BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. Patent applications |
Patent application number | Title | Published |
20160142631 | PASSIVE INFRARED SEARCH AND TRACK SENSOR SYSTEM - A surveillance sensor system is described. The surveillance sensor system includes a polygonal-shaped assembly having four substantially identical quadrant segments. Each of the quadrant segments includes a first set of lens, a second set of lens, and a third set of lens. Images captured by the first, second and third sets of lens can be combined to form a telecentric image on an intermediate image plane. The surveillance sensor system also includes a relay optic module having a set of lens, multiple focal plane array detectors and a dewar. The relay optic module can re-image the telecentric image located on the intermediate image plane onto an image plane. | 05-19-2016 |
20160141826 | LIQUID CLADDING FOR MULTIPLE CLAD FIBER LASER - A laser system comprising a double clad or multiple clad fiber laser and methods of use are provided. The fiber laser may include a liquid cladding layer, which may be used to facilitate heat exchange. The liquid may be contained in a jacket and may be pumped out of the jacket as part of the heat exchange process. The liquid cladding layer may be used as a wave guide or an anti-wave guide. | 05-19-2016 |
20160140363 | PROGRAMMABLE UNIT FOR METADATA PROCESSING - A system and method for metadata processing that can be used to encode an arbitrary number of security policies for code running on a stored-program processor. This disclosure adds metadata to every word in the system and adds a metadata processing unit that works in parallel with data flow to enforce an arbitrary set of policies, such that metadata is unbounded and software programmable to be applicable to a wide range of metadata processing policies. This instant disclosure is applicable to a wide range of uses including safety, security, and synchronization. | 05-19-2016 |
20160139584 | OPTIMIZATION OF GIMBAL CONTROL LOOPS USING DYNAMICALLY MEASURED FRICTION - A method to slew a gimbal axis in an infrared countermeasures system (IRCM) comprising the steps of driving the motors up to the peak currents allowed by the servo amplifiers, moving the profile generator from firmware to software for design flexibility, forcing high torque by manipulating the angle waveform sent to hardware, measuring friction during acceleration of each slew, providing a dynamic rate limit for receding or advancing angle goals is presented in this application. | 05-19-2016 |
20160122153 | TENSION DEPENDENT BRAKE ACTUATION FOR CABLE MANAGEMENT AND DEPLOYMENT - A cable management system and method of use are provided in which brake actuation which controls a cable payout rate may be dependent on cable tension. A control system may be provided for adjusting cable tension and braking force. | 05-05-2016 |
20160099538 | PUMP RECYCLING INTEGRATED AMPLIFIER - A laser system and method of use are provided in which the laser system may include a fiber laser oscillator and rare earth doped piece of optical fiber which may absorb unused pump light which is unabsorbed in the oscillator. | 04-07-2016 |
20160036535 | HIGH EFFICIENCY COHERENT IMAGER - An extended field heterodyne detection apparatus comprises a local signal oscillator, a micro-lens array set in optical relation to the local signal oscillator to multiplex a beam from the local signal oscillator, a local oscillator injection lens in the optical path of the local oscillator and the micro-lens array, a semi-reflective beam splitter at the telecentric stop of the local oscillator injection lens to reflect the beam of the local oscillator in parallel to a signal beam passing through the semi-reflective beam splitter, an objective lens, with a stop, located at the semi-reflective beam splitter, and a focal plane array, situated to receive the source beam. The extended field heterodyne detection apparatus solves the problem of creating a local oscillator beam that is mode-matched for an incoming signal beam, for the eventual process of mixing both the signal beam and the local oscillator using a conventional, square-law detector. | 02-04-2016 |
20150316351 | SYSTEM AND METHOD FOR REMOVING AND REINSTALLING WEAPON SIGHT WITHOUT CHANGING BORESIGHT - A system and method for removing and reinstating a sight of a weapon without changing a boresight is disclosed. A reference optical device is installed on a rail of the weapon and then the sight is installed on the rail. An attitude determination unit determines a change in attitude of the sight with respect to the boresight. The aim point of the weapon in the sight is compensated accordingly based on the change in attitude without changing the boresight by utilizing a compensation module. This allows retaining the boresight even when the weapon sight is removed and reinstalled. Thus weapon sight can be mounted anywhere on a weapon without the need to boresight the weapon. | 11-05-2015 |
20150301154 | GAIN PROJECTION GEO-LOCATION SYSTEMS AND METHODS - A system and method for estimating the geographic location of an RF emitter which involves spatially filtering and receiving RF signals through use of a beamforming antenna array having multiple overlapping beams; detecting and measuring the time-of-arrival and amplitude of signals which are received in each beam through use of multiple synchronized receivers; identifying simultaneous detections of the same emitter which have occurred in adjacent beams; projecting the associated beamformed antenna gain patterns onto the underlying terrain for all instances in which there was a simultaneous detection in adjacent beams; weighting and accumulating all projections to form a Maximum Likelihood Surface (MLS); and finally, estimating the location of the emitter through analysis of the resulting MLS. | 10-22-2015 |
20150295744 | COMPANDERS FOR PAPR REDUCTION IN OFDM SIGNALS - A system and method use an inverse square root function (ISQR) function, in part, to compand and decompand signals. A system includes a companding processor and a transmitter. The companding processor compands input signals into companded signals using a compander function, C{x(n)}. The compander function compands the input signals based, at least in part, on an inverse square root (ISQR) function over at least a portion of a signal amplitude probability density function. The transmitter then transmits the companded signals as electromagnetic wave signals. | 10-15-2015 |
20150268329 | PASSIVE RANGING OF A TARGET - In an embodiment, an apparatus includes a detector and a range finder. The detector is configured to determine a direction to a target in response to a signal received from the target, and the range finder is configured to determine a range to the target in response to the direction and independently of an amplitude of the signal. For example, such an apparatus (e.g., a computer-based apparatus) may be disposed on tactical fighter aircraft, and may be able to range (e.g., azimuth range or slant range) a target passively even if an accurate measure of the amplitude of the signal received from the target is unavailable. | 09-24-2015 |
20150268300 | SYSTEM AND AUTOMATED METHOD FOR MIXED-SIGNAL CIRCUIT FUNCTIONAL ANALYSIS - A system and automated method for mixed-signal circuit functional analysis is disclosed. In one embodiment, the method includes identifying hierarchical levels of functional components in an inputted mixed-signal circuit based on netlist, property of an input signal and a design knowledge base. | 09-24-2015 |
20150226722 | Optical Trace Chemical Detection for Analysis of Latent Prints - A method for optical analysis of otherwise invisible latent prints on a wide variety of surfaces and trace chemicals contained within the oils of a print. The invention provides the capability to monitor absorption/reflection infrared bands that are unique to print oils and chemicals of interest that have long or short wave infrared signatures, such as explosives, inorganic oxidizers, drugs, environmental markers, and biomarkers. | 08-13-2015 |
20150222081 | WALK-OFF COMPENSATOR WITH TILT FUNCTION - Techniques and structure are disclosed for implementing a spatial walk-off compensation mechanism having an integral tilt function. In some embodiments, the mechanism may comprise a tilt-ball mount having an integrated walk-off compensation medium. In some embodiments, the mechanism may be configured to receive an output beam from a non-linear converter (e.g., optical parametric oscillator or OPO) implementing a non-linear medium comprising a bi-refringent material (e.g., zinc germanium phosphide, or ZaGeP | 08-06-2015 |
20150222080 | WALK-OFF COMPENSATOR WITH TILT FUNCTION - Techniques and structure are disclosed for implementing a spatial walk-off compensation mechanism having an integral tilt function. In some embodiments, the mechanism may comprise a tilt-ball mount having an integrated walk-off compensation medium. In some embodiments, the mechanism may be configured to receive an output beam from a non-linear converter (e.g., optical parametric oscillator or OPO) implementing a non-linear medium comprising a bi-refringent material (e.g., zinc germanium phosphide, or ZnGeP | 08-06-2015 |
20150180760 | NETWORK TEST SYSTEM - A network test system seeks to improve visibility into the real-time operation of a network system or subsystem of a spacecraft through the use of a port from each relevant network to a spacecraft test interface. The network test system includes a packet switch operatively coupled downstream from a SERDES receiver and operatively coupled upstream from a SERDES transmitter. The packet switch in conjunction with the signal replicator in the SERDES receiver taps off a data stream of the network activity so that the port allows an observation device to passively observe the network activity. The system is adapted to increase real-time observation of network activity without disturbing the network. | 06-25-2015 |
20150145950 | MULTI FIELD-OF-VIEW MULTI SENSOR ELECTRO-OPTICAL FUSION-ZOOM CAMERA - A system and method for creating an image is presented. The system includes a first camera, a second camera, and a fusion processor. The first camera has a small field-of-view (FOV) and an optical line of sight (LOS). The second camera has a large FOV that is larger than the small FOV and the second camera has an optical LOS. The first camera and second camera are mounted so that the optical LOS of the first camera is parallel to the optical LOS of the second camera. The fusion processor fuses a second image captured by the second camera with a first image captured by the first camera. The fused image has better resolution in a fused portion of the fused image than in unfused portion of the fused image. | 05-28-2015 |
20150139560 | CODED IMAGE SYSTEM AND METHOD THEREOF - A coded image system enables a user to recover an object scene from an encoded image. The coded the image system comprises: a physical object scene; an encoding logic creating an encoded image, the encoding logic including a programmable aperture mask spaced a distance away from the physical object scene to encode the encoded image via a doubly-Toeplitz matrix, the doubly-Toeplitz matrix including two one-dimensional vectors; and a decoding logic operatively coupled to the programmable aperture mask to decode the encoded image recovering a visual representation of the object scene from the encoded image. | 05-21-2015 |
20150120898 | POLICY MANAGED SYSTEM AND METHOD THEREOF - A method and a system of managing a policy managed system that includes a policy managed element. The method restricts the policy managed element so that internal configurations and actions of the policy managed element do not violate any policy rules generated external to the policy managed element. The method also prevents the policy managed element from generating policy that exit the policy managed element. The method, at a policy executive element (PEE) located remote from the policy managed element, restricts internal configurations and actions of the PEE so that the PEE does not violate any policy rules generated external to the PEE. The PEE includes a policy generation point (PGP) that the method allows to generate new policy rules that do not violate any existing policy and provides the new policy rules to the policy managed element. | 04-30-2015 |
20150112603 | MOBILE DEVICE BASED GAIT BIOMETRICS - A system and method for identifying an individual based, at least in part, on their gait is presented. First, acceleration data is received from an accelerometer carried by a person. The acceleration data corresponds to a gait of the person. Rotational invariant values that are independent of a rotational position of the accelerometer are calculated based, at least in part, on the acceleration data. A gait dynamics image (GDI) is calculated based, at least in part, on the rotational invariant values. The GDI is matched to one of a set predetermined GDIs to identify the person. | 04-23-2015 |
20150061565 | METHOD AND APPARATUS FOR IMPROVING GIMBAL STABILITY - Enhanced stability for infrared countermeasure systems is provided by using a pair of single axis rate sensors having orthogonal active axes, preferably aligned with the elevation axis and the azimuth axis of the gimbal. The outputs of the orthogonal single axis rate sensors are used to detect instantaneous aircraft angular movement and to use the detected movement to drive the elevation and azimuth motors of the gimbal to move the output mirror for the gimbal to cancel the detected movement. | 03-05-2015 |
20140290038 | METHOD FOR IMPLEMENTING PROMPT DOSE MITIGATING CAPACITOR - A method for implementing a prompt dose mitigating capacitor is disclosed. Initially, a flip chip is provided with multiple capacitors. The flip chip is then placed on top of a substrate having multiple electronic devices connected to a set of power rails. The terminals of the capacitors within the flip chip are subsequently connected to the power rails within the substrate in order to regulate voltages appeared on the power rails during a radiation pulse. | 10-02-2014 |
20140270663 | VIBRATION DAMPER FOR HIGH POWER FIBER OPTIC TRANSPORT CABLES - Embodiments of a method and apparatus for controlling the mechanical stabilization of an optical fiber are disclosed. The method may consist of placing an inflatable bladder between an optical fiber and a protective jacket. The bladder may be inflated with air, inert gas, or liquid to a desired pressure. The bladder may be sectioned to extend along part of or the entire length of the fiber. The bladder may isolate the optical fiber in a periodic fashion. The temperature of the material inside the bladder may vary axially along the optical fiber. Embodiments of the invention can stabilize the optical fiber by providing mechanical isolation from vibration and other perturbations. Embodiments of the invention can also alter Stimulated Brillouin Scattering (“SBS”) and Stimulated Raman Scattering (“SRS”) thresholds using either thermal or vibrational perturbations. | 09-18-2014 |
20140253381 | HIGH DEGREE OF FREEDOM ARRAY - An array of elements suitable for adaptive processing in an extreme jammed environment comprised of a plurality of smaller sub-arrays of element clusters that have natural orthogonal spatial modes of excitation, wherein the improvement comprises sub-arrays with spatial orthogonality of feed modes, cross-sub-array combination to maximize pre-processing sub-array spacing and diversity of relative configuration, a high-input analog nuller used on the pre-processing sub-array therein, a high-input analog nuller is used to null a dominant jamming signal, possibly exceeding normal communication signal levels, so that the sub-array processed signals could then be fed to an antenna processor with simultaneous beam steering and null steering. | 09-11-2014 |
20140251134 | SUPERADSORBENT MATERIAL SYSTEM FOR IMPROVED FILTRATION APPLICATIONS - The present invention involves the use of nanoporous carbons derived from partially or fully demetalized metal carbides in personal protection equipment for the irreversible absorption/adsorption of both broad and specific targeted gases. These materials have been specifically processed to provide enhanced effective loadings against specific harmful volatile organic compounds. | 09-11-2014 |
20140242743 | SENSOR INTEGRATED SLIT FOR PUSHBROOM HYPERSPECTRAL SYSTEM - An entry slit panel for a push-broom hyperspectral camera is formed at least partly from a silicon wafer on which at least one companion sensor is fabricated, whereby the companion sensor is co-planar with the slit and detects light imaged on the panel but not on the slit. In embodiments, the companion sensor is a panchromatic sensor or a sensor that detects light outside the wavelength range of the camera. At least a region of the wafer is back-thinned to a thickness appropriate for a diffraction slit. The slit can be etched or laser cut through the thinned region, or formed between the wafer and another wafer or a conventional blade. The wafer can be back-coated or metalized to ensure its opacity across the camera's wavelength range. The companion sensor can be located relative to the slit to detect scene features immediately before or after the hyperspectral camera. | 08-28-2014 |
20140233895 | FIBER-OPTIC CONNECTOR - A fiber-optic connector for connecting an optical fiber to other optical assemblies is disclosed. The fiber-optic connector includes a top plate having a window of similar refractive index and transmission index as the material of an optic fiber to be contained within the fiber-optic connector. The fiber-optic connector also includes a ferrule connected to the top plate via multiple spring-loaded screws. The ferrule includes an interface and an insert. The insert is capable of firmly gripping an optical fiber. In order to reduce Fresnel reflection losses of the fiber-optic connector, the window is pre-coated with an anti-reflective surface on the side opposite an optic fiber to be contained within the fiber-optic connector. | 08-21-2014 |
20140231578 | STABILIZED UAV PLATFORM WITH FUSED IR AND VISIBLE IMAGERY - Embodiments of the present invention relate to an unmanned aerial vehicle (UAV) and a method of use. The UAV may comprise a UAV platform designed around a sensor system. The UAV platform may adjust itself in order to stabilize the sensor system. The UAV platform may comprise front UAV wings, back UAV wings, and a payload chamber. The front UAV wings and back UAV wings may adjust themselves by rotating about a line approximately perpendicular to the UAV's flight line. The payload chamber may adjust itself by rotating about the UAV's flight line. The sensor system may be located in an optimal location on the UAV platform, for example, behind the nose as far back as the front UAV wings. The sensor system may comprise an infrared (IR) and a visible camera. | 08-21-2014 |
20140222397 | FRONT-END SIGNAL GENERATOR FOR HARDWARE IN-THE-LOOP SIMULATION - A front-end signal generator for hardware-in-the-loop simulators of a simulated missile is disclosed. The front-end signal generator is driven by the Digital Scene And Reticle Simulation-Hardware In The Loop (DSARS-HITL) simulator. The simulator utilizes a computer to calculate irradiance on an Electro-Optical/Infrared (EO/IR) detector. The generator converts irradiance values into voltages that are injected into the missile's electronics during simulation. The conversion is done with low latency and a high dynamic range sufficient for hardware-in-the-loop simulation. The generator is capable of emulating laser pulse inputs that would be present during laser-based jammer countermeasures. Computer control of the generator occurs via front-panel-data-port (FPDP). | 08-07-2014 |
20140206309 | METHOD AND APPARATUS FOR PERSISTENT COMMUNICATIONS, INTEROPERABILITY AND SITUATIONAL AWARENESS IN THE AFTERMATH OF A DISASTER - A system for providing situational awareness outside a temporary incident area network includes a prioritized connection module for connecting a mesh network at the incident area to one of a plurality of available communications channels, with the selection based not only on the availability of a communications channel but also on the associated expense, speed, reliability or bandwidth, so that high bandwidth traffic such as video and pictures can be reliably sent from the incident area to a location outside of the incident area. In one embodiment switching to a satellite phone network bypasses problems with terrestrial networks such as cell phone networks and landlines which may be down. | 07-24-2014 |
20140206153 | METHOD FOR FABRICATING SOLDER COLUMNS FOR A COLUMN GRID ARRAY PACKAGE - A method for fabricating an electronic device package having a column grid array is disclosed. A column grid array package includes a substrate, an integrated circuit located on a first side of the substrate, and a set of solder columns located on a second side of the substrate. The column grid array package also includes multiple two-tab electronic devices located on the second side of the substrate. The heights of the two-tab electronic devices are substantially identical to the heights of the solder columns. | 07-24-2014 |
20140192507 | LIGHTNING PROTECTION AND ENHANCED EMI SHIELDING FOR FACETED DOMES - A faceted dome assembly for airborne optical sensors to enhance EMI shielding and lightning protection is disclosed. In one embodiment, the faceted dome assembly includes a faceted dome. An optical sensor and a gimbal are housed in the faceted dome. Further, a conductor is disposed substantially in the facets of the faceted dome to provide the enhanced electromagnetic shielding and lightning protection. | 07-10-2014 |
20140185869 | SCENE CORRELATION - A method for maintaining north comprising the steps of locating north with a north finding gyroscope, tying north to a feature in a scene, correlating the feature to a target in the field of regard of a plurality of cameras, and determining a north factor and translating the north factor into a target vector relative to north. | 07-03-2014 |
20140185119 | ULTRA WIDE BAND ACHROMATIC RISLEY PRISM SCANNER - A system and method for scanning a wide band beam is presented. An apparatus includes a pair of prism triplets. Each prism triplet includes a first wedge prism, a second wedge prism and a third wedge prism all formed with different optical materials. In operation, a beam passing through the wide band team scanning apparatus first passes through the first, second and third wedge prisms of the first prism triplet. The beam then passes through the wedge prisms of the second prism triplet in a mirrored order (the third, then second, then first wedge prisms) than that of the first prism triplet. This apparatus with two prism triplets allows wide band light transmitted through it to emerge with its plurality of different wavelengths of light travelling in the same direction to equalize net dispersive effects each of different wavelengths. | 07-03-2014 |
20140175675 | DEVICES AND METHODS FOR STACKING INDIVIDUALLY TESTED DEVICES TO FORM MULTI-CHIP ELECTRONIC MODULES - A method for manufacturing an electronic multi-chip module that involves stacking at least six tested devices to form the module. These devices may be individually tested prior to assembling the electronic module. After individually testing the devices, the devices may be stacked one on top of the other to form an electronic multi-chip module having at least six stacked devices. Other embodiments may be described and claimed. | 06-26-2014 |
20140166905 | Semiconductor IR Lamp Replacement Providing Bands IV, II and Band I Protection For Staring Infrared Countermeasures System - In a staring infrared countermeasures system, wherein the improvement comprises a semiconductor material emitter for providing a specific infrared wavelength to provide protection against an infrared radiation guided missile. | 06-19-2014 |
20140147507 | CARBIDE-DERIVED-CARBON-BASED OXYGEN CARRIERS - An oxygen delivery system is disclosed. The basis of the oxygen deliver system is a carbide-derived carbon (CDC). The CDC can be tuned to carry O | 05-29-2014 |
20140135516 | Nanostructure having metal nanoparticles and method of assembly thereof - A nanostructure and method for assembly thereof are disclosed. An exemplary nanostructure includes a photocatalytic nanoparticle; a first tier of metal nanoparticles, each metal nanoparticle of the first tier being linked about the photocatalytic nanoparticle; and a second tier of metal nanoparticles, each metal nanoparticle of the second tier being linked to one of the metal nanoparticles of the first tier and located a distance from the photocatalytic nanoparticle greater than a distance between a metal nanoparticle of the first tier and the photocatalytic nanoparticle. | 05-15-2014 |
20140114528 | PORTABLE MAINTENANCE AID BASED PRELOAD TEST UNIT AND STRAY VOLTAGE DETECTOR - A Portable Maintenance Aid (PMA) having multiple applications for the electrical testing and data acquisition for various air/ground vehicle platforms is disclosed. The PMA includes an interface adapter that has a number of electrical testing interfaces and data collection ports in addition to a stray voltage detector. The portable testing aid also includes a user interface that transmits data to the interface adapter and a display that communicates the testing and maintenance information to the user. The portable testing aid also includes a communication system for transferring information between the user interface, the display, and the interface adapter. The PMA provides a preload tester/stray voltage tester that is sustainable, less replaceable and has capability of filling the test voids. | 04-24-2014 |
20140107970 | GEOLOCATION USING HIGH ORDER STATISTICS - A specific emitter identification (SEI) method and apparatus is capable of identifying and tracking objects within a geographical area of interest wherein the system and method has not been preprogrammed to look for particular signals. The system and method receives all of the emitted electromagnetic signals emitted from area of interest. The system and method next performs high order statistical analysis on the received signals and determines which signals emanate from possible targets of interest and which likely emanate from background clutter/noise by comparing the relative degrees of Gaussianness of the signals (for example using entropy measurements). The least Gaussian signals are deemed to likely be signals from potential targets of interest while those which are more Gaussian are deemed to be likely from background clutter or noise. | 04-17-2014 |
20140099823 | STACKING CONNECTOR FOR MILITARY APPLICATIONS - An electrical connector assembly adapted for military use comprising a high density maintenance connector which supports high bandwidth video export and low level maintenance functions, a lower density I/O connector, the stacking feature allows multiple branches in an ad hoc distribution center, custom to each user, and the programmability allows for identical cables/stacking connectors to be used in different configurations. | 04-10-2014 |
20140096907 | SYSTEM AND METHOD FOR MICROELECTRONICS LAMINATION PRESS - The system contains a lamination press. The first cavity is formed in a chassis. A film assembly is fitted within the chassis. A buffer mounts over the film assembly and within the chassis. A tool set is shaped to fit within the first cavity. The tool set and chassis are positioned within the lamination press to confer heat and pressure from the lamination press to the film assembly and chassis. | 04-10-2014 |
20140092255 | AUTO CORRELATION BETWEEN CAMERA BANDS - A method for correlating an image to align two sensors comprising the steps of centering an imaging unit on a landmark that provides good contrast and distinct edges so as to provide a scene, taking a snapshot of the scene from both sensors, applying a Sobel edge filter to the image from both sensors to create two strong edge maps, cropping a small block of one image centered about the landmark and cross-correlating it on a larger region centered on an expected position of the landmark in the other image, and from the position of the strongest correlation peak determining the position of the center of the block from the first image, providing the difference in the alignment of the two sensors. | 04-03-2014 |
20140078294 | SYSTEM AND METHOD FOR REAL TIME REGISTRATION OF IMAGES - A system and method for real time registration of images is disclosed. The system measures the angle rate of change and approximates attitude difference between the two cameras to provide an estimate of the relative rate of change between the two cameras. Approximating attitude difference between the two cameras reduce the time needed for initial image registration. Real time registration of images reduces the processing load and improves tracking. | 03-20-2014 |
20140072260 | Optical Multiplexer/Demultiplexer - An apparatus for optical spectrometry utilizes a simplified construction, reducing the number of independent optical elements needed while providing a sizeable dispersed spectrum. The apparatus provides a spectral intensity distribution of an input source wherein individual spectral components in the source can be measured and, in some embodiments, can be manipulated or filtered. | 03-13-2014 |
20140071294 | FACE MOUNTED EXTREME ENVIRONMENT THERMAL SENSOR SYSTEM - A system for the display of thermal imaging data is provided with a hands free thermal imaging camera; a transparent display directly coupled to said thermal imaging camera; a head mounted lens; the display being integrated into the head mounted lens in front of at least one eye of a user. | 03-13-2014 |
20140059830 | HYPERBOLIC METAMATERIALS AS DISTRIBUTED BRAGG MIRRORS FOR HIGH POWER VCSEL DEVICES - Implementing a layered hyperbolic metamaterial in a vertical cavity surface emitting laser (VCSEL) to improve thermal conductivity and thermal dissipation thereby stabilizing optical performance. Improvement in the thermal management and power is expected by replacing the distributed Bragg reflector (DBR) mirrors in the VCSEL. The layered metamaterial structure performs the dual function of the DBR and the heat spreader at the same time. | 03-06-2014 |
20140052959 | Experimental engineering optimization algorithm at point of performance - A method is provided for reducing the data set used in creating an optimization algorithm, thus to permit the use of microprocessors, that in turn permits embedding the optimization algorithm at the point of performance, in which a subset of data points in a performance window is used to derive a vector that is utilized to create an initial optimization algorithm. | 02-20-2014 |
20140052677 | Nearly orthogonal latin hypercubes for optimization algorithms - Nearly orthogonal latin hypercubes are used in optimization algorithms for creating an expanded and synthetically-generated data set to improve an initial optimization algorithm. | 02-20-2014 |
20140052418 | Method and apparatus for providing on-board diagnostics - On-board diagnostics for fleet maintenance is improved by embedding a microprocessor programmed with a prognostication algorithm on a vehicle. | 02-20-2014 |
20140050081 | Reduced bandwidth transmission for multiple sensors utilized to monitor a system - In a system for monitoring multiple sensors, a technique is utilized to reduce the bandwidth necessary to transmit sensor data to a processing location by embedding a diagnostic and/or prognostic algorithm at the sensor location and providing that the algorithm outputs only values that are greater than predetermined exceedances for each of the sensors involved, and by monitoring only performance parameters that are critical to the monitored system. | 02-20-2014 |
20140049392 | Method of preventing spoilage - A method is provided for preventing spoilage of perishable goods by utilizing algorithms that predict the probability of spoilage based on sensor inputs, in which containers are provided with one or more spoilage sensors that are output to a prognostic or detection algorithm for providing the probability that spoilage has occurred or the probability that spoilage will occur at some specific time in the future. | 02-20-2014 |
20140046640 | Telenostics for medical uses - Telenostics style prognostication algorithms are used in medical prognosis to predict the mean time to an unacceptable result, such as death, or the mean time to a cure or partial cure. | 02-13-2014 |
20140042376 | NANOSTRUCTURE HAVING METAL NANOPARTICLES AND A METHOD OF ASSEMBLY THEREOF - A nanostructure and method for assembly thereof are disclosed. The nanostructure includes a gain medium nanoparticle; an output coupler nanoparticle being discrete from and linked to the gain medium nanoparticle; and a plurality of metal nanoparticles being linked about the gain medium nanoparticle, wherein the gain medium nanoparticle and the output coupler nanoparticle are included in the nanostructure in a one to one ratio. | 02-13-2014 |
20140038541 | Link 16-Based Geolocation Of Hostile Jammers - A method for Link 16-based geolocation of hostile jammers comprising the steps of collecting jamming noise I/Q samples at a plurality of locations, determining the relative time delay of reception between two or more of the locations, determining the first derivative of the time delay of reception between the two or more locations, and using the results calculated in the preceding step to determine the position of the hostile jammers. | 02-06-2014 |
20140036103 | Visual Communications System Employing Video Imagery - A system and method for platform independent LOS visual information transmission is disclosed. A transmitter consists of a series of sequential images that are stacked together to form frames in a video transmission. Each image is modulated spatially, by color, and by intensity. The data is transmitted over an LOS visual channel. The receiver first captures each individual image from the received video, and then demodulates each image in the three areas it was modulated spatially, by color, and by intensity. LOS visual information transmission allows for secure data transfer and reduces interference from other applications. | 02-06-2014 |
20140035695 | FREQUENCY AGILE HIGH POWER MICROWAVE GENERATOR - A Multi-Cycle Digital High Power Microwave (MCD-HPM) source includes a microwave transmission line (MTL) to which a plurality electrically charged thin film transmission lines (TFTL's) are connected by switches. The switches are activated in sequence to generate a square wave at a microwave output frequency. The activation signal is controlled by a free space time delay, which can vary the timing and/or routing of the activation signal by modifying at least one free space element, thereby adjusting the switch activation timing and varying the output frequency. In embodiments, the switches are photo-conducting switches, the activation signal is a laser beam, and the switch timing is varied by reorienting and/or repositioning mirrors and/or other elements in the free space time delay. The elements can be manually adjusted, or mounted on motorized stages and automatically controlled. Optical amplifiers can be included to compensate for losses in the time delay elements. | 02-06-2014 |
20140034813 | CORNER CUBE ENHANCED PHOTOCATHODE - Techniques are disclosed for improving the quantum efficiency of photocathode devices. The techniques allow for an increase in the optical thickness of the photocathode device, while simultaneously allowing for an increase in the probability of electron escape into the vacuum of the device. The techniques are particularly useful in detector and imaging. In one embodiment, a photocathode device is provided that has an array of corner cubes fabricated in a surface of the photocathode. The corner cube array is made of the same material as the photocathode layer. The device may be, for example, a detector or image intensifier that operates in the UV, visible, and IR light spectrums, and may further include a gain medium, anode, and readout device. Techniques for forming the device are also provided. | 02-06-2014 |
20140029892 | IN-LINE GERMANIUM AVALANCHE PHOTODETECTOR - A method for manufacturing a photodetector including growing a quantity of germanium within an optical pathway of a waveguide. The detection of a current caused by an interaction between the optical signal and the germanium is used to indicate the presence of an optical signal passing through the waveguide. | 01-30-2014 |
20140029470 | Topology Aware MANET For Mobile Networks - Systems and methods provide adaptability in a mobile ad hoc network (MANET), based on an existing protocol, such as adaptive hybrid domain routing (AHDR). The systems and methods are especially suited for fast changing topologies that may change after a reactive route discovery has been completed. | 01-30-2014 |
20140021508 | Thyristor-Based, Dual-Polarity Blocking Photo-Conductive Semiconductor Switch (PCSS) For Short Pulse Switching And Methods - A system and method utilizing thyristor-based Photo-Conductive Semiconductor Switches (PCSS) for short pulse switching in high power microwave and/or broadband electromagnetic pulse generation is disclosed. The PCSS consists of thyristor-type NPNP structure having multiple emitter regions enclosed by the base region and multiple emitter shorts to divert leakage currents for voltage holding. The PCSS also includes an optical aperture comprised of patterned metallic grids for light illumination and current collection. The device structure is so constructed that there is only one single bevel around the peripheral. The thyristor-based PCSS have dual polarities of voltage blocking and have better efficiency for light requirement to operate at longer pulse duration compared to diode-based and bulk-semiconductor-based PCSS. | 01-23-2014 |
20140021380 | SINGLE APERTURE COAXIAL THREE CHANNEL OPTICAL SYSTEM - A single aperture three channel optical system is disclosed. In one embodiment, the optical system includes a front optical group and a back optical group that is disposed in substantially close proximity to the front optical group. Further, the optical system includes a first sensor, a second sensor, and a third sensor. The front optical group and the second optical group receives an object beam and splits into a reflected beam having first wavelengths and a transmitted beam of second wavelengths. Furthermore, the front optical group and the second optical group splits the reflected beam having first wavelengths into a transmitted beam having third wavelengths and a reflected beam having fourth wavelengths. The first sensor, the second sensor and the third sensor receive the transmitted beam of second wavelengths, transmitted beam of third wavelengths, and reflected beam of fourth wavelengths, respectively and produce the coaxial three channel images. | 01-23-2014 |
20140020447 | TRACE ANALYTE EXTRACTION USING ADSORPTIVE CARBIDE-DERIVED NANOPOROUS CARBON POWDERS - In the method of latent print analysis, wherein the improvement comprises using an ultra-fine, nanoporous carbon material as an adsorptive powder to identify trace chemicals found within oils of a print. | 01-23-2014 |
20140017872 | METHOD FOR FABRICATING A METAL-INSULATOR-METAL CAPACITOR - A method for fabricating a metal-insulator-metal capacitor (MIMCap) is disclosed. A first metal layer is provided on top of an oxide layer. A nitride layer is then deposited on the first metal layer. The nitride layer and the first metal layer are etched to form a MIMCap metal layer. The gaps among the MIMCap metal layer are filled with a plasma oxide, and the excess plasma oxide is polished using the nitride layer a polish stop. After removing the nitride layer, a dielectric layer and a second metal layer are deposited on the MIMCap metal layer. Finally, the dielectric layer and the second metal layer are etched to form a set of MIMCap structures. | 01-16-2014 |
20140015732 | Card Guide And Cap Antenna Retention System - Embodiments of the present invention relate to a structure and method for providing better antenna element retention in the any environment. The structure may comprise at least two card guides attached to a base. Each card guide may have at least one antenna slot, and individual antenna elements may be guided into position by an antenna slot of two different card guides. The individual antenna elements may have their freedom of motion restricted in the direction of their insertion by caps attached to the card guides. The individual antenna elements may have their freedom of motion restricted in a direction transverse to their direction of insertion by retention members attached to the card guides. By allowing for the “top-down” assembly of individual antenna elements in a modular fashion, embodiments of the present invention may facilitate easier repair of antenna element arrays, than prior art array assemblies. | 01-16-2014 |
20140015098 | METHOD FOR FABRICATING SOLDER COLUMNS FOR A COLUMN GRID ARRAY PACKAGE - A method for fabricating an electronic device package having a column grid array is disclosed. A column grid array package includes a substrate, an integrated circuit located on a first side of the substrate, and a set of solder columns located on a second side of the substrate. The column grid array package also includes multiple two-tab electronic devices located on the second side of the substrate. The heights of the two-tab electronic devices are substantially identical to the heights of the solder columns. | 01-16-2014 |
20140010497 | Generating Broadband Spectral Power In Multimode Optical Fibers - A broadband spectral power generator in a multimode optical fiber utilizes a standard multimode fiber that is coiled. A plate is placed on the coiled fiber and a force is applied to compresses the coiled fiber and thereby increase the interactions between the compressed windings and induce modal mixing and birefringence in the fiber. In addition, the compression causes additional non-linear processes to be excited and occur in the compressed fiber coil to generate more broadband light. This allows for better “mixing” of the spatial beam in the multimode fiber coil and allows for the various modes to overlap. The multimode fiber coil is made of silica, silicate, germinate, phosphate, fluoride, chalcogenide, or telluride. The compressed coiled fiber may be driven by a laser providing more than one wavelength output and this greatly increases the amount of nonlinear mixing in the fiber for a greatly enhanced spectral coverage. | 01-09-2014 |
20140010406 | METHOD OF POINT SOURCE TARGET DETECTION FOR MULTISPECTRAL IMAGING - A method of point source target detection for multispectral imaging is disclosed. In one embodiment, a background source spectral ratio is determined using at least one radiant source, such as baseline intensities, camera optics sensitivity properties and atmospheric transmission properties. Further, a spectral difference is computed for each pixel in an incoming frame by applying the background source spectral ratio to a spectral band-specific radiant intensity value of each pixel. Furthermore, offset biasing in the incoming frame is removed by applying spatial median filtering to each computed spectral difference in the incoming frame. | 01-09-2014 |
20140003780 | Passive Periodic-Slot Waveguide As An Optical Filter And Phase Reference | 01-02-2014 |
20130342361 | DEVICE FOR ESTABLISHING COMMUNICATIONS INTEROPERABILITY AT AN INCIDENT SITE INCLUDING MEANS FOR RECORDING CRISIS INCIDENTS - What is provided is recording capability for each of the modules utilized by the first responders and other personnel within the area of the incident, with the stored information at each of the first responders' modules being read out through the ad hoc network, where it can be uploaded to storage. The stored information can be displayed at an incident commander work station in real time to give the incident commander a realistic view of the timeline and the severity of the incident, as well as the response. The use of the ad hoc network permits offloading stored information from each of the first responders' modules so as to free up storage within the modules. By providing storage at every node of the ad hoc network, one has access to a timeline of the actions at the incident as well as redundancy, which enhances the memories and observational skills of the first responders. Incident reporting is made complete due to the fact of all recordings being: made available at one node on the temporary ad hoc network from which information reports and analysis can proceed, as well as subsequent training. | 12-26-2013 |
20130341644 | METHOD AND DESIGN OF AN RF THRU-VIA INTERCONNECT - In summary, a vertical metalized transition in the form of a via goes from the back side of a high thermal conductivity substrate and through any semiconductor layers thereon to a patterned metalized strip, with the substrate having a patterned metalized layer on the back side that is provided with a keep away zone dimensioned to provide impedance matching for RF energy coupled through the substrate to the semiconductor device while at the same time permitting the heat generated by the semiconductor device to flow through the high thermal conductivity substrate, through the back side of the substrate and to a beat sink. | 12-26-2013 |
20130335812 | EFFICIENT EXTENDED SHIFT MONOLITHIC RAMAN FIBER LASER - A system and method for producing Stimulated Raman Scattering (SRS) is disclosed. A single optical fiber or Raman oscillator is optically pumped by a pump laser of sufficient power to generate SRS to generate several Stokes shifts of energy. This generates a multi-wavelength output or a single wavelength with several stokes energy shifts from the pump wavelength. A selective, monolithic-coated Raman fiber oscillator laser is utilized to increase the efficiency of frequency shifting by providing frequency-specific feedback at both facets of a free space coupled optical fiber oscillator. Frequencies that lie several bands away from the primary pump frequency may be efficiently achieved in a fiber oscillator by re-circulating the required stokes-shifted frequencies via selective high-reflection coatings. By re-circulating the intra-band stokes frequencies, the required intensities in each respective frequency will be increased, thereby dropping the respective Raman threshold in the optical fiber. | 12-19-2013 |
20130328718 | SINGLE RECEIVER GPS POINTING VECTOR SENSING - A system and method of determining a pointing vector using two GPS antennas and a single GPS receiver is disclosed. Two stationary GPS antennas, with a separation preferably less than half of a wavelength (˜100 mm) may use a single receiver to determine the pointing vector of the system. Incorporation of a three axis angular rate measurement allows pointing determination during system rotation. Incorporation of three axis gyroscope system allows pointing determination while in motion. The system provides the ability to sense multipath and jamming. Also the system can potentially eliminate the impact and certainly alert the user that the measurement may not be reliable. | 12-12-2013 |
20130322470 | HIGHLY EFFICIENT THULIUM DOPED FIBER LASER - In the method of generating high power light with high efficiency and low thermal loading, the improvement comprising the steps of resonantly pumping a first thulium-doped fiber laser with a second thulium-doped fiber last, said second thulium-doped fiber laser having a shorter wavelength than said first thulium-doped fiber laser. | 12-05-2013 |
20130321087 | LOW VOLTAGE HIGH EFFICIENCY GALLIUM ARSENIDE POWER AMPLIFIER - A low voltage, switch mode PHEMT power amplifier with a 0.1 μm gate length and a low loss, lumped element, output matching circuit is disclosed that provides high performance over a frequency range of 1.4 GHz-2.5 GHz. The amplifier makes use of monolithic circuit technology for the first stage and output transistor, and uses a printed circuit board with surface mount components for the output matching network. The power output of the power amplifier is stable over a range of 60 degrees centigrade, has high power efficiencies of 44-53% with greater than 2 watts output power over the frequency range of 1.4 GHz and 2.5 GHz. In addition, through drain voltage control, the output power can be varied over a wide range between about 0.8 to 2.5 watts while still maintaining a high efficiency in the range of 50±3%. | 12-05-2013 |
20130285845 | DATA ADAPTIVE ANALOG TO DIGITAL CONVERTER - A system and method for mitigating Analog to Digital (A/D) clipping is disclosed. The mean and variance of analog input data are tracked and the bits of A/D are dynamically reassigned to keep the input signal within their range. The quantization levels of A/D are dynamically re-mapped to avoid changes in sensitivity of sensor system. The method is based on random walk statistic and keeps the sensitivity of the sensor system constant. Also the system and method provides a way to mitigate A/D clipping that avoids changing the sensitivity by dynamically re-mapping the quantization levels of the A/D, keeping the sensitivity of the system constant. | 10-31-2013 |
20130281108 | COORDINATED OPTIMIZATION OF UNDERLAY NETWORK COMMUNICATION FOR EFFICIENT USE OF SPECTRUM - A system and method for selecting an optimal frequency channel to communicate on in a wireless network is disclosed. The optimal frequency is selected from a predefined set of frequencies for all nodes to communicate on based on an exposure calculation. All underlay nodes collect initial SNR information from initial detection of other nodes and adjust their transmit power for an intended receiver such that the signal is received at the lowest allowable underlay-to-overlay power ratio, thus minimizing exposure. The desired underlay-to-overlay ratio is set based on how much we are capable of cancelling the overlay signal and the SINR at which a signal can be recovered such that the data can be successfully received from the underlay node. The optimal channel selected by this algorithm is the one with the least area of undesired exposure, or least probability of interfering with the primary user. The performance increases as a function of number of nodes, or data points. | 10-24-2013 |
20130279616 | CONTROL INTERVAL EXPANSION OF VARIABLE TIME DELAY CONTROL STRUCTURE FOR CHANNEL MATCHING - An adaptive time delay control system is provided for matching the propagation time delay between two samples of a signal traveling through two independent paths so that they can be coherently combined for additional signal processing functions such as cosite interference cancellers, adaptive interference cancellers and adaptive beam formers. The adaptive time delay control system and associated method advantageously provide improved continuous matching of the two channels over a wider adjustment range while preserving both convergence speed over the full range and minimum jitter upon convergence by using composite autocorrelation functions to control (adjusting) a matching time delay in one channel. | 10-24-2013 |
20130260703 | ULTRA-WIDEBAND HIGH POWER AMPLIFIER ARCHITECTURE - Techniques and architecture are disclosed for providing an ultra-wideband, multi-channel solid-state power amplifier architecture. In some embodiments, the architecture includes a power divider which splits an input signal and delivers that split signal to a plurality of downstream channel chipsets. Each channel chipset is configured to amplify a sub-band of the original full-band input signal and to provide the resultant amplified sub-band for downstream use, such as for transmission by an antenna operatively coupled with that channel. In the aggregate, the amplified sub-bands provide coverage of the same ultra-wideband frequency range of the original input signal, in some cases. In some embodiments, the architecture provides high radio frequency (RF) power with good amplifying efficiency and ultra-wide instantaneous frequency bandwidth performance in a small-form-factor package. In some instances, control circuitry is provided to control which chipset die(s) are enabled/disabled, thus providing control over gain and power levels of the output signal(s). | 10-03-2013 |
20130240733 | MODULAR MULTI-USE THERMAL IMAGING SYSTEM - A modular multi-use thermal imaging system is disclosed. In one embodiment, the modular multi-user thermal imaging system includes a modular mounting structure and a modular multi-use thermal imaging device configured to attach to one or more structures via the modular mounting structure. | 09-19-2013 |
20130230062 | END-PUMPED ALIGNMENT AND TEMPERATURE INSENSITIVE LASER TARGET DESIGNATOR AND MARKER - A compact, lightweight, laser target designator uses a TIR bounce geometry to place an end-pumped gain element functionally in the center of the resonator path, thereby allowing the resonator path to be terminated by a pair of crossed Porro prisms, so that the designator produces a high quality beam that is insensitive to alignment and temperature, and is low in manufacturing cost. Some embodiments fold the Porro legs of the resonator path back toward the gain element for compactness. Embodiments use a single gain element as both an oscillator gain element with TIR and as an output amplifier gain element without TIR. Various embodiments use block optical elements in a planar layout on a standard support medium such as aluminum to facilitate automated manufacturing. | 09-05-2013 |
20130229894 | UNDERWATER SENSOR ARRAYS LINEARIZED BY WEIGHT AND BUOYANCE DISTRIBUTION - A system and method for linearizing underwater sensor arrays is disclosed. The sensor array comprises slightly positive or negative buoyant sensors that are positioned along a cable. A weight is positioned at a deep end of the cable or a buoyant object is positioned at a shallow end of the cable, but not both. Distributing buoyant elements throughout the length of the array generates more consistent, uniformly distributed tension, enabling the sensor array to maintain a linear shape in currents of all strengths and speeds. | 09-05-2013 |
20130229704 | GRADED INDEX METAMATERIAL LENS - A lens with a graded index of refraction is presented. The lens is formed out of a sheet of material having a uniform thickness with a top surface and a bottom surface. Elongated openings are formed in the top surface extending downwardly to the bottom surface. Material of the elongated sheet is left between adjacent openings. A width of the material between adjacent openings is less than a wavelength of electromagnet energy the lens is configured to refract. The density and distribution openings varies across the sheet of material so that the refractive index of the lens varies across the sheet of material. | 09-05-2013 |
20130223835 | EMBEDDED LINEAR MOTOR DRIVE FOR IR CAMERA SHUTTER - An embedded linear motor drive for an IR camera comprising linear motor components that integrates into a sliding shutter is disclosed. The linear motor components can be a linear array of magnets, or a series of ridges or gear teeth. A motor drive is aligned with the linear motor components. The drive can be a series of coils connected to a power source that can move the shutter when the coils are energized in series. The drive can also be a pinion shaft with a friction wheel at one end or pinion gear that can connect to the ridges or gear teeth and move the shutter when the shaft is rotated. | 08-29-2013 |
20130222784 | Fiber Optically Coupled Laser Rangefinder For Use In A Gimbal Systems - A fiber optically coupled laser rangefinder (LRF) for use in a gimbal system to input/extract a laser beam into/from a camera is disclosed. in one embodiment, the fiber optically coupled LRF includes a gimbal assembly. Further, the gimbal assembly includes a first fiber optic cable for receiving the laser beam from a remote transmitter assembly, a fiber optically coupled laser interface module to receive the laser beam and opposing mirrors to direct the laser beam to a target. In addition, the gimbal assembly includes a second fiber optic cable for transmitting a return laser beam to a remote receiver assembly. The opposing mirrors are further configured to direct the return laser bean from the target to the fiber optically coupled laser interface module. The fiber optically coupled laser interface module is further configured to transmit it to the receiver assembly via the second fiber optic cable. | 08-29-2013 |
20130213252 | Inertial Delay Fuse - An inertial delay mechanism for use in an explosive projectile is provided. The delay mechanism consists of an inertial delay fuse that is precise, doesn't require sensitive primary explosives and doesn't utilize electronic circuitry. The inertial delay fuse includes a free sliding charge element that strikes an anvil located opposite to the sliding charge element. A delay gap is provided between the sliding charge element and the anvil. Upon impact, the sliding charge element slides forward and impacts the anvil, thereby inducing a shock wave in an initiator charge that subsequently results in detonation of main charges. The design is mechanically simple and robust enough to withstand severe g-loading forces that occur during firing and penetration of a projectile. | 08-22-2013 |
20130207713 | Coincident Tracking Turn-On For Mixed Voltage Logic - A method for dealing with high inrush current when voltage is applied to mixed voltage logic integrated circuits is disclosed. A depletion N-Channel Metal Oxide Semiconductor Field Effect Transistor (MOSFET) or junction Field Effect Transistor (JFET) is added to a linear voltage regulator in mixed voltage logic integrated circuits. The Field Effect Transistor (FET) is utilized to allow the core voltage to come up with Input/Output voltage prior to turn-on of linear voltage regulator. Turn-on state of FET allows the core voltage to rise with Input/Output voltage until the FET threshold is reached across the gate. When threshold is reached, the FET turns off to allow linear voltage regulator turn on and take over supply power. | 08-15-2013 |
20130207689 | PROGRAMMABLE TRANSCEIVER CIRCUIT - A multi-function programmable transceiver is described. The transceiver includes a driver circuit and a receiver circuit, which allows an Application Specific Integrated Circuit (ASIC) device to drive and receive data from other ASIC devices. Both the driver and receiver circuits share a common input/output (I/O) pin. The driver circuit can be programmed to provide one of the several driver functions, such as CMOS, TTL, PCI, HSTL, SSTL and LVDS. Other functional features of the transceiver that can be programmed are driving strengths or output impedance, output power supply voltage, single ended or differential mode of HSTL/SSTL transceivers, and class 1 or class 2 operations for SSTL/HSTL transceivers. The receiver circuit can also be programmed to provide one of the several receiver functions, such as CMOS, TTL, PCI, HSTL, SSTL and LVDS. | 08-15-2013 |
20130193326 | NON-LINEAR CALIBRATION OF NIGHT VISION MICROBOLOMETER - An apparatus and method for reducing nonlinearity artifacts in an IR imaging system applies a non-linear correcting function to signals received from a microbolometer. The non-linear correcting function can be a second-order polynomial, a third-order polynomial, some other formula, or a table from which corrections can be interpolated. In embodiments, the correcting function is automatically adjusted according to an ambient temperature measurement, to which a non-linear correction can be applied, either in a separate step or as an adjustment to the correcting function applied to the microbolometer signals. | 08-01-2013 |
20130188183 | Optical Multiplexer/Demultiplexer - An apparatus for optical spectrometry utilizes a simplified construction, reducing the number of independent optical elements needed while providing a sizeable dispersed spectrum. The apparatus provides a spectral intensity distribution of an input source wherein individual spectral components in the source can be measured and, in some embodiments, can be manipulated or filtered. | 07-25-2013 |
20130182180 | High Density Composite Focal Plane Array - A composite focal plane assembly with an expandable architecture has a multi-layer, double-sided aluminum nitride (AlN) substrate and vertical architecture to achieve the dual function of focal plane and electronics backplane. Imaging dice and other electrical components are mounted and wire bonded to one surface and then direct backplane connectivity is provided on the opposing surface through a matrix of electrical contacts. In one embodiment, a flexible connector is sandwiched between the AlN focal plane and a FR-4 backplane is used to compensate for differences in coefficient of thermal expansion (CTE) between the AlN and commercially available high density circuit card connectors that are commonly manufactured from materials with CTE properties more closely approximating FR-4. In an alternate embodiment, the FR-4 and flexible connectors are eliminated by using high density circuit card connectors that are fabricated out of materials more closely matching the CTE of AlN. | 07-18-2013 |
20130181810 | ERGONOMIC REMOTE CONTROL GLOVE - An ergonomic remote control glove for controlling an electronic device in military applications is disclosed. In one embodiment, the ergonomic remote control glove includes at least one motion sensor and a processor communicatively coupled to the at least one motion sensor. Further, the ergonomic remote control glove includes a communication link to connect to the electronic device. The communication link is communicatively coupled to the processor. Furthermore, the ergonomic remote control glove includes a wearable ergonomic glove configured to include the at least one motion sensor, the processor and the communication link. The processor is configured to send one or more control signals to the electronic device via the communication link upon detecting finger motions and/or hand gestures by the motion sensor. | 07-18-2013 |
20130181145 | SYSTEM AND METHOD FOR REDUCING TRAPPED ENERGETIC PROTON OR ENERGETIC ELECTRON FLUX AT LOW EARTH ORBITS - A system and method for improving the survivability of space systems following a High Altitude Nuclear Explosion (HANE) incident resulting in energetic electrons being trapped in the inner radiation belt of Earth is disclosed. The ULF electromagnetic waves is generated by space or ground based transmitters and the frequency range is selected such that the injected waves are in gyrofrequency resonance with trapped energetic particles. The Radiation Belt Remediation (RBR) depends on the wave-number of the injected waves and the wave-number of the injected waves increases along their propagation path when they approach the cyclotron frequency of the dominant or minority ions 0 | 07-18-2013 |
20130180153 | ACTIVE DISPLAY BASED TARGETING AND WEAPON SITING SYSTEM - An active display based targeting and weapon siting system for providing focusing and targeting data is disclosed. In one embodiment, the active display based targeting and weapon siting system includes an angled optic device configured to allow a user's line of sight to pass through the angled optic device. Further, the active display based targeting and weapon siting system includes a display module configured to provide images including video images, multicolor images and/or wide boresight adjustment and to direct the images into the user's line of sight through the angled optic device. | 07-18-2013 |
20130158528 | NONLINEAR OPTICAL CdSiP2 CRYSTAL FOR USE IN SURGICAL LASER | 06-20-2013 |
20130155493 | WALK-OFF COMPENSATOR WITH TILT FUNCTION - Techniques and structure are disclosed for implementing a spatial walk-off compensation mechanism having an integral tilt function. In some embodiments, the mechanism may comprise a tilt-ball mount having an integrated walk-off compensation medium. In some embodiments, the mechanism may be configured to receive an output beam from a non-linear converter (e.g., optical parametric oscillator or OPO) implementing a non-linear medium comprising a bi-refringent material (e.g., zinc germanium phosphide, or ZnGeP | 06-20-2013 |
20130153768 | SYSTEM AND METHOD FOR USING A PORTABLE NEAR IR LED LIGHT SOURCE AND PHOTOGRAMMETRY FOR BORESIGHT HARMONIZATION OF AIRCRAFT AND GROUND VEHICLE COMPONENTS - Disclosed is a system and method for using a portable near (infrared light emitting diode) IR LED light source and photogrammetry for boresight harmonization of aircraft and ground vehicle components. In one embodiment, orientation and positional parameters of two or more fixed points and distances between the two or more fixed points are measured using the portable near IR LED light source with a photogrammetric system. The two or more fixed points are reference points within the aircraft or the land vehicle. Further, the measured orientation and positional parameters of the two or more fixed points and the distances between the two or more fixed points on the aircraft or the land vehicle are compared with specified design parameters of the component in the aircraft or the land vehicle. Furthermore, the component in the aircraft or the land vehicle is harmonized based on an outcome of the comparison. | 06-20-2013 |
20130148673 | METHOD FOR BEAM COMBINATION BY SEEDING STIMULATED BRILLOUIN SCATTERING IN OPTICAL FIBER - A system and method for efficiently combining multiple laser beams into a single frequency by invoking stimulated Brillouin scattering (SBS) in a dual core optical fiber is disclosed. The method and apparatus essentially becomes a brightness converter for the input laser beams. An SRS seed is generated in a long length of fiber or by a diode and is launched into the back-end of the SBS combining optical fiber. Various single-frequency pump beams are launched into the front-end of the same fiber. The seed acts to lower a threshold for SBS in the fiber, thus invoking the nonlinearity. Provided the various pump beams are close in frequency and seed/pump modes overlap, each acts to amplify the seed through the nonlinear SBS process, providing an output signal which is brighter than the combined pump beams. | 06-13-2013 |
20130148189 | NONLINEAR OPTICAL CdSiP2 CRYSTAL FOR USE IN SURGICAL LASER | 06-13-2013 |
20130136146 | TEMPERATURE CONTROL OF A FIBER LASER SYSTEM - Techniques and architecture are disclosed for controlling the temperature of a fiber laser system. In some embodiments, a single thermoelectric cooler (TEC) may be utilized to control the temperature of multiple system components. In some embodiments, a TEC may be physically/thermally coupled to a laser diode, which in turn may be physically/thermally coupled with a mounting plate to which one or more fiber grating holders are physically/thermally coupled, and an optical fiber that is operatively coupled with the laser diode may be physically/thermally coupled with the one or more fiber grating holders. In some embodiments, this may provide a thermal pathway/coupling between the optical fiber (e.g., its fiber grating(s)), and the TEC. In some embodiments, this may reduce/minimize the quantity of temperature control components, reduce system size/complexity, increase system dependability, and/or increase system performance/efficiency. Numerous configurations and variations will be apparent in light of this disclosure. | 05-30-2013 |
20130127986 | COMMON HOLOGRAPHIC IMAGING PLATFORM - An imaging system and method is provided with transition in depth of field, the system comprising: an array of selectably activated sensors comprising first sensors receiving light of a first wavelength and second sensor receiving light of a second wavelength, the first wavelength corresponding to a short effective focal length and the second wavelength corresponding to a long effective focal length; an aperture common to both the first and second sensors configured with chromatic distortion such that a focal plane of light of the first wavelength is different from light of the second wavelength; a controller, the controller digitally between outputs of the first and second sensors based on the focal length required. | 05-23-2013 |
20130114993 | REPLACEABLE DOME ASSEMBLY - Techniques and structures are disclosed to facilitate efficient replacement of windows/domes of optical systems, such as turreted pointer/tracker systems and seekers and other such gimbal-based or fixed targeting systems. The techniques can be implemented, for example, in a mounting ring or bezel, wherein the dome/window center of curvature is actively aligned during assembly to a reference feature on a mounting bezel during the dome-to-bezel alignment. This reference feature then mechanically registers the dome-bezel assembly to a given chassis. In some embodiments, the techniques allow for positioning of a replacement window/dome on an optical lens system, such that co-boresight of multiple beam paths is automatically maintained. | 05-09-2013 |
20130087694 | INTEGRATED PARAMETER MONITORING IN A FIBER LASER/AMPLIFIER - Techniques are disclosed for monitoring parameters in a high power fiber laser or amplifier system without adding a tap coupler or increasing fiber length. In some embodiments, a cladding stripper is used to draw off a small percentage of light propagating in the cladding to an integrated signal parameter monitor. Parameters at one or more specific wavelengths (e.g., pump signal wavelength, signal/core signal wavelength, etc) can be monitored. In some such cases, filters can be used to allow for selective passing of signal wavelength to be monitored to a corresponding parameter monitor. The filters can be external or may be integrated into a parameter monitor package that includes cladding stripper with integrated parameter monitor. Other parameters of interest (e.g., phase, wavelength) can also be monitored, in addition to, or as an alternative to power. Numerous configurations and variations will be apparent in light of this disclosure (e.g., system-on-chip). | 04-11-2013 |
20130076420 | DIGITALLY CONTROLLED PULSE WIDTH MODULATOR UTILIZING REAL TIME CALIBRATION - A system and method for controlling pulse width for electronic devices in real time is disclosed. The system includes a Digital Pulse Width Modulator (DPWM), a real time calibration circuit and a delay line circuit. The real time calibration circuit is configured to ensure proper fractional delay is applied to yield correct duty cycle of the DPWM. The delay line circuit comprising a multiplexer delay line with built in decoders, modulates the pulse width for fractional clock cycle delay. | 03-28-2013 |
20130064518 | SYSTEM FOR CROSS-AXIS MANAGEMENT OF CONVENTIONAL AND FIBER OPTIC CABLES - A cross axis cable management system comprising a bird cage mechanism, a clock spring mechanism and a rolling loop mechanism positioned about a first axis, second axis and third axis of a gimbal mechanism respectively. Each mechanism provides defined channels and protective elements to prevent cable damage. The mechanisms also have one fixed end, one rotational end, and an optimized amount of slack for repeatable cable motion. The system effectively manages a large number of conventional and fiber optic cables while minimizing the friction or drag associated with the motion about the multiple axes and preventing cable damage and the resultant loss of performance. | 03-14-2013 |
20130063797 | OPTICAL LINE OF SIGHT TOGGLE MODULE - An optical LOS toggle uses two refractive optical elements located in the afocal space of an optical sensor. Optical surfaces of the two elements are shaped appropriately to work in combination with lateral displacements of the two elements such that the LOS angle is shifted. For a prescribed, discrete LOS shift, the optical image quality of the toggle module is corrected by a combination of aspheric shapes and diffractive surfaces on the optical surfaces of the two elements. To maintain performance along any radial direction and simplify fabrication, these aspheric or spheric shapes and diffractive surfaces should be rotationally symmetrical. Image quality is further improved through proper selection of the optical materials used to construct the optical elements. | 03-14-2013 |
20130063649 | DEFORMABLE FOCAL PLANE ARRAY - A deformable focal plane array (DFPA) for imaging systems is disclosed. In one embodiment, the DFPA includes a detection circuitry on one side. For example, the thickness of the DFPA is in a range of about 5 to 40 microns. In one exemplary embodiment, the DFPA when warped to a desired shape provides a substantially wider field of view (FOV) than a flat focal plane array (FPA). | 03-14-2013 |
20130063604 | FLUID COOLED THERMAL MANAGEMENT TECHNIQUE FOR A HIGH-DENSITY COMPOSITE FOCAL PLANE ARRAY - A fluid cooled thermal management technique for a high-density composite focal plane array (CPFA) is disclosed. In one embodiment, a high density CFPA assembly includes a plurality of imaging dies mounted on a front surface of a printed wiring board (PWB) and a base plate. The base plate has a substantially matched coefficient of thermal expansion (CTE) to that of the high density CFPA. Further, the high density CFPA is disposed on a front side of the base plate. Furthermore, the base plate has a plurality of integral serpentine fluid flow channels configured to receive and circulate fluid and further configured such that the heat generated by the CFPA is transferred via conduction into the base plate and to the integral serpentine fluid flow channels and to the circulating fluid to dissipate the generated heat. | 03-14-2013 |
20130063603 | VACUUM COMPATIBLE HIGH-DENSITY ELECTRICAL INTERCONNECT SYSTEM - A vacuum compatible high-density electrical interconnect system for use in a vacuum environment is disclosed. In one embodiment, the vacuum compatible high-density electrical interconnect system includes a vacuum compatible base plate, a vacuum compatible printed wiring board (PWB) disposed on the vacuum compatible base plate and a vacuum compatible interposer module disposed in the vacuum compatible base plate. Further, the vacuum compatible PWB includes a plurality of components on a front side of the vacuum compatible PWB and a plurality of associated pads on a back side of the vacuum compatible PWB. In one exemplary embodiment, the vacuum compatible interposer module is disposed in the vacuum compatible base plate such that it operatively connects to the plurality of associated pads on the back side of the vacuum compatible PWB and further operatively connects to a plurality of pads of an external device that is disposed outside the vacuum environment. | 03-14-2013 |
20130057698 | SYSTEM AND METHOD FOR SITUATIONAL AWARENESS AND TARGET CUEING - A system and method for situational awareness and target cueing for use in military applications is disclosed. In extreme low light situations where the LLL sensor cannot provide SA information, the system allocates thermal information to the green SA channel to maintain the supply of contextual information to the user and thus situational awareness (SA) never drops below the native resolution of the thermal sensor. This improved SA capability, surpasses any existing LLL sensor technology in a single channel (stand-alone) application in overcast star light and below conditions. | 03-07-2013 |
20130051897 | RIGID ADAPTOR RING FOR CTE MISMATCHED OPTICAL DEVICE COMPONENTS - A rigid adaptor ring for coefficient of thermal expansion (CTE) mismatched optical device components is disclosed. In one embodiment, either side of the rigid adaptor ring includes one or more mounting pads that are configured to interface between the CTE mismatched optical device components. | 02-28-2013 |
20130050840 | LOW DISTORTION ATHERMALIZED IMAGING LENS - A compact, lens suitable for airborne photography and mapping has distortion less than 0.6% and is athermal from −15° C. to +40° C. The lens is near-telecentric to less than 11°, apochromatic over the wavelength range 450 nm-650 nm, and has a full field of view of 60° (high quality field over 53°). The lens can be secondary color corrected. In embodiments, the focal length is 101 mm and the back working distance is more than 10 mm. Embodiments have a focal plane diameter of 104 mm and are compatible for use with a CMOS 1.8 gigapixel multiple FPA. In embodiments, the lens comprises three groups of optical elements, with an aperture located within the second optical group. In some embodiments the first group includes two elements, the second group includes six or seven elements, and the third group include three elements. In embodiments the lens (without window) is less than 180 mm long. | 02-28-2013 |
20130050839 | ATHERMAL APOCHROMATIC TELECENTRIC F-THETA LENS WITH LOW F-NUMBER - A compact F-theta lens suitable for precise mapping and aerial photography has an F# of not more than 4.5 and a full field of view of 60° (high quality field over) 53°. The lens is near-telecentric to less than 6°, apochromatic from 450 nm to 650 nm, and athermal from −15° C. to +40° C. Embodiments have a focal plane diameter of 104 mm and are compatible for use with a CMOS 1.8 gigapixel multiple FPA. In some embodiments the focal length is 101 mm and the back working distance is more than 10 mm. In embodiments the lens includes three groups of optical elements, with an aperture located between the first and second groups. In some of these embodiments, the first group has at least three elements, while the second and third groups have four and three elements respectively, and the diameter of the first two groups, including housing, is less than 65 mm. | 02-28-2013 |
20130050560 | ELECTRONIC SELECTION OF A FIELD OF VIEW FROM A LARGER FIELD OF REGARD - An electronic vertical adjustment focal plane assembly for electronic selection of a field of view from a larger field of regard is disclosed. In one embodiment, the electronic vertical adjustment focal plane assembly includes a lens assembly configured to focus radiation coming from an external field of view on to the focal plane assembly. Further, the electronic vertical adjustment focal plane assembly includes a fixed focal plane assembly that is oversized to substantially cover an entire field of regard and configured to receive the focused radiation from the lens assembly and to output a signal. Furthermore, the electronic vertical adjustment focal plane assembly includes a video controller electronically coupled to the signal from the fixed focal plane assembly and to generate an image based on an electronically selected desired elevational field of view. | 02-28-2013 |
20130044564 | SYSTEM FOR TESTING AN ACOUSTIC ARRAY UNDER WATER LOAD - An acoustic projector testing system using an acoustically transparent portable vessel which encloses a test apparatus is disclosed. The vessel is connected to an adapter plate which allows the test apparatus to be submerged in water. The testing system is then submerged in shallow water. An external pump fills the vessel with water and the air inside the vessel is allowed to escape through an external, sealable vent, Once all the air is evacuated, the vent is sealed. The pressure inside the vessel can be altered by adjusting the amount of water pumped into the vessel to perform necessary testing. | 02-21-2013 |
20130038626 | COLOR AUGMENTED LOCAL AREA CONTRAST ENHANCEMENT - A method and system for color enabled local area contrast enhancement, are provided by generating a first copy of an image; processing the first copy to locally enhance visual contrast in the image; generating a second copy of the image; processing the second copy of the image to provide at least one visual cue to radiant flux within the image incident on the focal plane pixels; displaying a combined image formed from the combination of the locally enhanced first copy and flux mapped the second copy. | 02-14-2013 |
20130016909 | METHOD FOR SPECTRAL-SPATIAL-TEMPORAL IMAGE DETECTION - A method of spectral-spatial-temporal image detection is disclosed. In one embodiment, a spectrally differenced image is obtained by computing a difference of at least two intensity values in at least two spectral bands of an image. Further, a spatially filtered spectral image is obtained by applying a spatial median filter to the obtained spectrally differenced image. Furthermore, a temporal image is obtained by determining a temporal pixel value difference using a computed predictive frame difference. In addition, a spectral-spatial-temporal filtered image for detection is obtained by using the obtained spatially filtered spectral image and the temporal image. | 01-17-2013 |
20130004781 | INTEGRATION CMOS COMPATIBLE OF MICRO/NANO OPTICAL GAIN MATERIALS - A method is provided for the integration of an optical gain material into a Complementary metal oxide semiconductor device, the method comprising the steps of: configuring a workpiece from a silicon wafer upon which is disposed an InP wafer bearing an epitaxy layer; mechanically removing the InP substrate; etching the InP remaining on epitaxy layer with hydrochloric acid; depositing at least one Oxide pad on revealed the epitaxy layer; using the Oxide pad as a mask during a first pattern etch removing the epitaxy to an N level; etching with a patterned inductively coupled plasma (ICP) technique; isolating the device on the substrate with additional pattern etching patterning contacts, applying the contacts. | 01-03-2013 |
20130000881 | PASSIVE HEAT EXCHANGER FOR GIMBAL THERMAL MANAGEMENT - A passive heat exchanger for gimbal thermal management is disclosed. In one embodiment, a thermal management system includes one or more electronics and/or sensor equipment. Further, the thermal management system includes a thermally conductive shell configured to house the electronics and/or sensor equipment. Furthermore, the thermally conductive shell includes an external surface and an internal surface. In addition, at least some portion of the external surface and the internal surface of the thermally conductive shell include an extended surface configured to reduce thermal resistance between an interior region of the thermally conductive shell and ambient air. | 01-03-2013 |
20130000828 | Fast Electrostatic Shutter And Method Of Achieving Offset Compensation In Infrared Video Imagers Using Fast Shutters - Embodiments of the invention are directed to methods and apparatus for infrared imagers including fast electrostatic shutters and offset compensation. Fast electrostatic shutters are used for video image correction including image offset compensation where temporal noise and scene nonuniformity are corrected. This method provides a shutterless experience for the user because the image will be blocked for only one frame at a time. A method of manufacturing an electrostatic infrared shutter includes a conductive infrared-transparent substrate, covering it with an insulating layer, depositing adhesive and a thin film stack, delineating a working area, providing contacts, heat-treating the assembly, and making the polymer non-reflective in the infrared. | 01-03-2013 |
20120322177 | METHOD OF INTEGRATING SLOTTED WAVEGUIDE INTO CMOS PROCESS - A method for integrating a slotted waveguide into a CMOS process is disclosed. A slot can be patterned on a SOI wafer by etching a first pad hard mask deposited over the wafer. The slot is then filled with a plug material by depositing a second pad hard mask over the first pad hard mask. A waveguide in association with one or more electronic and photonic devices can also be patterned on the SOI wafer. The trenches can be filled with an isolation material and then polished. Thereafter, the first and second pad hard masks can be stripped from the wafer. The slot can once again be filled with the plug material and patterned. After forming one or more electronic and photonic devices on the wafer using the standard CMOS process, a via can be opened up down to the nitride plug and the nitride plug can then be removed. | 12-20-2012 |
20120321246 | ASYMMETRIC SLOTTED WAVEGUIDE AND METHOD FOR FABRICATING THE SAME - An asymmetric slotted waveguide and method for fabricating the same. The slotted waveguide is constructed in silicon-on-insulator using a Complementary metal-oxide-semiconductor (CMOS) process. One or more wafers can be coated with a photo resist material using a photolithographic process in order to thereby bake the wafers via a post apply bake (PAB) process. An anti-reflective coating (TARC) can be further applied on the wafers and the wafers can be exposed on a scanner for the illumination conditions. After a post exposure bake (PEB), the wafers can be developed in a developer using a puddle develop process. Finally, the printed wafers can be processed using a shrink process to reduce the critical dimension (CD) of the slot and thereby achieve an enhanced asymmetric slotted waveguide that is capable of guiding the optical radiation in a wide range of optical modulation applications using an electro-optic polymer cladding. | 12-20-2012 |
20120317773 | DYNAMIC REAL-TIME BORESIGHTING SYSTEM AND METHOD - Disclosed is a dynamic real-time boresighting system and method. In one embodiment, the method includes obtaining a mapping function by associating deflection and rotation data of strategically located at least two sensors with sensor deflection data, real-time or static sensor readings from at least two sensors which are strategically located on the component in the aircraft or the land vehicle, while the aircraft or the land vehicle is moving or static respectively and determining an alignment of the component by comparing the real-time or static sensor readings obtained from the strategically located at least two sensors with the obtained mapping function. | 12-20-2012 |
20120312184 | ADAPTABLE SMART WARHEAD AND METHOD FOR USE - A method for detonating a munition comprising the steps of providing a plurality of micro-detonators and microprocessors in said munition and initiating said micro-detonators in a predetermined sequence by means of said microprocessor. Depending on the specific predetermined sequence which is selected, one of a variety of explosive modes may be achieved. | 12-13-2012 |
20120306050 | METHOD FOR IMPROVING PROMPT DOSE RADIATION RESPONSE OF MIXED-SIGNAL INTEGRATED CIRCUITS - A system and method for improving the prompt dose radiation response of mixed-signal integrated circuits is disclosed. An internal analog circuit inside a mixed-signal integrated circuit generates an internal analog reference voltage that has been used for various purposes in the integrated circuit. At least one external capacitor is added either internal or external to a device package of the integrated circuit. The external capacitor reduces any change in the internal reference voltage due to prompt dose radiation by stabilizing the internal reference voltage and thus improves prompt dose radiation response of mixed-signal integrated circuits. A much greater value of capacitance may be provided without increase in dielectric rupture suceptability or decrease in manufacturing yield which may be associated with added on-chip capacitance. This increased capacitance primarily reduce the amount of disturbance caused to the internal node during a prompt dose radiation event. | 12-06-2012 |
20120304919 | Method For Growing Germanium Epitaxial Films - A method for growing germanium epitaxial films is disclosed. Initially, a silicon substrate is preconditioned with hydrogen gas. The temperature of the preconditioned silicon substrate is then decreased, and germane gas is flowed over the preconditioned silicon substrate to form an intrinsic germanium seed layer. Next, a mixture of germane and phosphine gases can be flowed over the intrinsic germanium, seed layer to produce an n-doped germanium seed layer. Otherwise, a mixture of diborane and germane gases can be flowed over the intrinsic germanium seed layer to produce a p-doped germanium seed layer. At this point, a hulk germanium layer can be grown on top of the doped germanium seed layer. | 12-06-2012 |
20120292726 | SENSOR INTEGRATED SLIT FOR PUSHBROOM HYPERSPECTRAL SYSTEM - An entry slit panel for a push-broom hyperspectral camera is formed at least partly from a silicon wafer on which at least one companion sensor is fabricated, whereby the companion sensor is co-planar with the slit and detects light imaged on the panel but not on the slit. In embodiments, the companion sensor is a panchromatic sensor or a sensor that detects light outside the wavelength range of the camera. At least a region of the wafer is back-thinned to a thickness appropriate for a diffraction slit. The slit can be etched or laser cut through the thinned region, or formed between the wafer and another wafer or a conventional blade. The wafer can be back-coated or metalized to ensure its opacity across the camera's wavelength range. The companion sensor can be located relative to the slit to detect scene features immediately before or after the hyperspectral camera. | 11-22-2012 |
20120290741 | PEEK/POKE INTERFACE ON RADIO SYSTEM CORE ENGINE MODEM TO ALLOW DEBUG DURING SYSTEM INTEGRATION - A system and method for allowing individual register access during system integration and test is disclosed. A Chip select is routed between an OMAP processor and a waveform FPGA and configured to allow individual register access during system integration and test. Logic is then added to the FPGA to support the single access to the FPGA's peripherals. This allows the user connected to the debug port to be able to send and receive individual commands to and from the waveform FPGA's peripherals. A Graphical User Interface (GUI) maybe developed to provide a graphical interface or scripts may be used to assemble multiple commands thereby increasing flexibility to configure the peripherals during integration and troubleshooting. | 11-15-2012 |
20120287977 | CLOCK DISTRIBUTION ARCHITECTURE FOR DUAL INTEGRATED CORE ENGINE TRANSCEIVER FOR USE IN RADIO SYSTEM - A method and apparatus of minimizing corruption of a reference clock to a RF circuitry in a radio system is disclosed. A DICE-T receives a reference clock in a Low Voltage Differential Signal (LVDS) format from a GVA. The DICE-T personality card converts the reference clock signal into an analog signal. The analog signal is supplied to the Core Engine RF card and the LVDS format signal is supplied to the Core Engine modem for local clocking. The Core Engine RF feeds the analog signal into a programmable phase locked loop chip to generate all the clocks required for RF processing. The analog signal is also used to provide the clocks to the ADC and DAC of core engine modem. By routing the reference clock directly to the RF card then deriving the modem clocks, the phase noise of the reference clock is reduced. | 11-15-2012 |
20120287971 | METHOD FOR EMULATING LOW FREQUENCY SERIAL CLOCK DATA RECOVERY RF CONTROL BUS OPERATION USING HIGH FREQUENCY DATA - A system and method for emulating low frequency RF control bus operation using high frequency data is disclosed. In transmission path, the low frequency RFCB transmit data bytes are encoded and then up-sampled. The up-sampled data is then sent to hardware serializer for transmission. The resulting RF serial output stream appears to the external receiver to be encoded at low frequency even though the transceiver is operating at high frequency. In reception path, RFCB serial input data is de-serialized and then down-sampled. The down sampled data is then passed through custom byte-alignment logic and finally decoded. The transceivers are operated at high frequency but data is decoded and received as if it were at low rate. The FPGA serial transceiver are operated at a high frequency and sends each data bit a plurality of times to create a low effective data rate. | 11-15-2012 |
20120287575 | MODULE COOLING METHOD AND PLENUM ADAPTOR - A method and apparatus for cooling modules in a radio system is disclosed. The apparatus comprises an adaptor module with side walls and integrated heat exchanging elements. The adaptor module adapts the air flow from a chassis in the radio system such that the exiting ducting on the chassis efficiently mate with the air conduits in the modules. The adaptor allows the use of new high power density modules in the existing chassis without changing the module design. The use of adaptor module in chassis provides efficient cooling and use less volume in the chassis. | 11-15-2012 |
20120286570 | POWER DISTRIBUTION ARCHITECTURE FOR DUAL INTEGRATED CORE ENGINE TRANSCEIVER FOR USE IN RADIO SYSTEM - A method and apparatus of using DICE-T personality cards to adapt the incoming voltages supplied by the GVA and provide the ability to turn any voltage to any card on or off depending upon operating mode in a radio system is disclosed. The ability to control voltages individually also allows the control of the power-up sequencing of any card. The DICE-T personality cards use voltages from GVA to generate the additional voltages required by the Core Engines and VHF Module. All of the voltages are connected to hot-swap controllers which provide switching of the power to each destination. These hot-swap controllers also provide monitoring of voltage and shut-down if over-current conditions occur. The two DICE-T personality cards each have a Complex Programmable Logic Device (CPLD) controls the hot-swap controller for each voltage. The CPLD also controls the sequencing of the individual voltages applied to each module. | 11-15-2012 |
20120243570 | Integrated POD Optical Bench Design - In an integrated gimbal and High-Powered Multiband Laser (HPMBL) for use in an infrared countermeasure apparatus in a pod mounted on an aircraft, the improvement comprises an optical bench that connects the optical path between side-by-side mounted gimbal and high power laser; and a kinematic mounting system that prevents optical bench bending. | 09-27-2012 |
20120233585 | System Design Combining Functional Decomposition And Object-Oriented Programming - An architecture for designing complex systems includes combining functional decomposition and object-oriented techniques at each level along with specifying links between the levels as well as links between the objects at a level to promote understanding of the system under development and assist both the system design engineers and the hardware and software engineers to develop the system. | 09-13-2012 |
20120227611 | ADAPTABLE SMART WARHEAD AND METHOD FOR USE - A method for detonating a munition comprising the steps of providing a plurality of micro-detonators and microprocessors in said munition and initiating said micro-detonators in a predetermined sequence by means of said microprocessor. Depending on the specific predetermined sequence which is selected, one of a variety of explosive modes may be achieved. | 09-13-2012 |
20120223253 | SYSTEM AND METHOD FOR REDUCING TRAPPED ENERGETIC PROTON FLUX AT LOW EARTH ORBITS - A system and method for reducing energetic proton flux trapped in the inner radiation belt by injecting Ultra Low Frequency (ULF) electromagnetic waves is disclosed. The ULF electromagnetic waves is generated by space or ground based transmitters and the frequency range is selected such that the injected waves are in gyrofrequency resonance with trapped 10 to 100 Mev protons. Pitch angle scattering of the trapped protons in gyro-resonance with the injected waves increases their precipitation rate by forcing their orbits into pitch angles inside the atmospheric loss-cone where they are lost by intaracting with the dense neutral atmosphere at altitudes below 100 km. The reduction of energetic proton flux trapped in the inner radiation belt allows use of commercial electronics with submicron feature size on Low Earth Orbit satellites and microsatellites without the operational constraints imposed by the presence of energetic proton fluxes trapped at the inner radiation belts. | 09-06-2012 |
20120210902 | MULTIPLE DIVERGING PROJECTILE SYSTEM - A system for firing multiple projectiles in a parallel or diverging manner is provided. The system can comprise tail-end portions of projectiles that add structure to a cartridge, provide for efficient combustion, allow projectiles to transition from a straight configuration in the cartridge to a splayed configuration in a chamber, and ensure complete evacuation of the chamber. The system can include a tail-end portion of a particular projectile with openings that distribute energy from combustion of an ignition charge, facilitating firing of multiple projectiles. A tail-end portion of a projectile can include a ball joint upon which the body portion of the projectile moves causing an angle between the body portion and the tail-end portion. A space can exist in the body portion adjacent to the ball joint to allow off-center shifting of the body portion with respect to the ball joint. | 08-23-2012 |
20120210855 | SYSTEM AND METHOD FOR LAUNCHING COUNTERMEASURES TO MISSILE ATTACK - A system and method for launching countermeasures, such as flares and chaff, from an aircraft under attack by a missile. A plurality of countermeasure launchers are mounted preferably on the two sides and tail and nose of the aircraft and communicate with a missile detection and warning system mounted in the aircraft. Based upon the circumstances reported by the warning system, the appropriate countermeasure weapon or weapons are selected and dispensed. The circumstances reported are based upon the angle of elevation and azimuth angle of the approaching missile in relation to the aircraft and distance of the missile from the aircraft. Also, the speed and altitude of the aircraft are utilized in determining the countermeasures applied. The various responses are distinguished by the number and types of countermeasures dispensed, the dispense time of the countermeasures and the particular launcher or launchers used, based upon the type of aircraft being protected. | 08-23-2012 |
20120208359 | Structure And Method For Fabrication Of Field Effect Transistor Gates With Or Without Field Plates - A method for fabrication of a field effect transistor gate, with or without field plates, includes the steps of defining a relatively thin Schottky metal layer by a lithography/metal liftoff or metal deposition/etch process on a semiconductor surface. This is followed by depositing a dielectric passivation layer over the entire wafer and defining a second lithographic pattern coincident with or slightly inset from the boundaries of the previously defined metal gate layer. This is followed by etching the dielectric using dry or wet etching techniques and stripping the resist, followed by exposing and developing a third resist pattern to define the thicker gate metal layers required for electrical conductivity and also for the field plate if one is utilized. The final step is depositing gate and/or field plate metal, resulting in a gate electrode and an integral field plate. | 08-16-2012 |
20120207466 | COMPACT, LIGHTWEIGHT, ENERGY EFFICIENT, LOW NOISE SHUTTER MECHANISM - A robust, compact, lightweight, low energy, low cost, and low noise mechanical mechanism suitable for military and other demanding applications includes a Geneva drive that transitions a camera shutter or other element between two positions and locks the shutter or other element in place between transitions, thereby isolating the remainder of the mechanism from shutter vibrations and torques. Accordingly, the mechanism controlling the Geneva drive need not be especially robust even for military applications, and can be similar in size, weight, energy consumption, and noise to a conventional shutter mechanism. The driving mechanism can include a rotary actuator or a linear actuator with a rack gear. In various embodiments the driving mechanism includes a piezomotor. In certain embodiments, the starting and ending positions of the mechanism are determined by sensors, and in some embodiments the starting and ending positions are adjustable. | 08-16-2012 |
20120206890 | METHOD FOR INTEGRATION OF CIRCUIT COMPONENTS INTO THE BUILD-UP LAYERS OF A PRINTED WIRING BOARD - The present invention provides a printed wiring board assembly having active and passive components embedded between the printed wiring board layers and associated fabrication method so as to complete a multilayer printed wiring board to improve the flexibility of circuit layout. | 08-16-2012 |
20120205726 | Structure And Method For Fabrication Of Field Effect Transistor Gates With Or Without Field Plates - A method for fabrication of a field effect transistor gate, with or without field plates, includes the steps of defining a relatively thin Schottky metal layer by a lithography/metal liftoff or metal deposition/etch process on a semiconductor surface. This is followed by depositing a dielectric passivation layer over the entire wafer and defining a second lithographic pattern coincident with or slightly inset from the boundaries of the previously defined metal gate layer. This is followed by etching the dielectric using dry or wet etching techniques and stripping the resist, followed by exposing and developing a third resist pattern to define the thicker gate metal layers required for electrical conductivity and also for the field plate if one is utilized. The final step is depositing gate and/or field plate metal, resulting in a gate electrode and an integral field plate. | 08-16-2012 |
20120201545 | Multifunction Receiver-On Chip For Electronic Warfare Applications - What is provided is a receiver-on-a-chip comprising a monolithic integrated circuit that reduces the receiver to a cigarette-pack-sized assembly mountable directly at an antenna element, with a much-increased operational bandwidth and instantaneous bandwidth, increased dynamic range and with a two-order-of-magnitude decrease in size and weight. Moreover, because of the elimination of all of the I/O drivers and attendant circuitry, power consumption is reduced by two-thirds, whereas the mean time before failure is increased to 10,000 hours due to the robustness of the monolithic integrated circuit and use of fiber optics. | 08-09-2012 |
20120196640 | SYSTEM, VOICE CABLE ASSEMBLY, AND METHOD FOR VOICE COMMUNICATION - Disclosed is a system for voice communication that includes a power supply assembly, at least one handset configured to transmit voice signals, a voice cable assembly communicably coupled with the power supply assembly and the at least one handset, and a main terminal communicably coupled with the voice cable assembly. The voice cable assembly includes a cable harness configured to receive a predetermined power from the power supply assembly and to receive voice signals from the at least one handset. Also, the voice cable assembly includes a voice cable circuit card assembly communicably coupled with the cable harness to receive the predetermined power and the voice signals from the cable harness. The voice cable circuit card assembly is configured to adapt the voice signals by utilizing the predetermined power in order to match a predefined voice requirement. Further disclosed are a voice cable assembly and a method for voice communication. | 08-02-2012 |
20120186477 | ENHANCED RELIABILITY MINIATURE PISTON ACTUATOR FOR AN ELECTRONIC THERMAL BATTERY INITIATOR - A system for a piston actuator comprising a configuration with lead styphnate charge material and Nichrome® bridgewire, wherein the device configuration provides very high reliability, including piston actuator applications; resistance of the bridgewire is carefully controlled to optimize power transfer from the firing circuit to the bridgewire and charge material. | 07-26-2012 |
20120175999 | RADIOISOTOPE FUELED ROTARY ACTUATOR FOR MICRO AND NANO VEHICLES - The invention provides an actuator apparatus and method where a source provides electrons to a target material wherein electrical work is performed. A beta emission process comprises a source material emitting electrons which are then captured by a target material. The actuator's source vanes rotate within an electric field between the target chutes' walls, generating torque. The principal providing torque and power is the change in energy as a vane gets closer to the outer walls. During the release and capture process, electrical work is performed which, in turn, is transferred into mechanical work in the form of rotation of the rotor. Specific applications include a radioisotope fueled rotary actuator for micro and nano air vehicles employed as the main form of propulsion. | 07-12-2012 |
20120161762 | LONG RANGE DETECTION OF EXPLOSIVES OR CONTRABAND USING NUCLEAR QUADRUPOLE RESONANCE - Nuclear quadrupole resonance substance detection at a distance is provided by crossed or overlapping high frequency beams in which the frequency of one of the beams is offset with respect to the frequency of the other beam by an amount equal to the resonant frequency of the non-linear material to be detected. The presence of energy at the offset frequency within the overlapping beams pumps any non-linear material within the overlapping beams to cause stimulated emission which is detected, in one embodiment, utilizing a network analyzer, along with correlation of the detected stimulated emission signature with a library of signatures for predetermined substances. | 06-28-2012 |
20120161761 | TRANSMISSION LINE ARRAY FOR EXPLOSIVE DETECTION USING NUCLEAR QUADRUPOLE RESONANCE - A transmission line array is used for explosive/contraband detection using nuclear quadrupole resonance in which the array is driven in-phase with synchrony frequency-swept signals. Each of the balanced transmission lines is fed with a low power swept frequency source and stimulated emissions are picked out with a directional coupler. Location is provided using a cross grid array or a phase detector is used for each balanced line, with phase determining the distance to the sensed substance. | 06-28-2012 |
20120139536 | SHIPPING CONTAINER EXPLOSIVES AND CONTRABAND DETECTION SYSTEM USING NUCLEAR QUADRUPOLE RESONANCE - For container-carried explosives or contraband, stimulated emissions due to nuclear quadropole resonance are detected utilizing a terminated balanced transmission line and a directional coupler for the detection of explosives, contraband, narcotics and the like that exist in metal containers. | 06-07-2012 |
20120136585 | METHOD AND SYSTEM FOR THE DETECTION AND IDENTIFICATION OF EXPLOSIVES AND/OR CONTRABAND - A nuclear quadrupole resonance system which senses the stimulated emission from target molecules includes in a calibration step and a stimulated emission response detection step, with the system employing clutter cancellation involving linear regression and the use of cross correlation with a series of known molecular signatures, both increasing the signal-to-noise ratio of the system. | 05-31-2012 |
20120098101 | PHOTO-PATTERNED CARBON ELECTRONICS - A system is provided for the manufacture of carbon based electrical components including, an ultraviolet light source; a substrate receiving unit whereby a substrate bearing a first layer of carbon based semiconductor is received and disposed beneath the ultraviolet light source; a mask disposed between the ultraviolet light source and the carbon based semiconductor layer; a doping agent precursor source; and environmental chemical controls, configured such that light from the ultraviolet light source irradiates a doping agent precursor and the first carbon layer. | 04-26-2012 |
20120073360 | METHOD AND SYSTEM FOR SURFACE MODIFICATION OF SUPERADSORBENT MATERIAL FOR IMPROVED ENVIRONMENTAL AND URBAN AIR SAMPLING APPLICATIONS - A method for providing superadsorption of polar organic compounds using a material system comprising the steps of enhancing adsorption by means of using high surface area and mass transfer rates and decreased reactivity at surface sites attractive to the polar compounds and employing consequence management by maintaining a high rate of adsorptivity combined with high fidelity and accuracy of the material system. | 03-29-2012 |
20120068874 | Method And Apparatus For Laser Return Characterization In A Countermeasures System - In a method for laser return characterization in a DIRCM system, the improvement locating, a single IR detector in an aperture in an image mirror so that its output can be used for countermeasure effectiveness measurement, missile range measurement, missile characteristic determination and to provide an AGC signal for tracking camera gain control. | 03-22-2012 |
20120066169 | TRUST MANAGEMENT SYSTEM FOR DECISION FUSION IN NETWORKS AND METHOD FOR DECISION FUSION - Disclosed is a trust management system for decision fusion in a network. The trust management system includes a detection subsystem having a plurality of sensors, and a plurality of channels. Each sensor of the plurality of sensors detects one of an occurrence and a non-occurrence of an event in the network. The trust management system further includes a fusion subsystem communicably coupled to the detection subsystem through the plurality of channels for receiving a decision of the each sensor and iteratively assigning a pre-determined weightage. The fusion subsystem ascertains a summation of respective decisions of the plurality of sensors and compares the weighted summation with a corresponding decision of the each sensor. The fusion subsystem further updates the assigned pre-determined weightage and determines the presence of the each sensor being one of a compromised sensor and a non-compromised sensor. Further disclosed is a method for decision fusion in a network. | 03-15-2012 |
20120046511 | METHOD AND SYSTEM FOR SURFACE MODIFICATION OF SUPERADSORBENT MATERIAL FOR IMPROVED ENVIRONMENTAL AND URBAN AIR SAMPLING APPLICATIONS - A method for providing superadsorption of long chain hydrocarbon compounds using a material system comprising the steps of enhancing adsorption by decreasing reactivity at surface sites attractive to long chain hydrocarbon compounds and employing consequence management by maintaining a high rate of adsorptivity combined with high fidelity and accuracy of the material system. | 02-23-2012 |
20120033084 | Method For Centroiding And Tracking A Distorted Optical Image - A centroiding method is provided for an optical tracking system including a laser used for countermeasuring purposes in which a pencil thin laser beam is accurately positioned onto a target through the use of centroiding techniques for ascertaining the position not only of the target but also the laser beam, with the centroiding techniques resulting in a sub-pixel level resolution. The sub-pixel resolution permits utilization of smaller cost-effective focal plane arrays by giving the small focal plane array a resolution associated with much larger focal plane arrays. | 02-09-2012 |
20120029884 | RADIATION-PROTECTION DEVICE - A radiation-protection device is provided that includes a substrate and a surface structure formed on the substrate. The surface structure has an arrangement and interacts with radiation and the substrate to at least (a) substantially transmit or attenuate radiation at a wavelength and an energy below a threshold energy, and (b) substantially reflect radiation at the wavelength and an energy above the threshold energy. | 02-02-2012 |
20120021361 | RADIATION-PROTECTION DEVICE - A radiation-protection device is provided that includes a substrate and a surface structure formed on the substrate. The surface structure has an arrangement and interacts with radiation and the substrate to at least (a) substantially transmit or attenuate radiation at a wavelength and an energy below a threshold energy, and (b) substantially reflect radiation at the wavelength and an energy above the threshold energy. | 01-26-2012 |
20120019368 | METHOD OF AUTHENTICATING AN ARTICLE USING MICRORADIOS - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 01-26-2012 |
20120015480 | SYSTEM AND METHOD FOR MULTI-CHIP MODULE DIE EXTRACTION AND REPLACEMENT - A system and method are provided in which a first chip in a stacked multi-chip module configuration is affixed via one or more adhesion layers to a first portion of a partitioned interposer unit. Planar partitions of the interposer are physically bonded via multiple solder “bumps,” which possess high tensile strength but low resistance to horizontal shear force or torque. A second chip is affixed via one or more adhesion layers to the second portion of the partitioned interposer. The chips may thus be separated by horizontally and oppositely shearing or twisting the first and second portions of the partitioned interposer away from one another. | 01-19-2012 |
20120012811 | CORNER CUBE ENHANCED PHOTOCATHODE - Techniques are disclosed for improving the quantum efficiency of photocathode devices. The techniques allow for an increase in the optical thickness of the photocathode device, while simultaneously allowing for an increase in the probability of electron escape into the vacuum of the device. The techniques are particularly useful in detector and imaging. In one embodiment, a photocathode device is provided that has an array of corner cubes fabricated in a surface of the photocathode. The corner cube array is made of the same material as the photocathode layer. The device may be, for example, a detector or image intensifier that operates in the UV, visible, and IR light spectrums, and may further include a gain medium, anode, and readout device. Techniques for forming the device are also provided. | 01-19-2012 |
20110319047 | OFF-LINE CHANNEL TUNING AMPLITUDE SLOPE MATCHED FILTER ARCHITECTURE - A tuning control system and associated method is provided for continuously and automatically tuning a lobed amplitude slope matching filter (ASMF) to a band center of an interfering signal to provide improved rejection of an interfering signal coupled from a transmission antenna into a local receive antenna in the presence of local multi-path, thereby providing improved interference cancellation system performance. The tuning control system is provided as an element of an interference cancellation system. | 12-29-2011 |
20110319046 | Quadratic Amplitude Control Circuit For Cosite Interference Cancellation - A quadratic amplitude matching system and associated method with an associated tuning control system is provided for continuously and automatically tuning a quadratic amplitude matching filter (QAMF) to a band center of an interfering signal to provide improved rejection of an interfering signal coupled from a transmission antenna into a local receive antenna in the presence of local multi-path, thereby providing improved interference cancellation system performance. The matching control system is provided as an element of an interference cancellation system. | 12-29-2011 |
20110304430 | METHOD OF TRACKING A CONTAINER USING MICRORADIOS - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 12-15-2011 |
20110304391 | DECADE BANDWIDTH PLANAR MMIC FOUR PORT TRANSFORMER - A wide bandwidth planar four port MMIC transformer is provided by input diplexers which divide up the incoming signal into a high band and a low band, with the resulting signals coupled to high band and low band four port transformers implemented in one embodiment using spiral inductors and coupled lines, the outputs of which are combined using two output diplexers to provide a decade bandwidth transformer. | 12-15-2011 |
20110283877 | METHOD OF PROVIDING A DEFENSE AGAINST A SHAPED CHARGE - A method of providing a defense against a shaped charge uses an outer and an inner armor layer provided with a medial space between these outer and inner armor layers. One or more defensive shaped charges are positioned in the medial space. If the outer armor layer is attacked by ordnance having an offensive shaped charge, one or more of the defensive shaped charges positioned in the medial space is detonated so as to degrade the effectiveness of the offensive shaped charge and prevent penetration of the inner armor layer. | 11-24-2011 |
20110279238 | METHOD FOR LOCATING ITEMS - A convenient handheld locator is provided for locating an item in an urban environment in which the locator is programmed to search for and locate specific items, with the detected item being displayed on the locator as to its identity or name, also displaying where the item is relative to the locator, as to position and range. | 11-17-2011 |
20110276044 | METHOD FOR TREATING BIOLOGICAL MATERIAL - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 11-10-2011 |
20110275324 | COMMUNICATION SYSTEM WITH MICRORADIOS - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 11-10-2011 |
20110273350 | TAPERED SLOT ANTENNA - Methods, antennas and other embodiments associated with impedance matching an antenna feed slot. A slot antenna includes a planar metal sheet. A feed slot opening is formed in the metal sheet. The feed slot has a first end and a second end. A tapered opening is formed in the metal sheet. Adjacent sides of the tapered opening touch the first end of the feed slot. An impedance matching star shaped opening is formed in the metal. The impedance matching star shaped opening touches the second end of the feed slot. | 11-10-2011 |
20110273349 | TAPERED SLOT ANTENNA - Methods, antennas and other embodiments associated with impedance matching an antenna feed slot are based on a fractal shape. A slot antenna includes a planar metal sheet. A feed slot opening is formed in the metal sheet. The feed slot has a first end and a second end. A tapered opening is formed in the metal sheet. Adjacent sides of the tapered opening touch the first end of the feed slot. An impedance matching fractal shaped opening is formed in the metal. The impedance matching fractal shaped opening touches the second end of the feed slot. | 11-10-2011 |
20110273300 | METHOD OF TRACKING AN ANIMAL USING MICRORADIOS - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 11-10-2011 |
20110273030 | HIGH POWER BIPOLAR PULSE GENERATORS - A bipolar pulse generator is implemented in a simple structure while providing a high efficiency design having a relatively low total size, while still allowing access by fibers used to control a photoconductive switch that activates the generator. The bipolar pulse generator includes a stacked Blumlein generator structure with an additional transmission line connected to a load at its near end and short-circuited at its distal end. An extra transmission line is positioned between the Blumlein generator's structure and the load provides specified limited gap between positive and negative sub-pulses. The bipolar pulse generator further includes a bended Blumlein generator structure, in which an existing intrinsic “stray” transmission line is used to provide the bipolar pulse. Still further, bipolar pulse generator includes stepped transmission lines, with additional switches positioned between steps, which are charged by different voltages. | 11-10-2011 |
20110273029 | HIGH POWER BIPOLAR PULSE GENERATORS - A bipolar pulse generator is implemented in a simple structure while providing a high efficiency design having a relatively low total size, while still allowing access by fibers used to control a photoconductive switch that activates the generator. The bipolar pulse generator includes a stacked Blumlein generator structure with an additional transmission line connected to a load at its near end and short-circuited at its distal end. An extra transmission line is positioned between the Blumlein generator's structure and the load provides specified limited gap between positive and negative sub-pulses. The bipolar pulse generator further includes a bended Blumlein generator structure, in which an existing intrinsic “stray” transmission line is used to provide the bipolar pulse. Still further, bipolar pulse generator includes stepped transmission lines, with additional switches positioned between steps, which are charged by different voltages. | 11-10-2011 |
20110273028 | HIGH POWER BIPOLAR PULSE GENERATORS - A bipolar pulse generator is implemented in a simple structure while providing a high efficiency design having a relatively low total size, while still allowing access by fibers used to control a photoconductive switch that activates the generator. The bipolar pulse generator includes a stacked Blumlein generator structure with an additional transmission line connected to a load at its near end and short-circuited at its distal end. An extra transmission line is positioned between the Blumlein generator's structure and the load provides specified limited gap between positive and negative sub-pulses. The bipolar pulse generator further includes a bended Blumlein generator structure, in which an existing intrinsic “stray” transmission line is used to provide the bipolar pulse. Still further, bipolar pulse generator includes stepped transmission lines, with additional switches positioned between steps, which are charged by different voltages. | 11-10-2011 |
20110273027 | HIGH POWER BIPOLAR PULSE GENERATORS - A bipolar pulse generator is implemented in a simple structure while providing a high efficiency design having a relatively low total size, while still allowing access by fibers used to control a photoconductive switch that activates the generator. The bipolar pulse generator includes a stacked Blumlein generator structure with an additional transmission line connected to a load at its near end and short-circuited at its distal end. An extra transmission line is positioned between the Blumlein generator's structure and the load provides specified limited gap between positive and negative sub-pulses. The bipolar pulse generator further includes a bended Blumlein generator structure, in which an existing intrinsic “stray” transmission line is used to provide the bipolar pulse. Still further, bipolar pulse generator includes stepped transmission lines, with additional switches positioned between steps, which are charged by different voltages. | 11-10-2011 |
20110269408 | METHOD OF DETERMINING CONDITIONS ON THE GROUND USING MICRORADIOS - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 11-03-2011 |
20110269401 | METHOD FOR MEASURING FLUID FLOW IN A NON-CONDUCTIVE PIPE - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 11-03-2011 |
20110267235 | METHOD OF TRACKING A VEHICLE USING MICRORADIOS - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 11-03-2011 |
20110266888 | Bipolar Pulse Generators With Voltage Multiplication - A bipolar pulse generator includes two, two-conductor transmission lines coupled together with a load positioned between the two transmission lines. Each conductor of a transmission line we define as a segment. Two segments of one transmission line are charged and switchably coupled to two segments of the other transmission line to produce a bipolar pulse on the matched load. This bipolar pulse generator may be implemented in a flat or a folded design. The generator may include two transmission line structures coupled together with a load positioned between each transmission line structures. The first transmission line structure may include a stepped transmission line and an embedded transmission line segment. A switch may be coupled between the embedded transmission line segment and another segment of the transmission line structure. During operation, the first transmission line structure may be charged to a potential with the switch in the open position and, when the switch is closed, the charge on the first transmission line structure together with the second transmission line structure generates a bipolar pulse on the matched load. | 11-03-2011 |
20110266887 | Bipolar Pulse Generators With Voltage Multiplication - A bipolar pulse generator includes two, two-conductor transmission lines coupled together with a load positioned between the two transmission lines. Each conductor of a transmission line we define as a segment. Two segments of one transmission line are charged and switchably coupled to two segments of the other transmission line to produce a bipolar pulse on the matched load. This bipolar pulse generator may be implemented in a flat or a folded design. The generator may include two transmission line structures coupled together with a load positioned between each transmission line structures. The first transmission line structure may include a stepped transmission line and an embedded transmission line segment. A switch may be coupled between the embedded transmission line segment and another segment of the transmission line structure. During operation, the first transmission line structure may be charged to a potential with the switch in the open position and, when the switch is closed, the charge on the first transmission line structure together with the second transmission line structure generates a bipolar pulse on the matched load. | 11-03-2011 |
20110265314 | METHOD OF MANUFACTURING A MICRORADIO - A microradio is provided with a hysteretic switch to permit an optimum range increasing charging cycle, with the charging cycle being long relative to the transmit cycle. Secondly, an ensemble of microradios permits an n | 11-03-2011 |
20110262876 | METHOD AND APPARATUS FOR APPLYING A MID-IR GRADED-INDEX MICROSTRUCTURE TO AN OPTICAL FIBER TIP TO ACHIEVE ANTI-REFLECTIVE PROPERTIES - A method and apparatus for applying a mid-IR graded microstructure to the end of an As2S3 optical fiber are presented herein. The method and apparatus transfer a microstructure from a negative imprint on a nickel shim to an As2S3 fiber tip with minimal shape distortion and minimal damage-threshold impact resulting in large gains in anti-reflective properties. | 10-27-2011 |
20110256663 | High Speed, High Density, Low Power Die Interconnect System - A system for interconnecting at least two die each die having a plurality of conducting layers and dielectric layers disposed upon a substrate which may include active and passive elements. In one embodiment there is at least one interconnect coupling at least one conducting layer on a side of one die to at least one conducting layer on a side of the other die. Another interconnect embodiment is a slug having conducting and dielectric layers disposed between two or more die to interconnect between the die. Other interconnect techniques include direct coupling such as rod, ball, dual balls, bar, cylinder, bump, slug, and carbon nanotube, as well as indirect coupling such as inductive coupling, capacitive coupling, and wireless communications. The die may have features to facilitate placement of the interconnects such as dogleg cuts, grooves, notches, enlarged contact pads, tapered side edges and stepped vias. | 10-20-2011 |
20110254607 | Method And Apparatus For Digital Synthesis Of Long Multi-Cycle Microwave Pulses - Conductive segments (transmission line conductors) are positioned within a transmission line structure in order to generate multi-cycle microwave pulses. The conductor segments are switchably coupled to one or the other conductor of the transmission lines, inside the transmission line structure. Microwave pulses may be induced in the transmission line by closing the switches in a controlled manner to discharge successive segments, or successive groups of segments, into the transmission lines. The induced pulses travel uninterrupted along the transmission lines in a desired direction to the load. Efficiency of systems and energy delivered to the load in multi-section transmission lines is increased and/or maximized by adjusting the ratio of characteristic impedances associated with the transmission line conductor segments according to an optimum ratio. | 10-20-2011 |
20110254162 | High Speed, High Density, Low Power Die Interconnect System - A system for interconnecting at least two die each die having a plurality of conducting layers and dielectric layers disposed upon a substrate which may include active and passive elements. In one embodiment there is at least one interconnect coupling at least one conducting layer on a side of one die to at least one conducting layer on a side of the other die. Another interconnect embodiment is a slug having conducting and dielectric layers disposed between two or more die to interconnect between the die. Other interconnect techniques include direct coupling such as rod, ball, dual balls, bar, cylinder, bump, slug, and carbon nanotube, as well as indirect coupling such as inductive coupling, capacitive coupling, and wireless communications. The die may have features to facilitate placement of the interconnects such as dogleg cuts, grooves, notches, enlarged contact pads, tapered side edges and stepped vias. | 10-20-2011 |
20110253881 | Interface Techniques for Coupling a Sensor to a Readout Circuit - Techniques are disclosed that can be used to interface a sensor circuit with readout circuitry. The techniques can be employed, for instance, with microchannel plate (MCP) based devices used in numerous sensing/detection applications, and are particularly suitable for applications where it is desirable to interface an MCP having a relatively large active area to a readout circuit having a relatively smaller active area. The interface effectively decouples anode geometry from readout circuit geometry and also may be configured with flexible anode pad geometry, which allows for compensation of optical blur variations as well as a very high fill factor. The interface can be made using standard semiconductor materials and photolithography techniques and can be configured with thermal expansion qualities that closely track or otherwise match that of the readout circuitry. | 10-20-2011 |
20110235742 | HIGH POWER PULSE GENERATOR - A systems, pulse generators, apparatus and methods for generating a high power signal are presented. A pulse generator includes a generator and a modulator unit. The generator generates a bipolar signal. The modulator unit modulates the bipolar signal with oscillating signals to generate a modulated bipolar signal with oscillating portions. The frequency spectrum of the modulated bipolar signal contains very little to no direct current (DC) component. | 09-29-2011 |
20110233380 | MONOLITHICALLY INTEGRATED LIGHT-ACTIVED THYRISTOR AND METHOD - A monolithically integrated light-activated thyristor in an n-p-n-p-n-p sequence consists of a four-layered thyristor structure and an embedded back-biased PN junction structure as a turn-off switching diode. The turn-off switching diode is formed through structured doping processes and/or depositions on a single semiconductor wafer so that it is integrated monolithically without any external device or semiconducter materials. The thyristor can be switching on and off optically by two discrete light beams illuminated on separated openings of electrodes on the top surface of a semiconductor body. The carrier injection of the turning on process is achieved by illuminating the bulk of the thyristor with a high level light through the first aperture over the cathode to create high density charge carriers serving as the gate current injection and to electrically short the emitter and drift layer. The switching off of the thyristor is achieved by shorting the base layer and the cathode layer by illuminating the embedded back-biased PN junction of the TURN-OFF switching diode. The patterned doping profile and the interconnect between the emitter and the base region of the light activated thyristor makes possible a monolithic and/or plantar integrated fabrication of the semiconductor switching device on a single semiconductor wafer via the standard semiconductor fabrication process. | 09-29-2011 |
20110220753 | METHOD AND APPARATUS FOR FAST DEPLOYING AND RETRIEVING OF TOWED BODIES - In a method and apparatus for controlling the deployment of a towline connecting a mooring craft to an ejected object comprising the steps of monitoring velocity to determine when a point for optimum braking has been achieved and then engaging a brake system to retard deployment of the towline, a DC motor augments and controls the brake system. The DC motor further controls the retrieval of the object. A cutter mechanism uses a first blade to grip the towing cable to maintain tension thereon as a second blade cuts the cable. A spring biased boom in combination with spring biased fins on the ejected object rapidly deploys the object from its storage housing. A locking mechanism secures the deployment mechanism in a stable locked position upon the object reaching its fully extended position. | 09-15-2011 |
20110211472 | TOPOLOGY AWARE MANET FOR MOBILE NETWORKS - Systems and methods provide adaptability in a mobile ad hoc network (MANET), based on an existing protocol, such as adaptive hybrid domain routing (AHDR). The systems and methods are especially suited for fast changing topologies that may change after a reactive route discovery has been completed. | 09-01-2011 |
20110204145 | Method And Apparatus For Protecting Vehicles And Personnel Against Incoming Projectiles - A projector of multiple skewed light planes or sheets is located adjacent a vehicle to be protected and detectors are arranged to defect the penetration of the light sheets by an incoming object, with the time intervals between the piercing of the planes defining the path of the incoming object and its expected impact time. An array of bullet-firing barrels is arranged to project bullets in ah iron curtain under control of a fire control module that fires a round in a barrel above the projected flight path such that the round impacts the nose of the object and disables it. It is thus the piercing of the skewed light sheets mat provides information as to the impact point of the object as well as its time of arrival so that a round can be fired to intercept the object as it arrives at the iron curtain. | 08-25-2011 |
20110194402 | METHOD AND APPARATUS FOR WAVEFORM INDEPENDENT RANGING - A system and method for calculating a time of arrival (TOA) of an electromagnetic signal is presented. A method receives a fast Fourier transform (FFT) signal that is a FFT of an original electromagnetic signal containing symbol data. The FFT signal is either multiplied or divided with a value to remove the symbol data. Removing the symbol data generates a perturbed data values representing perturbed signal with a perturbed covariance. The method calculates a perturbed covariance of the perturbed data values. After the perturbed covariance is calculated, the method at least partially corrects the perturbed covariance to produce a corrected covariance. The TOA of the original electromagnetic signal is calculated based, at least in part, on the perturbed covariance. | 08-11-2011 |
20110187363 | METHOD AND APPARATUS FOR SENSING THE PRESENCE OF EXPLOSIVES, CONTRABAND AND OTHER MOLECULES USING NUCLEAR QUADRUPOLE RESONANCE - Stimulated emissions due to nuclear quadropole resonance are detected utilizing a terminated balanced transmission line and a directional coupler for the detection of explosives, contraband, narcotics and the like that exist between the transmission lines, with either a stepped frequency generator utilized to scan between 100 KHz and 10 MHz, or wherein parallel fixed frequency sources are coupled to the transmission line, thereby to permit correlation with expected lines, with the frequency sources being low power so as to not create a safety hazard and so as not to interfere with radiation sensitive devices such as film or electronic circuits that are in the vicinity of the balanced transmission line. | 08-04-2011 |
20110185419 | METHOD AND APPARATUS FOR DETECTING SSH LOGIN ATTACKS - A digital filter correlation engine, wherein the correlation engine combines N arbitrary digital filter states based on the weights and along with a threshold generate a network incident. This network incident in turn can be feedback to another digital filter. This multi-layering capability allows the creation of higher level event detections that are time-based for a cyber security analyst to analyze, thereby reducing the amount of manual work the analyst has to do in inspecting behaviors within the network. | 07-28-2011 |
20110185418 | DIGITAL FILTER CORRELATION ENGINE - A digital filter correlation engine, wherein the correlation engine combines N arbitrary digital filter states based on the weights and along with a threshold generate a network incident. This network incident in turn can be feedback to another digital filter. This multi-layering capability allows the creation of higher level event detections that are time-based for a cyber security analyst to analyze, thereby reducing the amount of manual work the analyst has to do in inspecting behaviors within the network. | 07-28-2011 |
20110183622 | CHIRP FOURIER TRANSFORM METHOD AND APPARATUS FOR CANCELING WIDE BAND INTERFERENCE - A wide band frequency domain canceller is used in cosite mitigation interference in which a signal tapped from a transmit antenna is coupled to a Chirp Fourier Transform to covert the signal into the frequency domain. The frequency domain signal is vector multiplied with a path transform function to add the path transfer function values to the sampled signal, after which the processed frequency domain signal is converted back into the time domain by an Inverse Chirp Fourier Transform, after which it is inverted and coupled into the receive path of a cosited receiver. | 07-28-2011 |
20110183300 | LASER BACKRANGE AND MARKSMANSHIP APPARATUS AND METHOD - Methods and systems are provided for making more accurate range and marksmanship determinations in laser-based military engagements. These methods and systems allow a shooter and a target in a laser engagement system to be paired with one another in a substantially unambiguous manner. Such pairing allows the lasers to be used at full power and is particularly well suited for clustered environments in which multiple combatants may be in close proximity to one another. The methods and systems are also particularly well suited for testing new or experimental weapon systems by virtue of the more accurate range and marksmanship estimates provided. | 07-28-2011 |
20110176205 | INTEGRATED TELESCOPE BAFFLE AND MIRROR SUPPORT - A telescope design having an integrated baffle is disclosed herein. The integrated baffle is configured as both a baffle and a mirror support. The integrated baffle can be shaped to the F-cone between the primary and secondary mirrors of a given telescope design. The baffle design can be adjusted to minimize or otherwise reduce the total obscuration of the baffle to improve the optical throughput. The interior facing surfaces of the integrated baffle can be configured with corner reflectors, so that the detector views itself, instead of the baffle. | 07-21-2011 |
20110171374 | Dispersion-Compensated Infra Red Cloak (D-CIRC) - A method of achieving electromagnetic cloaking of an object comprising the step of coating said object with a metal-dielectric composite material including a dielectric component, wherein the dielectric component is comprised of a material exhibiting anomalous dispersion in a wide wavelength range. | 07-14-2011 |