Entries |
Document | Title | Date |
20090078847 | DISTRIBUTED NETWORK VIBRATION ISOLATION SYSTEM AND VIBRATION ISOLATORS USEFUL THEREIN - A distributed network vibration isolation system includes several vibration isolation nodes distributed throughout a structure. The nodes wirelessly intercommunicate and include a passive structural isolation device and an active structural isolation device. The nodes work together via wireless communication to isolate a payload from a disturbance source. | 03-26-2009 |
20090256049 | Quakeproof plinth to shelter a showpiece thereon - A quakeproof plinth is adapted to make a showpiece mount vertically go down without a tilt so as to cushion and shelter a showpiece seated thereon from impact force exerted on the entire showpiece. A plinth ( | 10-15-2009 |
20090261228 | Temperature Control Within Disk Drive Testing Systems - A disk drive test slot thermal control system includes a test slot including a housing having an outer surface, an internal cavity defined by the housing and including a test compartment for receiving and supporting a disk drive transporter carrying a disk drive for testing, and an inlet aperture extending from the outer surface of the housing to the internal cavity. The disk drive test slot thermal control system also includes a cooling conduit, and a thermoelectric device mounted to the cooling conduit. The thermoelectric device is configured to cool or heat an air flow entering the internal cavity through the inlet aperture. | 10-22-2009 |
20090272870 | ROTATING TABLE FOR DISPLAY DEVICE - The invention provides a rotating table for a display device which can rotate around the horizontal shaft by a manual operation in addition to a small motor drive. A rotating table for a display device includes a rotating member arranged so as to be rotatable around a horizontal shaft, and in which the display device is arranged, a balancing device balancing with a gravity moment around the horizontal shaft in the display device, and a first motor-driven rotating mechanism rotating the rotating member around the horizontal shaft, and the first motor-driven rotating mechanism includes gear trains converting a rotation of an electric motor into a rotation of the rotating member, and a rotation allowing device allowing a rotation of the gear trains only in a case of a rotation having a torque not less than a predetermined torque with respect to the rotation from the rotating member side. | 11-05-2009 |
20090283657 | Pendulum Actuated Automatic Leveler - An automatic apparatus for leveling suspended articles or hung objects to an angle relative to a reference. The shift lever assembly ( | 11-19-2009 |
20100001168 | DAMPING APPARATUS AND EXPOSURE APPARATUS - A damping apparatus that supports and dampens a stage apparatus that positions and drives a stage to a target position is provided herein. The damping apparatus including a support plate part, a support force generating means, and a first controlling means. The support plate part supports the stage apparatus. The support force generating means exerts a damping action by applying a support force to the support plate part in the vertical directions. The first controlling means uses the acceleration of the stage, which is derived from a target track, to the target position, to control the support force generated by the support force generating means so as to compensate for forces that both occur as a result of the acceleration of the stage and cause the support plate part to tilt. The present invention controls vibration and the tilt of a base plate with high precision. | 01-07-2010 |
20100019120 | MULTIPLE AXIS GIMBAL EMPLOYING NESTED SPHERICAL SHELLS - A multi-axis gimbal has each axis defined by a respective spherical shell driven by a flat, compact motor attached to the driven shell and to a next outer shell (or to an external mounting platform, in the case of the outermost shell). The shells rotate about respective axes. In one configuration, the outermost shell is referred to as the “azimuth” shell because in use it rotates about a vertical axis. The next inner shell is an elevation shell that rotates about a first horizontal axis that is orthogonal to the axis of the camera or other sensor payload. An optional third shell can be used to provide “roll” motion, such as rotating a camera about its axis to obtain a particular rotational orientation with respect to a target. | 01-28-2010 |
20100032543 | VESSEL, MOTION PLATFORM, METHOD FOR COMPENSATING MOTIONS OF A VESSEL AND USE OF A STEWART PLATFORM | 02-11-2010 |
20100065711 | Vertically Adjustable Furniture Item - A vertically adjustable item of furniture with a vertical pipe, a supporting base arranged at a first end of the vertical pipe, a guide bush fastened to a second end of the vertical pipe opposite to the supporting base, a cylinder which is arranged coaxially in the vertical pipe a piston which divides the cylinder into a first work chamber and a second work chamber, a piston rod fastened by its first end to the piston extends through the second work chamber and a connection between the first work chamber and the second work chamber which can be blocked by a valve actuatable by an actuating device. The valve is controllable electromagnetically. The furniture item comprises a sensor or switch which generates a signal causing the valve to close when the piston reaches a position in the cylinder near the valve. | 03-18-2010 |
20100213345 | Device and Method for Suspension of a Vehicle Seat by Means of Additional Volumes - A device and method for suspension of a vehicle seat by means of additional volumes, in particular a utility vehicle seat, comprising at least one air spring for height adjustment of a seat part of said air spring being arranged between the seat part and a lower part, and a control device for controlling the supply and discharge of at least one additional volume to or from the air spring, wherein, at predefinable speed or acceleration values of a spring movement of the air spring, the additional volume which can be supplied or discharged can be switched on or off by means of the control device in such a way that, in end-of-travel regions of the air spring, the profile of a force/travel air spring characteristic during an extension and/or return spring movement of the air spring does not exhibit any incline in a first and in a second range. | 08-26-2010 |
20100320357 | ACTIVE SUSPENDING - An apparatus has an active suspension including an electromagnetic actuator coupled to a plant in a vehicle. A force bias eliminator is coupled to the plant for causing the actuator to experience a zero-mean load, and a vibration isolation block generates a control signal based on the response of a nominal plant to measured disturbances of the actively suspended plant. A compensation system modifies the control signal in response to a difference between the response of the nominal plant to the control signal and a measured response of the actively-suspended plant to the control signal. | 12-23-2010 |
20110089308 | CONTROLLING VIBRATIONS - In order to control vibrations of two parts of a piece of machinery, a variable force may be generated to oppose the vibrations, with the variable force being generated under control of a controller on the basis of an iterative relationship, the iterative relationship being such as to generate the force of one iteration using a controller output signal in frequency domain vector form derived from the controller output signal of the immediately previous iteration in frequency domain vector form plus a frequency domain vector quantity derived from the resultant vibration of more than one previous iteration. Where these two parts are connected by multiple (f) mounting devices, the controller output signals a previous iterations are taken into account, and the frequency domain vector quantity derived from the controller output signals and more than f previous iterations. The information corresponding to the vibration frequency may be derived from a rotating shaft, where the two parts are the engine and chassis of a vehicle. It is also possible generate a force between the two parts which is a harmonic of the frequency of vibration being suppressed. | 04-21-2011 |
20110127400 | ACTIVE VIBRATION ISOLATION SYSTEM HAVING AN INERTIAL REFERENCE MASS - An active vibration isolation system comprises a platform ( | 06-02-2011 |
20110133049 | Vibration control of an optical table by disturbance response decoupling - This invention discloses an optical table and the vibration control method thereof. Using disturbance response decomposing techniques, a double-layer structure is applied to independently control the ground and load disturbances. This invention can simplify the vibration control and improve system performance. | 06-09-2011 |
20110204203 | STEERABLE VEHICLE LIGHTING SYSTEM - A steerable vehicle lighting system includes a steerable platform assembly and a control assembly. The steerable platform assembly has a body adapted to be mounted to a vehicle, a platform adapted to receive a payload and adapted to rotate with respect to the body, an actuator at least partially placed in the body, and an actuator rod rotatably mated to the actuator and rotatably mated to the platform. A rotation of the actuator rotates the platform. The control assembly includes a first wheel adapted to be placed on a rotating portion of a steering apparatus, a transducer adapted to be mated to a stationary portion of the steering apparatus, a second wheel mated to a rotatable portion of the transducer and adapted to be rotated by the first wheel, and an elastic member that elastically urges the transducer and the second wheel towards the first wheel. | 08-25-2011 |
20110240826 | MULTIMEDIA DEVICE BRACKET - An apparatus and method for mounting various audio devices to a flat panel display employing mounting holes disposed on a rearward face of the panel of the flat panel display that are otherwise normally employed to couple a support of the flat panel display to the panel of the flat panel display, wherein a hub supporting rods that in turn support the audio devices is coupled to the rearward face of the panel with the aid of those holes, and wherein the hub and rods together convey electrical signals between at least one of the audio devices and at least one cable. | 10-06-2011 |
20120056069 | VIBRATION ISOLATION - A support for machinery, and for isolating vibration from the machinery, comprises a plurality of mounts, each mount comprising an elastomeric block for completely supporting the static load of the machinery, and active isolation means comprising inertial shakers arranged to maintain essentially a zero stiffness of the mount to excited structural resonances over a desired frequency band above said mount resonant frequency, and to modify the transmission of out of balance forces to the hull. A control system coupled to the inertial shakers includes a means for applying damping force signals, such as to dampen structural resonances, to inhibit the onset of resonant vibration. | 03-08-2012 |
20120097823 | HARDENED DATA RECORDING SYSTEM FOR DRILLING RIGS AND OTHER DRILLING EQUIPMENT - A system for recording data associated with a drilling rig is disclosed. In one embodiment, such a system includes one or more hardened memory devices and a memory interface unit to receive one or more data streams containing drilling data. The memory interface unit is configured to extract the drilling data from the data streams and store the drilling data on the one or more hardened memory devices. If desired, the hardened memory devices may be distributed across a drilling rig to increase the probability that recorded data will survive a catastrophic event. Optionally, the system includes a communication device to enable communication with a remote site. | 04-26-2012 |
20120235013 | Instrumented Platform For Vibration Sensitive Equipment - A platform that includes a vibration sensor located within an inner core of a table. The table may have a first plate that supports a vibration-sensitive payload. The first plate may be separated from a second plate by the inner core. The sensor can be located within the core directly below the device. The sensor can be connected to an electrical connector attached to an external surface of the table. A monitor can be readily plugged into the electrical connector to obtain vibration data from the sensor. The platform may also include a damper located within the inner core to reduce vibration of the table. The damper may be an active device that is connected to control circuits located within, or outside, the inner core. | 09-20-2012 |
20120248282 | Shock-Isolation Structure - A shock isolation structure for mounting a radar system to a supporting surface on board of a vessel includes a platform on which the radar system can be attached, six strut-like damping elements operating in both tension and compression between the platform and the supporting surface. The damping elements are oriented in a truss configuration with first ends of the damping elements connected to the supporting surface for universal movement and with second ends of the damping elements connected to the platform for universal movement. Each of the damping elements includes a magnetorheological or electrorheological fluid damper. | 10-04-2012 |
20120292476 | THERMALLY-CONDUCTIVE VIBRATION ISOLATORS AND SPACECRAFT ISOLATION SYSTEMS EMPLOYING THE SAME - Embodiments of a thermally-conductive vibration isolator are provided, as are embodiments of a spacecraft isolation employing a plurality of thermally-conductive vibration isolators. In one embodiment, the thermally-conductive vibration isolator includes a first end portion, a second end portion substantially opposite the first end portion, and first and second load transfer paths from the first end portion to the second end portion. The first and second load transfer paths comprise a main spring and a damper in parallel with the main spring, respectively. An elongated thermal conduit, which has a thermal conductivity exceeding that of first load transfer path and the second load transfer path, extends from the first end portion to the second end portion. | 11-22-2012 |
20120292477 | Apparatus For Moving A Display Apparatus - Apparatus for moving a display appliance, for example a television set, or a display apparatus of the display appliance between a display position and a standby position, with a remote control for operating the display appliance, with a drive unit for moving the display appliance or the display apparatus thereof between the display position and the standby position, and with a control unit for actuating the drive unit. The control unit includes a detection device for detecting the operational state of the display appliance. The control unit actuates the drive unit depending on output signals from the detection device such that the drive unit moves the display appliance or the display apparatus thereof into the display position when said display appliance is switched on and moves the display appliance or the display apparatus thereof into the standby position when said display appliance is switched off. | 11-22-2012 |
20130001396 | Instrumented Platform For Vibration-Sensitive Equipment - A vibration damper assembly that can be attached and moved about a payload surface of a table. The vibration damper assembly includes a sensor and a damper located within a housing. The housing can be attached to the payload surface by one or more fasteners. An operator can move the vibration damper assembly to different locations of the payload assembly to optimize the damping function of the assembly. | 01-03-2013 |
20130037687 | ANTI-VIBRATION APPARATUS - The present invention provides an anti-vibration apparatus including an anti-vibration base, a plurality of supporting mechanisms configured to support the anti-vibration base, a plurality of actuators configured to apply a force to the anti-vibration base, an obtaining unit configured to obtain vibration data which represents vibrations on the anti-vibration base, a first calculation unit configured to calculate, based on the vibration data obtained by the obtaining unit, a force to be applied to the anti-vibration base so as to reduce the vibrations on the anti-vibration base, and a distribution unit configured to distribute the force calculated by the first calculation unit to forces to be applied by the plurality of actuators to the anti-vibration base. | 02-14-2013 |
20130126697 | Rotating car wheel display - The Rotating Car Wheel Display allows perspective customers interested in purchasing a car rim or wheel to see the rim or wheel in motion as it would be on the car itself. It operates in a clockwise and counterclockwise motion for spinning wheels and traditional rims and wheels. It is a portable device that can be displayed easily and inexpensively by any wheel and tire shop for more curb appeal. | 05-23-2013 |
20130140424 | Stand - The invention relates to a stand for a surgical microscope ( | 06-06-2013 |
20130140425 | DEVICE AND METHOD FOR DEPLOYMENT OF PHOTOSYNTHETIC CULTURE PANEL ARRAY - A device and system for growing a photosynthetic culture is provided which employs one or a plurality of vertically disposed photopanels having an inner chamber configured for holding liquid and the photosynthetic culture such as algae. The inner chamber of the photopanels may have a shape that is defined as well as structurally supported by bridging elements. The photopanels with the bridging elements may be formed as stepped cones and pyramids utilizing common recyclable clear plastic sheets and membranes. The bridging elements also serve to increases the surface area to volume ratio of the inner chamber, expand the surface area exposed to light, alter the hydrodynamics within the photopanel as well as distribute light as light guides to facilitate homogenization of light exposure to individual cells. The bridging elements also have features that allow utilization of direct light beams with shallow grazing angles. When deployed with a support system that allows both translation and rotation of the photopanels, the deployed photopanel array functions as a complete optical system capable of dynamic control of sun light exposure to an algae culture to optimize photosynthetic efficiency. | 06-06-2013 |
20130146741 | DEVICE AND METHOD FOR DEPLOYMENT OF PHOTOSYNTHETIC CULTURE PANEL ARRAY - A device and system for growing a photosynthetic culture is provided which employs one or a plurality of vertically disposed photopanels having interior cavities configured for holding liquid and the photosynthetic culture such as algae. The inner chamber of the photopanels may have a shape that is structurally supported by bridging elements. The bridging elements may be formed as stepped cones that may function as light guides to the interior chamber. | 06-13-2013 |
20130200247 | PIPE SUPPORT STRUCTURE - A pipe support structure which is constructed to utilize the Coriolis force and the reaction force caused, thereby making it possible to suppress the hose compliance amount in the high temperature area while maintaining the degree of freedom of mountability specific for the resin pipe and to realize the above suppressing effect by the simple construction and at a low cost. | 08-08-2013 |
20130200248 | PNEUMATIC VIBRATION DAMPING APPARATUS - A pneumatic vibration isolating suspension is disclosed for supporting a payload on a moving carrier while suppressing the transmission of vibrations in the 1 to 50 Hz band between the carrier and the payload. The disclosed invention can be deployed in the air in a towed carrier or sonde, and operated from aircraft power, making it a suitable platform for airborne geophysical instrumentation. It also has particular application to airborne electromagnetic surveying operating in the same frequency band because the sensor vibrations that result in noise created by the modulation of the sensor coupling with the earth's magnetic field are suppressed. Furthermore, the invention can be constructed from resistive composite materials and non-magnetic metals, so it can be operated without producing significant modification to the ambient electromagnetic field being measured. | 08-08-2013 |
20130221183 | SUPPORT SYSTEM COMPRISING A CONTROL UNIT - A carry system or a medical ceiling support for carrying or supporting medical-technical devices in a hospital treatment room. The ceiling support is provided with at least one extension or arm arranged substantially horizontally and at least one supporting column; at least one pivot joint and/or at least one lifting and lowering device; a support head mounted at the extension or arm for reception of the medical-technical devices; and an operating aid with at least one operating element for releasing or operating a respective brake in the at least one pivot joint or for operating the at least one lifting and lowering device. The ceiling support is arranged for generation of a feedback or back coupling which identifies or characterizes the respective brake or lifting and lowering device operated by the operating aid for a user locally at the support. | 08-29-2013 |
20130233996 | SELF-GUIDING CELESTIAL TRACKING MOUNT ASSEMBLY - A self-guiding mount for celestial observation equipment and a method of self-guiding, the mount comprising a static plate ( | 09-12-2013 |
20130240705 | VIBRATION SUPPRESSION APPARATUS AND VIBRATION SUPPRESSION METHOD - The present invention provides a vibration suppression apparatus which includes a first object elastically supported on a base, a second object elastically supported on the first object, and a driving unit configured to drive the first object, and which suppresses a vibration of the second object, comprising a first generation unit configured to generate a first signal, a second generation unit configured to generate a second signal, and a control unit configured to control the driving unit, wherein the control unit controls the driving unit based on the first signal, and after the deviation between the relative distance between the base and the first object, and the first reference distance falls within an allowable range, the control unit controls the driving unit based on the first signal and the second signal. | 09-19-2013 |
20130306829 | SUN-CHASING DEVICE - A sun-chasing device is provided, including a base, a first transmitter disposed on the base, a second transmitter, a support, a carrier pivotally connected to the support for carrying a solar module, a first supporting component pivotally connected to the first transmitter and the carrier, and a second supporting component pivotally connected to the second transmitter and the carrier. The sun-chasing device has great rigidity and carrying ability against strong wind, and has great precision and rotation angle, such that a solar plate can precisely aim at sun for long time and thus the efficiency of a solar module is significantly increased. | 11-21-2013 |
20130334393 | DUAL AXIS SOLAR ARRAY TRACKER - There is disclosed a dual axis tracker ( | 12-19-2013 |
20130334394 | ACTIVE SUSPENDING - In an active suspension system for actively suspending a plant, a fail-safe system controlled by a failure-detector has a selectively-activated damper coupled to the plant. The damper may be a separate element from the actuator. Under normal circumstances, the damper is deactivated and therefore generates no damping force. However, if the failure detector detects an abnormal state in the system, it activates the damper, thereby causing a damping force that resists motion of the plant. | 12-19-2013 |
20140014804 | APPARATUS FOR SUPPORTING BODY PART OF WORKER - An apparatus for supporting a worker's body part, for example a surgeon's arm, is provided. The body part is supported by a base movably supported by a support. The apparatus has a free mode and a limitation mode, which are switchable. When it is determined that the body part is attempting to move the base or a fastening member, the operating mode is switched to the free mode. When it is determined that the body part is not attempting to move the base or the fastening member, the operating mode is switched to the limitation mode. The free mode allows the fastening member to fasten the body part on the base and allows a brake to release limitations to the motions of the base. The limitation mode allows the fastening member to release the body part from being fastened and allows the brake to limit the motions of the base. | 01-16-2014 |
20140014805 | HOLDING FORCE ADJUSTING APPARATUS - A holding force adjusting apparatus to be attached to a posture holding apparatus having a base, a supporting member which is attached onto the base so that the supporting member freely swings between a standby state where the supporting member does not support a substance on the base and an active state where the supporting member supports the substance in an inclination state, and a swinging support member having a biasing force for returning the supporting member to the standby state when the supporting member is inclined, the holding force adjusting apparatus being designed to adjust a biasing force of the swinging support member, the holding force adjusting apparatus including a weighting detection member for detecting weight of the substance to be placed, and a returning force adjusting member for adjusting the bias force according to a detected weight by the weight detecting means. | 01-16-2014 |
20140014806 | POSTURE HOLDING APPARATUS - A posture holding apparatus including, a base onto which a substance is placed, a supporting member being attached onto the base so that the supporting member swings between a standby state and an active state, and a swinging support member having a returning force for returning the supporting member to the standby state,
| 01-16-2014 |
20140021324 | LITHOGRAPHY APPARATUS AND METHOD - A lithography apparatus is disclosed, which comprises: a first component, a second component, a coupling device which is configured to couple the first and second components to one another, a capture device for capturing a movement (Z) of a floor on which the lithography apparatus stands, and a control device which is configured to actuate the coupling device depending on the captured movement (Z) of the floor in order to restrict a movement of the second component relative to the first component. | 01-23-2014 |
20140027601 | DEVICE FOR MECHANICAL VIBRATION DECOUPLING - A device is disclosed for mechanical vibration decoupling having two bearing ends to which bodies for reciprocally decoupling vibrations are joined which are interconnected by couplings having a variably adjustable stiffness. The couplings comprise at least three spring beam elements each having a spring beam surface from which a normal vector extends and which are each dimensionally stable in a longitudinal direction and are elastical orthogonal to the spring beam surface. The at least three spring beam elements are disposed spatially relative to each other so that normal vectors thereof are each orientated at an angle α relative to each other with α=90°±30°. | 01-30-2014 |
20140048673 | PIVOTING DISPLAY DEVICE USED IN AIRCRAFT - A pivoting device especially useful in aircraft passenger cabins that can pivot a monitor between stowed and open positions, the pivoting device including a forward/reverse rotatable driving motor. An electromagnetic brake holds the monitor in stowed and opened positions A power unit powers the motor and the electromagnetic brake. A controller controls the pivoting movement of the monitor. The power unit includes a rectifier circuit that transforms AC to a DC, a step-up circuit that steps up the transformed voltage, a voltage regulator that adjusts the transformed voltage to a prescribed DC voltage, and a retraction power retention circuit including a capacitor. When no source voltage is detected while the monitor is in its opened state, the capacitor supplies the power to a voltage regulator of the power circuit, deactivates the electromagnetic brake and reverse rotates the motor to drive the monitor to its stowed position. | 02-20-2014 |
20140054438 | FLEXIBLE APPARATUS AND METHOD FOR CONTROLLING FLEXIBLE APPARATUS - A flexible apparatus is provided. The flexible apparatus includes a sensor configured to detect bending of the flexible apparatus, a bending holder configured to maintain a bending state of the flexible apparatus, and, a controller configured to control operations of the flexible apparatus, wherein when a predetermined input is received while the flexible apparatus is manipulated, the controller controls the bending holder to maintain the bending state of the flexible apparatus. | 02-27-2014 |
20140061423 | FAST RESPONSE DUAL STIFFENED MODE ISOLATOR AND METHOD THEREOF - A fast response, dual stiffness mode isolator including a flexible diaphragm for an isolation piston, a first chamber supporting the flexible diaphragm, a second chamber serving as a reservoir, and a valve connected to a supply, to the first chamber, and to the second chamber and operable to by-pass the second chamber to more quickly direct the supply to the first chamber. | 03-06-2014 |
20140061424 | ISOLATION SYSTEM AND METHOD THEREOF - An isolation system includes a platform, a plurality of isolators for the platform electronically switchable between a soft mode of isolation resulting in a first natural frequency and a stiff mode of isolation resulting in a second natural frequency, and a controller responsive to a signal representing the frequency of a machine on the platform and configured to switch the isolator to the stiff mode of operation when the frequency of the machine approaches or reaches, the first natural frequency to avoid resonance magnification, and otherwise switch the isolation to the soft mode of operation. | 03-06-2014 |
20140061425 | DISPLAY SYSTEM - A display system includes a base member, a rear support member which is connected to one end of the base member in an upward and downward direction, a display device, a support unit which is disposed on an upper portion of the rear support member, and supports the display device such that the display device is movable in position and changeable in position in at least two axial directions, a sound output device which is disposed on the display device and the rear support member, and a control device which controls operations of the support unit, the sound output device and the display device. A bed, a mattress, a bedding covering or the like is provided on the base member such that a user can watch a screen of the display device in a posture where the user has lain above the base member. | 03-06-2014 |
20140091196 | SHOCK SENSITIVE TRANSPORT STABILIZER - A transport device for shock sensitive packages maintains an object in a near zero gravity spatial orientation to reduce or eliminate potentially harmful mechanical shock and or vibration to a body, object or device needing protection. This device has active impact cancellation, and is controlled by a computer via attached sensors that return positional data and reduce or eliminate the deceleration rate of the protected body via programmed algorithms, and rapidly compensating linear actuators. | 04-03-2014 |
20140145059 | GROUND MOUNTED SOLAR MODULE INTEGRATION SYSTEM - Embodiments of the present inventions are directed to systems, devices for use with systems, and method of mounting and retaining solar panels. In some embodiments, an apparatus for mounting one or more solar panel modules above a supporting surface is disclosed, the apparatus including: three foundational members embedded in the supporting surface; a support frame configured to receive the solar panel modules; a support strut assembly configured to attach the support frame to the three foundational members to support the solar panel modules; where the support strut assembly includes a plurality of strut members, and includes one or more adjustment mechanisms that may be used to adjust a length or a joining angle of at least one of the strut members. | 05-29-2014 |
20140166843 | ADAPTIVE VELOCITY TRACKER - The disclosure is directed to a high precision two axis tracking system having adaptive angular velocity comprising: a pedestal coupled to a foundation; a slew drive comprising a modular velocity rotation driver operably coupled to the pedestal; an azimuth yoke operably coupled to the slew drive and hingedly coupled to an elevation hub; an elevation hub comprising a modular velocity elevation driver, hingedly coupled to the azimuth yoke; a directional apparatus configured to be precisely pointed towards a target, operably coupled to the elevation hub; and a processor operably coupled to the tracking system. | 06-19-2014 |
20140175252 | Compact Hoist System - A hoist system having a drum primarily self-contained within a batten, for raising and lowering lighting, sound equipment, curtains and the like in a performance environment. The hoist system may be adapted with safety mechanisms including an overload sensor and/or a slack line detector. The system may be provided in the form of a point hoist. The compact system is highly scalable to a variety of spaces and applications, including school and public theaters and concert halls, as well as some homes, private business, etc. | 06-26-2014 |
20140183326 | HALLOWEEN PUMPKIN/JACK-O-LANTERN DISPLAY STAND - A Halloween pumpkin/jack-o-lantern stand having motorized platform able to rotate jack-o-lantern. A base with legs comprising of front display housing motion sensor which activates several functions including rotating platform, exterior profile lights, interior jack-o-lantern light, moving appendages and audible device. Jack-o-lantern is secured onto platform with extruding prongs. | 07-03-2014 |
20140197297 | BOOM SPRAYER AND BOOM RAISING AND LOWERING DEVICE - A boom raising and lowering device that is configured to raise and lower a boom includes a raising and lowering mount that is provided so as to be able to be raised and lowered with respective to the working vehicle, a roll mount that is provided on the raising and lowering mount so as to be rotatable in a roll direction and that supports the boom in a cantilever-supported manner, a first raising and lowering actuator that drives one end of the roll mount in the vertical direction with respective to the working vehicle, and a second raising and lowering actuator that drives other end of the roll mount in the vertical direction with respective to the working vehicle. The boom is driven in the vertical direction and roll direction by operating the first raising and lowering actuator and the second raising and lowering actuator. | 07-17-2014 |
20140209778 | Vibration isolator with coil spring - The invention relates to a vibration isolator that includes a coil spring. In a horizontal direction, the coil spring is rigidly connected to the base or to the load to be isolated. | 07-31-2014 |
20140209779 | Stationary vibration isolation system and method for controlling a vibration isolation system - The invention relates to a stationary vibration isolation system and to a method for controlling such a system which comprises a damper effective in a horizontal direction which includes a fluid of variable viscosity. | 07-31-2014 |
20140284445 | METHOD, SYSTEM, AND DEVICE FOR MANIPULATING A DETACHABLE OBJECT MOUNTED WITH UNRESTRICTED VIEWING FIELD - A method, system, and device for manipulating of surveillance cameras and the like mounted on top of utility poles. The system comprises: a multi-link articulating mechanism connected to a base, having a distal end, and configured to change positions of said distal end between over the base and cantilevered beyond the base; an object support connected to at least two links of the mechanism and configured to rotate from upright position with the distal end being over the base to upside down position with the distal end being cantilevered beyond the base; a winch mounted to the object support having a cable extended through said object support and configured for attaching the detachable object; and control means configured to manipulate the detachable object between being mounted upright and hanged by the cable at a predetermined height. | 09-25-2014 |
20140306086 | APPARATUS FOR SUPPORTING AND FOLLOWING MOVEMENT OF A PART OF PERSON'S BODY - An apparatus includes a brace being mounted on a person's body part and having a hard fitting surface. The apparatus also includes a load device, a support, a securing member, a brake, a switch device, and a soft film. The load device has a hard receiving surface receiving the fitting surface of the brace. The support movably supports the load device. The securing member secures the fitting surface to the receiving surface and enables the load device to move and follow movement of the person's body part and the brace against resistance applied from the support. The brake limits movement of the load device. The switch device switches operation modes of the apparatus, at least, between a free mode and a limiting mode. The soft film is arranged between the receiving and fitting surfaces for smooth movement of the person's body part on the load device in the limiting mode. | 10-16-2014 |
20140361141 | TRACKING SYSTEM - Tracking systems that allow a portable electronic device to record a target as it moves includes a holder for a portable electronic device, a tracking element coupled to the holder that follows or tracks a target as the target moves; and a positioning element coupled to the holder that pans and rotates as the tracking element tracks the object. Alternative configurations include a combination holder/positioning element, which is incorporated into the system. | 12-11-2014 |
20150014507 | VIBRATION ISOLATION APPARATUS, METHOD OF ISOLATING VIBRATION, LITHOGRAPHY APPARATUS, AND METHOD OF PRODUCING DEVICE - A vibration isolation apparatus includes a support unit that elastically supports an object to a mounting surface, a measurement sensor that measures a displacement of the object relative to the mounting surface, a drive unit that drives the object, and a storage unit. The storage unit stores data indicating a relationship between the displacement of the object and information that indicates a non-linear force produced by an elastic element including a support unit and that corresponds to the displacement. The drive unit drives the object in accordance with the displacement of the object and the data. | 01-15-2015 |
20150034795 | PNEUMATIC SUSPENSION AND VIBRATION ISOLATION SYSTEM EMPLOYING LOW FRICTION CABLE ISOLATORS - The present invention provides a suspension and vibration isolation system having cable isolators. The cable isolators employ low-friction air-bearing pneumatic cylinders and cables to isolate a suspended payload from vibrations of a carrier or to isolate the carrier from vibrations of the payload. Using such air-lubricated cylinder to piston interfaces virtually eliminates static friction and so improves the effectiveness of the isolation for small forces and displacement. The use of pneumatic cylinders also permits the system to be tuned to the required resonance frequency to isolate the payload from vibrations in a desired frequency band. | 02-05-2015 |
20150041616 | AUTOMATIC SENSING METHODS AND DEVICES FOR INVENTORY CONTROL - The present disclosure is generally directed to methods of tracking stocked inventory, such as products or other items stocked on a store shelf or other storage space. The disclosure is also directed to devices and systems that may be utilized to carry out such methods. | 02-12-2015 |
20150048233 | PORTABLE ELECTRONIC SUPPORT DEVICES - Portable electronic device stands for use with tablet computers, cellular phones, or other portable electronic devices are disclosed. One stand embodiment may include a base assembly which may include a plurality of retractable legs, a vertical axis assembly coupled to the base assembly and configured to store the base within, a horizontal axis assembly coupled to the vertical axis assembly, and an electronic device coupling assembly for removably attaching the electronic device to the stand. | 02-19-2015 |
20150069205 | Vibration isolation system with support divided into sections, and method for controlling same - The invention relates to a vibration isolation system which comprises a support divided into a plurality of rigid sections on which a displaceable stage is arranged. The sections are arranged on pneumatic bearings, and the pneumatic bearings of the individual sections are controlled independently from each other and based on the position of the displaceable stage. | 03-12-2015 |
20150097101 | DISPLAY LOCATION - A method and apparatus are disclosed for locating a display of a Self-Service Terminal (SST) at a desired viewing angle. The apparatus comprises a display support that supports a display of a Self-Service Terminal (SST) and that is pivotably mounted at an edge region thereof to the terminal; a variable length member that connects a further region of the display support to the terminal; and a motor that selectively varies the length of the member, the edge region and further region being spaced apart to tilt the display at a viewing angle responsive to the length of the variable length member. | 04-09-2015 |
20150102198 | Remote controlled moving platform for a camera - A moving platform for use with a camera and track assembly, and comprising a platform body having a hollow rectangular shape with five mirrored exterior sides and one open bottom side. Within and attached to the platform body is a drive wheel, an electric motor and a gear box adapted to drive the drive wheel, a non-drive wheel positioned and rotatable parallel to the drive wheel, a pair of directional wheels spaced from the drive wheel and the non-drive wheel, and a guide wheel assembly attached between the pair of directional wheels and including at least one caster wheel assembly adapted to roll within a recessed rail of a track assembly. | 04-16-2015 |
20150108319 | AGRICULTURAL ACCESS SYSTEMS AND METHODS - An agricultural access system is described. The system may utilize a plurality of supports, including posts, cables, beams, and so forth to displace an access component. Control systems, sensors, delivery mechanisms, and other functions may be integrated with the system or access components. Some embodiments may include multiple cells with access components configured to interact with adjacent access components. Methods of accessing an agricultural area are also disclosed. | 04-23-2015 |
20150108320 | AGRICULTURAL ACCESS SYSTEMS AND METHODS - An agricultural access system is described. The system may utilize a plurality of supports, including posts, cables, beams, and so forth to displace an access component. Control systems, sensors, delivery mechanisms, and other functions may be integrated with the system or access components. Some embodiments may include multiple cells with access components configured to interact with adjacent access components. Methods of accessing an agricultural area are also disclosed. | 04-23-2015 |
20150122967 | DRUM TYPE WASHING MACHINE AND TILTING METHOD OF THE SAME - Disclosed is a drum type washing machine, including a housing; a tub in the housing and having an opening; a drum in the tub; a rotary driving member in the housing configured to provide motive power to the drum and/or to rotate the drum; a tilting driving member between a side wall of the tub and the housing to provide the motive power to tilt the tub; and one or more damping members between the side wall of the tub and the housing to support the tub. The damping member(s) can be varied by tilting the tub. | 05-07-2015 |
20150129741 | ARM SUPPORT APPARATUS - In an arm support apparatus, a grippable member is connected to a longitudinal mount and is located such that a part of the grippable member is grippable by a hand of an arm when a part of the arm is mounted on the longitudinal mount. The hand is located to be closer to the first end of the longitudinal mount than to the second end of the longitudinal mount. A second limiter limits movement of the part of the arm mounted on the longitudinal mount in both a first direction and a second direction. The first direction is away from the second end of the longitudinal mount in the longitudinal direction. The second direction is parallel to the lateral width of the longitudinal mount and perpendicular to the longitudinal direction. | 05-14-2015 |
20150304487 | Transmission Line Measuring Device And Method For Connectivity - Disclosed herein is a suspension clamp connecting assembly. The suspension clamp connecting assembly includes a clamping unit, a support member, and a corona ring. The clamping unit includes a base section, extending arms, and clamp contact portions. The extending arms are between the clamp contact portions and the base section. The clamping unit is configured to clamp on to a suspension clamp. The support member has a first end and a second end. The first end of the support member is connected to the base section. The support member is configured to support an electronics housing. The corona ring is connected to the second end of the support member. | 10-22-2015 |
20150308537 | Instrumented Platform for Vibration-Sensitive Equipment - A platform that includes a vibration sensor located within an inner core of a table. The table may have a first plate that supports a vibration-sensitive payload. The first plate may be separated from a second plate by the inner core. The sensor can be located within the core directly below the device. The sensor can be connected to an electrical connector attached to an external surface of the table. A monitor can be readily plugged into the electrical connector to obtain vibration data from the sensor. The platform may also include a damper located within the inner core to reduce vibration of the table. The damper may be an active device that is connected to control circuits located within, or outside, the inner core. | 10-29-2015 |
20150335461 | MOTION ASSIST APPARATUS - The present invention provides a motion assist apparatus capable of reducing the discomfort of a user that may be caused when a motion is assisted. A motion assist apparatus | 11-26-2015 |
20150338019 | SPRING BALANCED SUPPORT DEVICE - A spring balanced support device having at least one arm, connected to its surroundings via a movable pivot point, forming an arm mechanism to which a mass may be coupled directly or indirectly at a mass coupling point, balanced by at least one spring, at one end directly or indirectly connected to the arm mechanism at a spring connection point, the other end directly or indirectly connected to the surroundings at a spring base point, wherein the spring base point is located substantially on an axis which extends through the movable pivot point and substantially parallel to a direction of a force exerted on the spring balanced support device at the mass coupling point due to the force of gravity on the mass, or wherein the spring base point is located at a distance from said axis along a line which intersects the axis and which extends substantially parallel to a pivot point axis of the movable pivot point, wherein the movable pivot point is movable along the axis in order to adjust the spring balanced support device. | 11-26-2015 |
20150342363 | Anti-pinch Device for an Electric Product - The invention provides an anti-pinch device for an electric product. The electric product comprises a fixing seat, a moving part which is movable to or away from the fixing seat, and a driving mechanism for driving the movement of the moving part relative to the fixing seat. The anti-pinch device comprises a safety strip and a controller electrically connected to the safety strip for controlling the operating state of the driving mechanism. An anomaly monitoring circuit is disposed in the safety strip, and the anomaly monitoring circuit comprises a power supply, a resistance and a normally open switch connected in series, the normally open switch is closable when the safety strip is pressed. The controller is connected to the anomaly monitoring circuit by electrical signals. the safety strip is fixedly disposed on the moving part or fixing seat and located between them. | 12-03-2015 |
20150360634 | APPARATUS AND METHODS FOR VEHICLE STRUCTURAL OR SEMI-STRUCTURAL COMPONENT ASSEMBLY ENABLING TUNABLE DECELERATION CHARACTERISTICS - A vehicle structural or semi-structural component assembly or crash sensor assembly includes a body, wherein a first portion of the body comprises a polymer composite material and a sensor mount portion of the body is connected to the first portion; and a sensor directly attached to the sensor mount portion. The sensor mount portion comprises a polymer composite material and a flexible reinforcement material over-molded within the polymer composite material. A method for enabling tunable deceleration characteristics in a vehicle structural or semi-structural component assembly includes forming a structural or semi-structural component for a vehicle from a polymer composite material; over-molding a flexible reinforcement material within the polymer composite material at one or more locations along the component; and attaching a sensor directly to at least one of the one or more locations. | 12-17-2015 |
20150374144 | DISPLAY SYSTEM - In an example embodiment, a system of lifting, lowering and rotating a display may include a housing, a rotator, and a hoist. The rotator may be configured to selectively rotate the housing such that a display functionally coupled to the housing is rotated. The rotator may include an anchor and a rotating portion. The anchor may be configured to be attached to an elevated surface. The rotating portion may be configured to be functionally coupled to the housing, and configured to rotate relative to the anchor. The hoist may include a member and a hoist motor. The hoist motor may be configured to selectively rotate the member such that a cable functionally coupled to the member is wound about the member when the member is rotated in a first direction, and the cable is unwound from the member when the member is rotated in a second direction. | 12-31-2015 |
20150375896 | Scissor Lift Pallet Lifter - A pallet lifter for raising and lowering a pallet. The pallet lifter includes a pallet platform, a lifting frame that supports the pallet platform, and a movement mechanism that controllably causes the pallet platform to raise and lower. The pallet platform includes a top surface designed to support a pallet, two side walls and a back wall. The lifting frame includes two sets of legs. One end of one or both of the two legs of each set of legs is moveable along a longitudinal axis of the pallet platform as the pallet platform is raised and lowered. The movement mechanism includes a motor and a threaded rod. The electric motor is designed to cause the threaded rod to rotate in a clockwise and counterclockwise direction to cause said pallet platform to raise and lower. | 12-31-2015 |
20160001685 | SUSPENSION SYSTEM FOR VEHICLES AND METHOD FOR FITTING VEHICLE PARTS WITH SUSPENSION - Suspension system for vehicle seats, in particular for utility motor vehicle seats, comprising at least a first and a second part, the two parts being mounted oscillatorily movable and spring-loaded with respect to one another, wherein a closed hydropneumatic circuit is provided which comprises at least one control element, connected to at least one of the two parts, and at least one first hydropneumatic spring connected in series therewith, a hydraulic pressure of a hydraulic medium in the circuit being convertible into a force acting between the two parts by means of an action surface arranged in the control element, the pressure being dependent on a gas pressure in a gas volume of the first spring. | 01-07-2016 |
20160014309 | GIMBAL SYSTEM WITH IMBALANCE COMPENSATION | 01-14-2016 |
20160023350 | Gravitational Load Support System - A load support device has a first link assembly coupled to a load and a first foot of a user. A first damping element is coupled to the first link assembly. The first damping element includes a double acting piston configured to provide uni-directional damping. A first sensor is disposed on a first limb of the user. A physical characteristic of the first limb is measured with the first sensor. A damping constant of the first damping element is selected based on the physical characteristic of the first limb. A second link assembly is coupled to the load and to a second foot of the user. A second damping element is coupled to the second link assembly between the load and the second foot. The load is alternately supported by the first link assembly and damping element and the second link assembly and damping element throughout a gait cycle. | 01-28-2016 |
20160031076 | Non-Anthropomorphic Hip Joint Locations for Exoskeletons - An exoskeleton device provides for selectively adjusting an exoskeleton hip pivot/pivot position in the sagittal plane relative to the position of the hip pivot of a wearer of the exoskeleton. The exoskeleton hip pivots/pivot positions can be shifted forward or rearward relative to the hip pivots of the wearer and can either be automatically actuated by an exoskeleton control system or manually adjusted by the exoskeleton wearer. The invention particularly allows for differential hip placement in order to compensate for changing load or actuation conditions. | 02-04-2016 |
20160037904 | COLLAPSIBLE POWER-DRIVEN TABLE STAND - A collapsible power-driven table stand includes a supporting body of an elongated shape, a first stand having a first driving member and a plurality of first extendable rods driven by the first driving member to move axially relative to each other and a second stand having a second driving member and a plurality of second extendable rods driven by the second driving member to move axially relative to each other. The first diving member is pivotally attached to one end of the supporting body and the second diving member is also pivotally attached to another end of the supporting body in order to allow both the first and second stands to extend/collapse relative to the supporting body. Accordingly, the assembly of the collapsible power-driven table is simplified and the overall size thereof is reduced. | 02-11-2016 |
20160045049 | BEVERAGE COASTER FOR VISUALLY IMPAIRED PERSON - A beverage coaster for a visually impaired person is provided. The beverage coaster for a visually impaired person includes a beverage coaster upper portion, a beverage coaster lower portion disposed to be spaced apart from the beverage coaster upper portion, an elastic member disposed between the beverage coaster upper portion and the beverage coaster lower portion to form an interval therebetween, a weight detecting unit detecting a weight of an object placed on the beverage coaster upper portion, and an audio unit outputting a sound in the case that a predetermined level of weight is detected by the weight detecting unit. | 02-18-2016 |
20160051042 | OPERATING DEVICE FOR AN ELECTRICALLY HEIGHT-ADJUSTABLE TABLE, ELECTRICALLY HEIGHT-ADJUSTABLE TABLE, DRIVE SYSTEM FOR AN ELECTRICALLY HEIGHT-ADJUSTABLE TABLE, AND METHOD FOR ADJUSTING THE HEIGHT OF A TABLETOP OF THE TABLE - An operating device is proposed for an electrically height-adjustable table having at least one electrical drive (EA) for adjusting the height of a table top (TP) of the table, and a controller (CTRL) for controlling the drive (EA). The operating device has an actuating element (BE, EMS, CS) to be arranged in the region of the table top (TP), a force sensor (FS), which is designed to measure a force acting on the table top (TP), and an evaluation circuit (EV). This circuit is designed to detect an actuation of the actuating element (BE, EMS, CS) during a height adjustment of the table top (TP), to receive measurement values from the force sensor (FS) within a predetermined period of time after the detected actuation, to determine a force alteration value from the received measurement values, and if the force alteration value is greater than a threshold value, to issue a control signal to the controller (CTRL) in order to initiate a height adjustment of the tabletop (TP) in a direction, depending on a sign of the force alteration value. | 02-25-2016 |
20160053939 | Bouncing Ornament - A bouncing ornament that includes housings a motor, a transmission mechanism and a transmission conduit The transmission mechanism transfers the motion of the motor to the ornament via a spring which causes the ornament to bounce up and down. | 02-25-2016 |
20160107309 | Soft Exosuit for Assistance with Human Motion - A motion control system includes an actuator having an actuation member, the actuation member having a proximal end attached to the actuator on a first side of a joint and a distal end attached to an anchor element attachment point on a second side of the joint. A first sensor is configured to output signals defining a gait cycle and a second sensor is configured to output signals representing a tensile force in the at least one actuation member. A controller receives the output signals from the sensors and actuates the actuator, during a first portion of the gait cycle, to apply a force greater than a predetermined threshold tensile force to the anchor element attachment point via the actuation member to generate a beneficial moment about the joint and to automatically actuate the actuator. | 04-21-2016 |
20160109057 | ANGULAR POSITIONING APPARATUS - An angular positioning apparatus that includes a wedge assembly and a rod assembly positioned generally within the wedge assembly. The wedge assembly can include a plurality of serially connected wedges, each separately rotatable and when rotated rotating the wedge or wedges, if any, above it. The rod assembly can be connected to the wedge assembly such that a distal end of the rod assembly has an operative pointing direction for a payload (an antenna, a camera, a laser or other angular sensitive device) mountable to a distal end of the apparatus) that is controllably movable by the wedge assembly and such that the rod assembly does not twist about a longitudinal axis thereof as the wedges are rotated. The rod assembly can form a hollow tube for wires and cables, or it can form a solid shaft. | 04-21-2016 |
20160116017 | POSITIONING APPARATUS MOUNTED WITH VIBRATION ISOLATORS AND ROBOT - A positioning apparatus mounted with at least one linear axis or axis of rotation and a robot on a base and mounted with vibration isolators and the robot includes vibration isolators that are capable of seating and suspending the base and a controller that controls suspension and seating of the vibration isolators in accordance with an operating condition of the robot. | 04-28-2016 |
20160128463 | COLLAPSIBLE POWER-DRIVEN TABLE STAND - A collapsible power-driven table stand includes a supporting body of an elongated shape, a first stand having a first driving member and a plurality of first extendable rods driven by the first driving member to move axially relative to each other and a second stand having a second driving member and a plurality of second extendable rods driven by the second driving member to move axially relative to each other. The first diving member is pivotally attached to one end of the supporting body and the second diving member is also pivotally attached to another end of the supporting body in order to allow both the first and second stands to extend/collapse relative to the supporting body. Accordingly, the assembly of the collapsible power-driven table is simplified and the overall size thereof is reduced. | 05-12-2016 |
20160158904 | MACHINE TOOL COMPRISING A LONGITUDINAL RAIL, A TRANSVERSE ARM, AND A MOTORIZED UNIT - A machine tool adapted to perform operations, in particular machining, on the surface of a part of large dimensions. The machine tool comprises a longitudinal rail and a transverse arm orthogonal to the longitudinal rail, fixed at a first end to slide on the longitudinal rail. A second end of the transverse arm is fitted with at least one motorized unit comprising at least one sucker allowing the unit to be held in position on the part during an operation. The unit is motorized and comprises a movement system for crawling over the part parallel to the longitudinal rail. The transverse arm carrying a tool is thus positioned precisely on the part. The unit is articulated relative to the transverse arm around a pivot of axis parallel to said transverse arm, in order to adapt to the curvature of the part along the longitudinal rail. | 06-09-2016 |
20160169313 | IMPROVEMENTS IN AND RELATING TO VIBRATION CONTROL | 06-16-2016 |