control information, the UE blindly estimates parameters associated with decoding the second signal. This may include determining a metric based on sets of symbols associated with the signals in order to determine parameters for the second signal, e.g., the transmission mode, modulation format, and/or spatial scheme of the second signal. The parameters for the signal may be determined based on a comparison of the metric with a threshold. When a spatial scheme and a modulation format is unknown, the blind estimation may include determining a plurality of constellations of possible transmitted modulated symbols associated with a potential spatial scheme and modulation format combination. Interference cancellation can be performed using the constellations and a corresponding probability weight. | 04-10-2014 |
20140119320 | RANDOM ACCESS PROCEDURE ENHANCEMENTS FOR HETEROGENEOUS NETWORKS - Certain aspects of the present disclosure provide various mechanisms that allow a user equipment to convey information regarding one or more attributes to a base station during a random access (RA) procedure. The attributes may include, for example a capability of the UE (e.g., to support a particular feature or version of a standard) or a condition of the UE (e.g., if it is currently experiencing an interference condition). | 05-01-2014 |
20140120893 | METHOD AND APPARATUS FOR ENHANCED NEW CARRIER TYPE IN WIRELSS COMMUNICATION SYSTEMS - Systems and methods providing an enhanced new carrier type (eNCT) operable to adapt cells of a wireless communication network for opportunistic behavior that adapts to the geo-temporal traffic distribution are disclosed. Embodiments of eNCT operation provide for transmission of downlink common channels by cells employing eNCT techniques only when needed. Base stations implementing eNCT techniques herein may transition between two or more operational states, such as an active state wherein full base station functionality is performed and a dormant state wherein limited base station functionality is performed, based upon geo-temporal traffic distribution within the network. Thus, when a base station is not actively serving a user equipment (UE), the downlink transmission by the base station, and resulting interference, may be reduced or even eliminated. | 05-01-2014 |
20140126454 | EMBMS SUPPORT IN HETEROGENEOUS NETWORK - A method, an apparatus, and a computer program product for wireless communication at a node are provided. The apparatus receives a multicast-broadcast single frequency network (MBSFN) signal transmitted from a base station, decodes the received MBSFN signal, and retrieves at least one source symbol from the decoded MBSFN signal when the node is capable of retrieving a source symbol. The apparatus also generates at least one redundancy version of the MBSFN signal based on the retrieved at least one source symbol and transmits the at least one redundancy version of the MBSFN signal via MBSFN. Generating a redundancy version of the MBSFN signal includes applying forward error correction (FEC) on the retrieved at least one source symbol to generate at least one repair symbol. Thus, a redundancy version of the MBSFN signal includes the at least one repair symbol and a subset of the at least one source symbol. | 05-08-2014 |
20140133443 | METHOD AND APPARATUS FOR RANDOM ACCESS IN AN ORTHOGONAL MULTIPLE-ACCESS COMMUNICATION SYSTEM - Techniques for accessing a wireless communication system are described. A user equipment (UE) sends a random access preamble for system access. The random access preamble may include a random identifier (ID), a channel quality indicator (CQI), etc. The UE may randomly select the random ID or may be assigned this random ID. The UE receives a random access response from a base station. The random access response may include control channel resources (e.g., CQI and PC resources), uplink resources, and/or control information (e.g., timing advance and PC correction) for the UE. The random access response may be sent in two parts using two messages. A first message may be sent on a control channel and may include identification information and possibly other information. A second message may be sent on a shared data channel and may include remaining information for the random access response. | 05-15-2014 |
20140133478 | BEACON ASSISTED CELL SEARCH IN A WIRELESS COMMUNICATION SYSTEM - Techniques for transmitting synchronization signals to assist user equipments (UEs) perform cell searches are described. In one design, a base station for a cell may generate and transmit a primary synchronization signal and a secondary synchronization signal, which may be used by the UEs for initial cell search at power up. The base station may also generate and transmit one or more beacon signals, which may be used by the UEs for neighbor cell search to detect for neighbor cells. The number of beacon signals to transmit and the set of subcarriers usable for each beacon signal may be determined based on the system bandwidth. Each beacon signal may be mapped to one subcarrier in the set of subcarriers in each beacon symbol period. This one subcarrier may be determined based on a beacon hopping pattern or a beacon code and may be dependent on a cell identifier (ID). | 05-15-2014 |
20140135001 | Fast Cell Search - Systems and methodologies are described that facilitate searches for a cell in a wireless communication environment. A mobile device can employ a searcher that can detect timing information respectively associated with PSCs and cells to determine the cell with the highest correlation. The searcher can detect SSCs, which can include detecting associated phase information, to determine the SSC with the highest correlation, CP length, and/or other information to facilitate identifying a desired cell having the strongest signal to establish communication between the mobile device and the desired cell. PSCs respectively associated with cells can have different positions in the symbol sequences, and SSCs can respectively be phase shifted at different angles to facilitate detection and identification of a cell(s), where a PSC can be utilized as a phase reference by the associated SSC. | 05-15-2014 |
20140140306 | METHODS AND SYSTEMS FOR PDCCH BLIND DECODING IN MOBILE COMMUNICATIONS - Various methods and systems for efficiently performing the blind decoding of downlink signals is described. Several forms of arranging possible CCE combinations are examined and investigated. Based on PDCCH size estimation/information, CCE concatenations that are most likely (of of limited sets) can be arrived at. Tree-based concatenations are also devised using largest CCE ordering to align smaller CCE sizes to similar boundaries. By such ordering, the search space for all possible CCE ordering and sizes can be reduced to an efficient tree. Set mapping between possible lnposelstartCCElnposelend/REs are also described using a first set to secondary and tertiary sets. Various other ordering and sorting schemes are also detailed that enable a blind decode of a PDCCH channel to be efficiently performed. | 05-22-2014 |
20140198663 | METHODS AND APPARATUS FOR POWER EFFICIENT OPERATION OF LTE BASED MACHINE TYPE COMMUNICATIONS - Certain aspects of the present disclosure generally relate to wireless communications and, more particularly, to techniques for power efficient operation of LTE MTC. A method is provided wireless communications by a user equipment (UE). The method generally includes signaling information regarding traffic requirements for the UE to a base station (BS) for use in persistent scheduling (PS), receiving signaling from the BS indicating PS opportunities of traffic for the UE, powering on the radio components for the PS opportunities, and powering down radio components between PS opportunities when traffic is not expected. | 07-17-2014 |
20140198749 | TRANSMISSION AND PROCESSING OF HIGHER ORDER MODULATION - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus may be a UE. The UE identifies properties associated with reference signals of a received payload. The properties associated with reference signals of the received payload may include a reference signal structure and/or a traffic to pilot ratio. The UE determines a payload structure based on the identified properties. Subsequently, the UE decodes the received payload based on the determined payload structure. The UE may receive mapping information indicating a mapping between possible properties associated with reference signals and possible payload structures. The UE may determine the payload structure further based on the received mapping information. The UE may receive the mapping information through a broadcast or RRC signaling. | 07-17-2014 |
20140204851 | ENHANCED PHYSICAL BROADCAST CHANNEL FOR NEW CARRIER TYPE IN LONG TERM EVOLUTION - Aspects of the present disclosure provide techniques and apparatus for enhanced physical broadcast channel (PBCH) for new carrier type (NCT) in long term evolution (LTE). According to certain aspects, a method for wireless communications by a base station (BS) is provided. The method generally includes generating an enhanced physical broadcast channel (EPBCH) using a frequency division multiplexed (FDM) structure, wherein the EPBCH spans substantially a subframe duration and transmitting the EPBCH. | 07-24-2014 |
20140211677 | PRACH-BASED PROXIMITY DETECTION - Improvements to signaling procedures for use in physical random access channel (PRACH)-based proximity detection are disclosed. Signaling and signaling processes from a serving base station may trigger a more efficient and reliable transmission of PRACH from related user equipment (UE). At the dynamic power nodes (DPNs) monitoring for such PRACH-based proximity, features are disclosed which establish neighbor lists for more efficient management of detection and proximity activation. | 07-31-2014 |
20140211701 | COMMON REFERENCE SIGNAL PHASE DISCONTINUITY AND SEQUENCE INITIALIZATION - Methods, systems, and devices are described for supporting common reference signaling in wireless communications systems. Some configurations introduce a phase discontinuity between common reference signal (CRS) transmissions on different subframes. This may address issues that may arise when a reduced CRS periodicity is utilized. Indicators may also be transmitted from base stations to user equipment (UEs) to indicate whether phase continuity may be assumed or not. Some configurations may support CRS sequence initialization. These tools and techniques may utilize an extended CRS sequence periodicity, which may increase the number of CRS sequences transmitted by a cell. | 07-31-2014 |
20140233530 | METHODS AND APPARATUS FOR ACCESSING DORMANT CELLS - A method, a computer program product, and an apparatus are provided. The apparatus may be a UE. The UE receives an information block from a first base station while camped on a second base station. In an aspect, the information block includes an indication of a random access configuration for performing at least a part of a random access procedure. The UE determines to reselect to the first base station from the second base station. The UE performs at least a part of a random access procedure with the first base station based on the indicated random access configuration to reselect from a second base station to the first base station. | 08-21-2014 |
20140235243 | ACTIVATION PROCEDURE FOR DORMANT CELLS - A method, an apparatus, and a computer program product for wireless communication are provided. The apparatus may be a UE. The UE receives synchronization signals and an information block from a first base station. The information block includes information indicating whether the first base station is in a dormant state or an active state. The UE detects the first base station based on the received synchronization signals and on the information indicating whether the first base station is in the dormant state or the active state. The UE may receive, from a second base station, an indication of resources for detecting the first base station. The synchronization signals and the information block may be received in the indicated resources. The UE may move to the first base station from a second base station in a handoff from the second base station to the first base station. | 08-21-2014 |
20140241325 | METHOD AND APPARATUS FOR HYBRID FDM-CDM STRUCTURE FOR SINGLE CARRIER BASED CONTROL CHANNELS - A system and method for hybrid FDM (frequency division multiplexing)-CDM (code division multiplexing) structure for single carrier control channels is provided. The hybrid FDM-CDM structure maximizes frequency diversity over the entire available bandwidth such that orthogonality between signals from users in a given cell is maintained. Thus, users in the given cell can transmit over a non-contiguous set of tones. Furthermore, the hybrid FDM-CDM structure maintains orthogonality of a pilot of users in different cells based on a despreading operation in the time domain. | 08-28-2014 |
20140247766 | SMALL CELL EVOLVED MULTIMEDIA BROADCAST MULTICAST SERVICE - A method by a small cell for wireless communication may include receiving, by the small cell, a wireless Multicast-Broadcast Single Frequency Network (MBSFN) signal from a macro cell, wherein the small cell is characterized by having a transmit power substantially less than each macro cell in a wireless communication network with the small cell. The method may further include obtaining, by the small cell, a measurement value of the MBSFN signal within a radio range of the small cell. The method may further include acting, by the small cell, based on the measurement value. The small cell may be, or may include, at least one of a pico cell, a femto cell, or a home evolved Node B (HeNB). | 09-04-2014 |
20140293971 | EMPLOYING NEIGHBORING CELL ASSISTANCE INFORMATION FOR INTERFERENCE MITIGATION - Certain aspects of the present disclosure relate to methods and apparatus for employing a neighboring cell's assistance information for interference mitigation (e.g., by conveying the information to a user equipment). A base station (BS) may determine assistance information for a neighboring cell and convey it to a user equipment (UE). A UE may receive assistance information for a neighboring cell and use that information for performing interference cancellation or suppression on received signals. The UE may receive the assistance information from a serving cell or a non-serving cell. The assistance information may be valid for a particular transmission instance, for a known period of time, or until updated by a BS. | 10-02-2014 |
20140295907 | INTER-CELL POWER CONTROL IN THE PRESENCE OF FRACTIONAL FREQUENCY REUSE - System(s) and method(s) are provided for inter-cell power control in the presence of fractional frequency reuse in a wireless communication system. Transmission power control of a terminal, and ensuing inter-cell interference mitigation, is accomplished by receiving load indicators from non-serving sectors, decoding those load indicators corresponding to the non-serving sectors that operate in the same frequency bands as the terminal, and adjusting the transmission power according the states of the decoded load indicators in conjunction with the associated non-serving sectors' forward link signal-to-interference-and-noise ratio at the terminal. The states of the load indicators reflect magnitudes of interference metrics with respect to threshold values. Load indicators can also be conveyed by the non-serving sector to a base station serving the terminal through a backhaul communication, and said base station can schedule an adjusted transmission power for the terminal. | 10-02-2014 |
20140301251 | INTERFERENCE CANCELLATION/SUPPRESSION IN TDD WIRELESS COMMUNICATIONS SYSTEMS - A wireless user equipment (UE) may receive a downlink transmission from a base station in a first subframe of a first subframe configuration, and determine that a neighboring base station is operating according to a second subframe configuration. The UE may modify interference operations for the downlink transmission in the first subframe based on the determination to account for the neighboring base station operating according to the different subframe configuration. Modifying interference operations may include, for example, skipping interference operations, applying different interference operations to a subframe or a portion of a subframe, or a combination thereof. Modifying interference operations may be based on one or more characteristics of the neighboring base station communications. | 10-09-2014 |
20140301268 | NETWORK ASSISTED INTERFERENCE CANCELLATION/SUPPRESSION FOR MULTIPLE SERVICES - Certain aspects of the present disclosure relate to methods and apparatus for network assisted interference cancellation (IC) and interference suppression (IS) for multiple services. According to aspects a user equipment (UE) may determine information regarding system parameters for one or more types of communications services used to transmit potentially interfering signals in one or more neighbor cells, wherein a type of the information determined depends on the type of communications service. The UE may perform interference management using the determined information to cancel or suppress interference caused by the potentially interfering signals. | 10-09-2014 |
20140301271 | CHANNEL STATE INFORMATION REFERENCE SIGNAL (CSI-RS) HANDLING FOR NETWORK ASSISTED INTERFERENCE CANCELLATION - A method of wireless communication includes transmitting channel state information reference signal (CSI-RS) configuration information to a user equipment (UE). The CSI-RS configuration information is transmitted so that the UE may mitigate interference caused by interfering CSI-RSs. The CSI-RS configuration may be a CSI-RS configuration of a neighbor cell. | 10-09-2014 |
20140301292 | TPR MANAGEMENT FOR EPDCCH IN LTE - For an enhanced physical downlink control channel (EPDCCH), unlimited traffic-to-pilot ratio (TPR) variations across resource elements of a physical resource block (PRB) pair is problematic because of the detrimental affect the variations will have on the ability of a user equipment (UE) to perform inter-cell/intra-cell interference suppression (IS) and/or interference cancellation (IC) on EPDCCH of an interfering cell. A TPR limitation is placed on EPDCCH to facilitate IS/IC without causing practical limitations on EPDCCH management by an eNB. Accordingly, a method, an apparatus, and a computer program product for wireless communication are provided. The apparatus identifies a plurality of resource elements of at least one PRB pair for transmitting one or more control channels, divides the plurality of identified resource elements into one or more groups, and restricts a plurality of resource elements in a respective group to a TPR. | 10-09-2014 |
20140301298 | METHODS AND APPARATUS FOR TRANSMISSION RESTRICTION AND EFFICIENT SIGNALING - Certain aspects of the present disclosure relate to methods and apparatus for transmission restriction and efficient signaling. A base station (BS) may determine information regarding a restricted set of system parameters used for transmission from at least one of the serving BS or one or more potentially interfering BSs and signal the information to a user equipment (UE). According to certain aspects, a UE may receive the signaling of information regarding the restricted set of system parameters used for transmission from at least one of the serving BS or the one or more potentially interfering BSs and use the information to cancel interference by transmissions from the one or more potentially interfering BSs or serving BS. | 10-09-2014 |
20140301311 | MULTIPLEXING OF CONTROL AND DATA WITH VARYING POWER OFFSETS IN A SC-FDMA SYSTEM - Systems and methodologies are described that facilitate multiplexing of control information and data for common transmission in a localized FDM wireless communication system. Localized FDM transmission of control and data channels can be achieved by, for example, multiplexing control information with data and transmitting the control information and data using resources and transmission schemes specified for transmission of the data. To ensure the reliability of control information multiplexed with data, a power offset can be applied to the control information to provide varying protection levels for the control information based on properties of the data resources into which it is embedded in order to maintain a predetermined signal quality for the control information independent of the data resources. | 10-09-2014 |
20140302863 | VIRTUAL CELL MANAGEMENT FOR INTERFERENCE SUPPRESSION AND INTERFERENCE CANCELLATION IN LTE - In some aspects, a method for performing wireless communication includes configuring a set of virtual cells for user equipments (UEs). One or more virtual cells of the set is associated with at least one set of parameters. The method also includes transmitting information, to the UEs, regarding the set of the virtual cells, and operating, for a same virtual cell, according to a same set of parameters for some or all of the UEs. In other aspects, a method for performing wireless communications includes receiving, from a node, information regarding, for a UE, a set of virtual cells associated with a set of parameters. The method also includes communicating with the node. The communication is based on a virtual cell and its associated set of parameters. | 10-09-2014 |
20140307675 | PILOT STRUCTURES FOR ACK AND CQI IN A WIRELESS COMMUNICATION SYSTEM - Techniques for transmitting data and pilot for control information are described. In one aspect, a user equipment (UE) may spread a reference signal sequence with a first orthogonal sequence to obtain multiple pilot sequences. The UE may then send the multiple pilot sequences on multiple subcarriers in multiple symbol periods, one pilot sequence in each symbol period. The UE may modulate the reference signal sequence with control information (e.g., ACK information) to obtain a modulated sequence. The UE may spread the modulated sequence with a second orthogonal sequence to obtain multiple data sequences. The UE may then send the multiple data sequences on the multiple subcarriers in multiple symbol periods for data. In another aspect, the UE may send multiple pilot sequences on multiple subcarriers in multiple symbol periods separated by at least one symbol period, one pilot sequence in each symbol period. | 10-16-2014 |
20140341018 | TECHNIQUES FOR SELECTING SUBFRAME TYPE OR FOR INTERLEAVING SIGNALS FOR WIRELESS COMMUNICATIONS OVER UNLICENSED SPECTRUM - Methods and apparatuses are described in which an unlicensed spectrum is used for Long Term Evolution (LTE) communications. A first method includes comparing past transmission activity on an unlicensed spectrum to an activity threshold, transmitting a first subframe type in the unlicensed spectrum during a next active transmission when the past transmission activity is greater than the activity threshold, and transmitting a second subframe type in the unlicensed spectrum during a next active transmission when the past transmission activity is lesser than the activity threshold, the second subframe type comprising a more robust subframe type than the first subframe type. A second method includes generating one or both of PUCCH signals and PUSCH signals based on interleaved signals that increase nominal bandwidth occupancy in an unlicensed spectrum, and transmitting the generated signals in the unlicensed spectrum. A third method includes receiving the PUCCH signals and the PUSCH signals. | 11-20-2014 |
20140341024 | CONCURRENT WIRELESS COMMUNICATIONS OVER LICENSED AND UNLICENSED SPECTRUM - Methods and apparatuses are described for wireless communications. A first method includes transmitting a first Orthogonal Frequency-Division Multiple Access (OFDMA) communications signal to a wireless node in a licensed spectrum, and transmitting, concurrently with the transmission of the first OFDMA communications signal, a second OFDMA communications signal to the wireless node in an unlicensed spectrum. A second method includes receiving a first Orthogonal Frequency-Division Multiple Access (OFDMA) communications signal from a wireless node in a licensed spectrum, and receiving, concurrently with the reception of the first OFDMA communications signal, a second OFDMA communication signal from the wireless node in an unlicensed spectrum. A third method includes generating a periodic gating interval for a cellular downlink in an unlicensed spectrum, and synchronizing at least one boundary of the periodic gating interval with at least one boundary of a periodic frame structure associated with a primary component carrier of the cellular downlink. | 11-20-2014 |
20140341035 | BEACON TRANSMISSION OVER UNLICENSED SPECTRUM - Methods and apparatuses are described in which an unlicensed spectrum is used for Long Term Evolution (LTE) communications. A first method includes broadcasting beacon signals in an unlicensed spectrum at predetermined times from an evolved Node B (eNB). A second method includes receiving beacon signals broadcast in an unlicensed spectrum at predetermined times from an eNB. The beacon signals may include downlink signals identifying the eNB and at least one associated attribute of the eNB. | 11-20-2014 |
20140341053 | WIRELESS FEEDBACK COMMUNICATIONS OVER UNLICENSED SPECTRUM - Methods and apparatuses are described in which an unlicensed spectrum is used for Long Term Evolution (LTE) communications. A first method includes receiving feedback information from a user equipment (UE) via a primary component carrier (PCC) uplink in a licensed spectrum. A second method includes transmitting feedback information from a UE to an evolved Node B (eNB) via a PCC uplink in a licensed spectrum. The feedback information may address signals transmitted to the UE via a downlink in an unlicensed spectrum | 11-20-2014 |
20140341207 | LISTEN-BEFORE-TALK RESERVATION SCHEME FOR WIRELESS COMMUNICATIONS OVER UNLICENSED SPECTRUM - Methods and apparatuses are described in which an unlicensed spectrum is used for Long Term Evolution (LTE) communications. A first method includes synchronizing clear channel assessment (CCA) slots across a plurality of base stations to determine availability of an unlicensed spectrum for transmissions in a next transmission interval. A second method includes performing a CCA during one of a plurality of CCA slots synchronized across a plurality of evolved Node Bs (eNBs) to determine availability of unlicensed spectrum for transmissions in a next transmission interval. | 11-20-2014 |
20140342745 | GATING SCHEME FOR WIRELESS COMMUNICATION OVER UNLICENSED SPECTRUM - Methods and apparatuses are described in which an unlicensed spectrum is used for Long Term Evolution (LTE) communications. One method includes performing a clear channel assessment (CCA) for an unlicensed spectrum in a current gating interval to determine whether the unlicensed spectrum is available for a transmission in a next transmission interval, and gating OFF the transmission in the unlicensed spectrum for the next transmission interval when the determination is that the unlicensed spectrum is unavailable. | 11-20-2014 |
20140362780 | LTE/LTE-A UPLINK CARRIER AGGREGATION USING UNLICENSED SPECTRUM - Methods, systems, and apparatuses are described for wireless communications. In one method, an uplink grant may be received over a licensed spectrum. A clear channel assessment (CCA) may be performed in response to the uplink grant to determine availability of an unlicensed spectrum. The CCA may be performed prior to a transmission associated with the uplink grant. In another method, scheduling information may be received over a licensed spectrum. An uplink grant may be transmitted over the licensed spectrum. The uplink grant may be based at least in part on the scheduling information. The uplink grant may be configured to trigger a CCA to determine availability of an unlicensed spectrum prior to a transmission associated with the uplink grant. | 12-11-2014 |
20140364117 | REFERENCE SIGNAL DESIGN FOR CELL SEARCH IN AN ORTHOGONAL WIRELESS COMMUNICATION SYSTEM - Systems and methodologies are described that facilitate efficient cell acquisition in a wireless communication system. In one aspect, a reference signal for use in cell acquisition can be constructed in a bandwidth-agnostic manner such that it contains a common central portion in a predetermined frequency band that is independent of a bandwidth utilized by an associated wireless communication system. The central portion can be constructed as a two-dimensional block in time and frequency that spans a default cell search bandwidth, a predetermined bandwidth specified by synchronization codes or other signals, or another suitable bandwidth. A reference signal can then be constructed form the central portion by tiling or expanding the central portion such that it spans the entire system bandwidth. | 12-11-2014 |
20150016412 | USING UE ENVIRONMENTAL STATUS INFORMATION TO IMPROVE MOBILITY HANDLING AND OFFLOAD DECISIONS - User equipment (UE) connection handling is disclosed in which UE environmental status information is used at a network entity to make informed decisions regarding mobility handling and data offloading. A UE determines its environmental status information based on input from at least one non-RF sensor located in the UE. The UE generates and then transmits a control message comprising the UE environmental status information to a network entity in communication with the UE. The network entity receives the control message and uses the UE environmental status information to manage a connection of the associated UE based at least in part on the UE environmental status information. | 01-15-2015 |
20150031382 | PAGING A USER EQUIPMENT OVER UNLICENSED SPECTRUM - Methods and apparatus for paging comprise receiving data destined for a UE. The methods and apparatus further comprise determining a short identity for the UE relative to a longer global user equipment identity and identifying a MIB transmission based on a short identity. Moreover, the methods and apparatus comprise activating a bit within a slot of the MIB transmission to indicate that the user equipment listen for a page in order to receive the data and broadcasting the MIB. In other aspects, methods and apparatus for receiving a page comprise entering an idle state while camped on a cell. The methods and apparatus further comprise waking up from the idle state to monitor a slot of a MIB for a paging indication. Moreover, the methods and apparatus comprise recognizing the paging indication in the monitored slot of the MIB, determining a paging window based on correlation information in a SIB and waking up to listen for a page during the paging window. | 01-29-2015 |
20150043523 | TRANSMISSION AND RECEPTION OF COMMON CHANNEL IN AN UNLICENSED OR SHARED SPECTRUM - Methods, systems, and apparatuses are described for wireless communications, in which transmission of common information to two or more receivers over unlicensed spectrum may be provided. The common information may be transmitted over a number (e.g., a set) of different carrier frequencies of the unlicensed spectrum. A staggering pattern may be employed to transmit all or a part of the common information across each of the carrier frequencies in the set of carrier frequencies. The detection of the information on one of the carrier frequencies may provide information that may be used to derive the staggering pattern. The duration of the common information transmission on each of the carrier frequencies may be selected such that a clear channel assessment (CCA) to determine availability of the unlicensed spectrum is not required. | 02-12-2015 |
20150043687 | INTRA-FREQUENCY AND INTER-RAT RECEIVER - Techniques are described for wireless communications. In one example, multiple signals including at least a wireless local area network (WLAN) signal and a cellular signal may be received over a bandwidth of an unlicensed radio frequency spectrum band. Digital samples of the signals may be stored in a buffer. At least a portion of the WLAN signal may be reconstructed from the stored digital samples and removed from the stored digital samples before the contents of the buffer are converted to the frequency domain for demodulation and decoding of the cellular signal by a cellular receiver. In another example, multiple signals may be received over a bandwidth of an unlicensed radio frequency spectrum band, and it may be determined whether to apply codeword-level interference cancelation (CWIC) or symbol-level interference cancelation (SLIC) to remove an interference signal in the multiple signals. | 02-12-2015 |
20150049708 | HARQ DESIGN FOR LTE IN UNLICENSED SPECTRUM UTILIZING INDIVIDUAL ACK/NACK - Methods, systems, and apparatuses are described for wireless communications. In one method, a sequence number corresponding to a data frame and one or more data subframes of the data frame may be transmitted over an unlicensed spectrum to a user equipment (UE), and hybrid automatic repeat request (HARQ) feedback for the one or more data subframes may be received over the unlicensed spectrum, from the UE, when the sequence number corresponding to the data frame is received by the UE in a specified order. In another method, a sequence number corresponding to a data frame and HARQ feedback may be transmitted over an unlicensed spectrum to a UE, and one or more data subframes may be received over the unlicensed spectrum, from the UE, in response to the HARQ feedback when the sequence number corresponding to the data frame is received by the UE in a specified order. | 02-19-2015 |
20150049709 | GROUP ACK/NACK FOR LTE IN UNLICENSED SPECTRUM - Methods, systems, devices, and apparatuses are described for wireless communications. In one method, a set of one or more data subframes of a data frame may be transmitted over an unlicensed spectrum, to a user equipment (UE), during a transmission period. A group hybrid automatic repeat request (HARQ) feedback message for a plurality of data subframes including at least one of the data subframes in the set of one or more data subframes may then be received over the unlicensed spectrum, from the UE, during the transmission period. In another method, a set of one or more data subframes of a data frame may be received over an unlicensed spectrum during a transmission period. A group HARQ feedback message for a plurality of data subframes including at least one of the data subframes in the set of one or more data subframes may then be transmitted over the unlicensed spectrum during the transmission period. | 02-19-2015 |
20150049712 | Uplink Procedures For LTE/LTE-A Communication Systems With Unlicensed Spectrum - Long term evolution (LTE)/LTE-Advanced (LTE-A) deployments with unlicensed spectrum leverage more efficient LTE communication aspects over unlicensed spectrum, such as over WIFI radio access technology. In order to accommodate such communications, various uplink procedures may be modified in order to handle communications between licensed and unlicensed spectrum with LTE/LTE-A deployments with unlicensed spectrum. | 02-19-2015 |
20150049741 | Downlink Procedures For LTE/LTE-A Communication Systems With Unlicensed Spectrum - Long term evolution (LTE)/LTE-Advanced (LTE-A) deployments with unlicensed spectrum leverage more efficient LTE communication aspects over unlicensed spectrum, such as over WIFI radio access technology. In order to accommodate such communications, various downlink procedures may be modified in order to handle communications between licensed and unlicensed spectrum with LTE/LTE-A deployments with unlicensed spectrum. | 02-19-2015 |
20150055541 | LTE BASED MULTICAST IN UNLICENSED SPECTRUM - Methods, systems, and devices are described for broadcast signal transmission using a number of nodes in an unlicensed spectrum. A set of nodes may be identified for use in transmission of a broadcast signal, with a first subset of the nodes transmitting the broadcast signal to deliver first content during a first time period, and with a second subset of the nodes transmitting the broadcast signal to deliver second content during a second time period. The first subset of nodes is different than the second subset of nodes. The set of nodes may thus form a single frequency network (SFN) that performs partial SFN operation during the first and second time periods. | 02-26-2015 |
20150055589 | COMMON HARQ PROCESSES - A sharing of common hybrid automatic repeat request (HARQ) process space by multiple unlicensed spectrum component carriers is described. Because communication access is not guaranteed over the unlicensed spectrum, a set of component carriers in the unlicensed spectrum is assigned to share a common HARQ process space, such that uplink or downlink data will be transmitted over any one or more of the set of component carriers that clear a clear channel assessment (CCA) check. The receiver then provides a HARQ process response over the same HARQ process space using the grouped component carriers that share that common HARQ process space. Thus, any one or more of the set of component carriers sharing the common HARQ process space may both carry the transmitted data and carry the HARQ process response to the attempted data transmission. | 02-26-2015 |
20150055630 | HANDOVER MECHANISM THAT EXPLOITS UPLINK CHANNEL QUALITY OF A TARGET CELL - System(s) and method(s) are provided for handover of a mobile terminal in a wireless communication system. Handoff resolution relies on both a downlink channel quality indication between a serving base station and the mobile terminal, and uplink channel quality indications amongst the terminal and a measurement set of target base stations. To generate UL channel quality indicators, the mobile station conveys a narrowband or broadband sounding reference signal, and serving and target base stations measure UL and DL performance metrics (e.g., RSRP, RSSI, or RSOT). In backward handover, UL channel state information from target cells is received at the serving base station through backhaul communication, and handoff is resolved based on both UL and DL quality reports. In forward handover, the set of UL quality reports are conveyed to the mobile station to determine a target cell for handoff. | 02-26-2015 |
20150063262 | SUBFRAME DEPENDENT PHYSICAL UPLINK CONTROL CHANNEL (PUCCH) REGION DESIGN - According to certain aspects, resources allocated to a user equipment (UE) for physical uplink control channel (PUCCH) transmissions may be determined in a subframe-type dependent manner. As a result, PUCCH regions for different subframes may vary based on the subframe types. | 03-05-2015 |
20150067435 | RESOURCE MAPPING TO HANDLE BURSTY INTERFERENCE - Resource mapping and coding schemes to handle bursty interference are disclosed that provide for spreading the modulated symbols for one or more transmission code words over more symbols in the time-frequency transmission stream. Certain aspects allow for the modulated symbols to be based on bits from more than one code word. Other aspects also provide for re-mapping code word transmission sequences for re-transmissions based on the number of re-transmissions requested by the receiver. Additional aspects provide for layered coding that uses a lower fixed-size constellation to encode/decode transmissions in a layered manner in order to achieve a larger-size constellation encoding. The layered encoding process allows the transmitter and receiver to use different coding rates for each coding layer. The layered encoding process also allows interference from neighboring cells to be canceled without knowledge of the actual constellation used to code the interfering neighboring signal. | 03-05-2015 |
20150071060 | COUPLING UPLINK AND DOWNLINK CCA IN LTE-U - Methods, systems, and devices are described contention-based channel access procedures that may enhance efficiency in communications using unlicensed spectrum. A time period may be identified during which base stations perform contention-based downlink channel access procedures for access to a channel in an unlicensed spectrum. The base stations may be coordinated such that different base stations may seek channel access during different time intervals during the time period. Contention-based uplink channel access procedures for UEs may then be modified to favor one or more UEs that are associated with a base station that has won channel access. | 03-12-2015 |
20150085797 | LTE-U UPLINK WAVEFORM AND VARIABLE MULTI-SUBFRAME SCHEDULING - Uplink waveforms for operating long term evolution (LTE) in an unlicensed band (i.e., long term evolution-unlicensed (LTE-U) communication) are disclosed. Carrier aggregation (CA) and standalone (SA) are disclosed. LTE on the licensed channel may provide both control and data, LTE on the unlicensed channel may provide data. Managing variable transmission time interval (TTI) continuous transmission is disclosed for transmission over multiple subframes of an unlicensed carrier in LTE-U. Listen-before-talk (LBT) requirements of unlicensed carriers provide for additional channel occupancy constraints when scheduling resources for multiple UEs for variable TTI continuous uplink transmissions over multiple subframes. A joint control channel is disclosed that provides control information for all of the potentially available subframes to be scheduled for the uplink transmissions. In addition to management of the variable TTI continuous transmissions, adjustments to uplink signal parameters are also disclosed that address the constraints due to the LBT requirements of unlicensed carriers. | 03-26-2015 |